Add ASIC target

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>

Makefile

@@ -55,15 +55,18 @@ all = core_tb icache_tb dcache_tb dmi_dtm_tb \
 
 all: $(all)
 
-core_files = decode_types.vhdl common.vhdl wishbone_types.vhdl fetch1.vhdl \
+base_core_files = decode_types.vhdl common.vhdl wishbone_types.vhdl fetch1.vhdl \
-	utils.vhdl plru.vhdl cache_ram.vhdl icache.vhdl \
+	utils.vhdl plru.vhdl icache.vhdl \
 	decode1.vhdl helpers.vhdl insn_helpers.vhdl \
-	control.vhdl decode2.vhdl register_file.vhdl \
+	control.vhdl decode2.vhdl \
 	cr_file.vhdl crhelpers.vhdl ppc_fx_insns.vhdl rotator.vhdl \
-	logical.vhdl countbits.vhdl multiply.vhdl divider.vhdl execute1.vhdl \
+	logical.vhdl countbits.vhdl divider.vhdl execute1.vhdl \
 	loadstore1.vhdl mmu.vhdl dcache.vhdl writeback.vhdl core_debug.vhdl \
 	core.vhdl fpu.vhdl pmu.vhdl
 
+core_files = $(base_core_files) register_file.vhdl cache_ram.vhdl multiply.vhdl
+asic_core_files = $(base_core_files) asic/register_file.vhdl asic/cache_ram.vhdl asic/multiply.vhdl
+
 soc_files = wishbone_arbiter.vhdl wishbone_bram_wrapper.vhdl sync_fifo.vhdl \
 	wishbone_debug_master.vhdl xics.vhdl syscon.vhdl gpio.vhdl soc.vhdl \
 	spi_rxtx.vhdl spi_flash_ctrl.vhdl
@@ -218,7 +221,6 @@ GHDL_IMAGE_GENERICS=-gMEMORY_SIZE=$(MEMORY_SIZE) -gRAM_INIT_FILE=$(RAM_INIT_FILE
 	-gRESET_LOW=$(RESET_LOW) -gCLK_INPUT=$(CLK_INPUT) -gCLK_FREQUENCY=$(CLK_FREQUENCY) -gICACHE_NUM_LINES=$(ICACHE_NUM_LINES) \
 	$(LITEDRAM_GHDL_ARG)
 
-
 ifeq ($(FPGA_TARGET), verilator)
 RESET_LOW=true
 CLK_INPUT=50000000
@@ -226,22 +228,41 @@ CLK_FREQUENCY=50000000
 clkgen=fpga/clk_gen_bypass.vhd
 endif
 
+ifeq ($(FPGA_TARGET), caravel)
+MEMORY_SIZE=4096
+RESET_LOW=true
+CLK_INPUT=100000000
+CLK_FREQUENCY=100000000
+endif
+
 fpga_files = fpga/soc_reset.vhdl \
 	fpga/pp_fifo.vhd fpga/pp_soc_uart.vhd fpga/main_bram.vhdl \
 	nonrandom.vhdl
 
+asic_files = fpga/pp_fifo.vhd fpga/pp_soc_uart.vhd asic/main_bram.vhdl \
+	asic/top-asic.vhdl $(dmi_dtm) nonrandom.vhdl
+
 synth_files = $(core_files) $(soc_files) $(soc_extra_synth) $(fpga_files) $(clkgen) $(toplevel) $(dmi_dtm)
 
+asic_synth_files = $(asic_core_files) $(soc_files) $(asic_files)
+
 microwatt.json: $(synth_files) $(RAM_INIT_FILE)
 	$(YOSYS) $(GHDLSYNTH) -p "ghdl --std=08 --no-formal $(GHDL_IMAGE_GENERICS) $(synth_files) -e toplevel; read_verilog $(uart_files) $(soc_extra_v); synth_ecp5 -abc9 -nowidelut -json $@  $(SYNTH_ECP5_FLAGS)"
 
 microwatt.v: $(synth_files) $(RAM_INIT_FILE)
 	$(YOSYS) $(GHDLSYNTH) -p "ghdl --std=08 --no-formal $(GHDL_IMAGE_GENERICS) $(synth_files) -e toplevel; write_verilog $@"
 
