Cmod A7-35 support

This adds support for the Digilane Cmod A7-35.

I had to use the MMCM because the clock (12 MHz) is below the PLL
minimum of 19 MHz.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
pull/19/head
Anton Blanchard 5 years ago committed by Anton Blanchard
parent 14da542d4a
commit 270d7b1b9a

@ -0,0 +1,76 @@
library ieee;
use ieee.std_logic_1164.all;

Library UNISIM;
use UNISIM.vcomponents.all;

entity clock_generator is
generic (
clk_period_hz : positive := 12000000);
port (
ext_clk : in std_logic;
pll_rst_in : in std_logic;
pll_clk_out : out std_logic;
pll_locked_out : out std_logic);
end entity clock_generator;

architecture rtl of clock_generator is
signal clkfb : std_ulogic;

type pll_settings_t is record
clkin_period : real range 10.000 to 800.0;
clkfbout_mult : real range 2.0 to 64.0;
clkout_divide : real range 1.0 to 128.0;
divclk_divide : integer range 1 to 106;
end record pll_settings_t;

function gen_pll_settings (
constant freq_hz : positive)
return pll_settings_t is
begin
if freq_hz = 100000000 then
return (clkin_period => 10.0,
clkfbout_mult => 16.0,
clkout_divide => 32.0,
divclk_divide => 1);
elsif freq_hz = 12000000 then
return (clkin_period => 83.33,
clkfbout_mult => 50.0,
clkout_divide => 12.0,
divclk_divide => 1);
else
report "Unsupported input frequency" severity failure;
end if;
end function gen_pll_settings;

constant pll_settings : pll_settings_t := gen_pll_settings(clk_period_hz);
begin
pll : MMCME2_BASE
generic map (
BANDWIDTH => "OPTIMIZED",
CLKFBOUT_MULT_F => pll_settings.clkfbout_mult,
CLKIN1_PERIOD => pll_settings.clkin_period,
CLKOUT0_DIVIDE_F => pll_settings.clkout_divide,
DIVCLK_DIVIDE => pll_settings.divclk_divide,
STARTUP_WAIT => FALSE)
port map (
CLKFBOUT => clkfb,
CLKFBOUTB => open,
CLKOUT0 => pll_clk_out,
CLKOUT0B => open,
CLKOUT1 => open,
CLKOUT1B => open,
CLKOUT2 => open,
CLKOUT2B => open,
CLKOUT3 => open,
CLKOUT3B => open,
CLKOUT4 => open,
CLKOUT5 => open,
CLKOUT6 => open,
LOCKED => pll_locked_out,
CLKFBIN => clkfb,
CLKIN1 => ext_clk,
PWRDWN => '0',
RST => pll_rst_in
);
end architecture rtl;

@ -0,0 +1,8 @@
## Clock signal 12 MHz
set_property -dict { PACKAGE_PIN L17 IOSTANDARD LVCMOS33 } [get_ports { ext_clk }];
create_clock -add -name sys_clk_pin -period 83.33 -waveform {0 41.66} [get_ports {ext_clk}];

set_property -dict { PACKAGE_PIN J18 IOSTANDARD LVCMOS33 } [get_ports { uart0_txd }];
set_property -dict { PACKAGE_PIN J17 IOSTANDARD LVCMOS33 } [get_ports { uart0_rxd }];

set_property -dict { PACKAGE_PIN A18 IOSTANDARD LVCMOS33 } [get_ports { ext_rst }];

@ -55,6 +55,10 @@ filesets:
- fpga/arty_a7-35.xdc : {file_type : xdc} - fpga/arty_a7-35.xdc : {file_type : xdc}
- fpga/clk_gen_plle2.vhd : {file_type : vhdlSource-2008} - fpga/clk_gen_plle2.vhd : {file_type : vhdlSource-2008}


cmod_a7-35:
files:
- fpga/cmod_a7-35.xdc : {file_type : xdc}
- fpga/clk_gen_mcmm.vhd : {file_type : vhdlSource-2008}


targets: targets:
nexys_a7: nexys_a7:
@ -81,6 +85,14 @@ targets:
vivado: {part : xc7a35ticsg324-1L} vivado: {part : xc7a35ticsg324-1L}
toplevel : toplevel toplevel : toplevel


cmod_a7-35:
default_tool: vivado
filesets: [core, cmod_a7-35, soc]
parameters : [memory_size, ram_init_file, reset_low=false]
tools:
vivado: {part : xc7a35tcpg236-1}
toplevel : toplevel

synth: synth:
filesets: [core] filesets: [core]
tools: tools:
@ -97,3 +109,8 @@ parameters:
datatype : file datatype : file
description : Initial on-chip RAM contents description : Initial on-chip RAM contents
paramtype : generic paramtype : generic

reset_low:
datatype : bool
description : External reset button polarity
paramtype : generic

Loading…
Cancel
Save