+microwatt_asic.v: $(asic_synth_files)
+	$(YOSYS) $(GHDLSYNTH) -p "ghdl --std=08 --no-formal $(GHDL_IMAGE_GENERICS) $(asic_synth_files) -e toplevel; write_verilog $@"
+
 microwatt-verilator: microwatt.v verilator/microwatt-verilator.cpp verilator/uart-verilator.c
 	$(VERILATOR) $(VERILATOR_FLAGS) -CFLAGS "$(VERILATOR_CFLAGS) -DCLK_FREQUENCY=$(CLK_FREQUENCY)" -Iuart16550 --assert --cc --exe --build $^ -o $@ -top-module toplevel
 	@cp -f obj_dir/microwatt-verilator microwatt-verilator
 
+microwatt_asic-verilator: microwatt_asic.v asic/microwatt_asic-verilator.cpp verilator/uart-verilator.c
+	$(VERILATOR) $(VERILATOR_FLAGS) -CFLAGS "$(VERILATOR_CFLAGS) -DCLK_FREQUENCY=$(CLK_FREQUENCY)" -Iuart16550 -Iasic/behavioural --assert --cc --exe --build $^ -o $@ -top-module toplevel
+	@cp -f obj_dir/microwatt_asic-verilator microwatt_asic-verilator
+
 microwatt_out.config: microwatt.json $(LPF)
 	$(NEXTPNR) --json $< --lpf $(LPF) --textcfg $@.tmp $(NEXTPNR_FLAGS) --package $(PACKAGE)
 	mv -f $@.tmp $@
@@ -324,6 +345,7 @@ _clean:
 	rm -f scripts/mw_debug/mw_debug
 	rm -f microwatt.bin microwatt.json microwatt.svf microwatt_out.config
 	rm -f microwatt.v microwatt-verilator
+	rm -f microwatt_asic.v microwatt_asic-verilator
 	rm -rf obj_dir/
 
 clean: _clean

asic/microwatt_asic-verilator.cpp

@@ -0,0 +1,83 @@
+#include <stdlib.h>
+#include "Vtoplevel.h"
+#include "verilated.h"
+#include "verilated_vcd_c.h"
+
+/*
+ * Current simulation time
+ * This is a 64-bit integer to reduce wrap over issues and
+ * allow modulus.  You can also use a double, if you wish.
+ */
+vluint64_t main_time = 0;
+
+/*
+ * Called by $time in Verilog
+ * converts to double, to match
+ * what SystemC does
+ */
+double sc_time_stamp(void)
+{
+	return main_time;
+}
+
+#if VM_TRACE
+VerilatedVcdC *tfp;
+#endif
+
+void tick(Vtoplevel *top)
+{
+	top->ext_clk = 1;
+	top->eval();
+#if VM_TRACE
+	if (tfp)
+		tfp->dump((double) main_time);
+#endif
+	main_time++;
+
+	top->ext_clk = 0;
+	top->eval();
+#if VM_TRACE
+	if (tfp)
+		tfp->dump((double) main_time);
+#endif
+	main_time++;
+}
+
+void uart_tx(unsigned char tx);
+unsigned char uart_rx(void);
+
+int main(int argc, char **argv)
+{
+	Verilated::commandArgs(argc, argv);
+
+	// init top verilog instance
+	Vtoplevel* top = new Vtoplevel;
+
+#if VM_TRACE
+	// init trace dump
+	Verilated::traceEverOn(true);
+	tfp = new VerilatedVcdC;
+	top->trace(tfp, 99);
+	tfp->open("microwatt-verilator.vcd");
+#endif
+
+	// Reset
+	top->ext_rst = 0;
+	for (unsigned long i = 0; i < 5; i++)
+		tick(top);
+	top->ext_rst = 1;
+
+	while(!Verilated::gotFinish()) {
+		tick(top);
+
+		uart_tx(top->uart0_txd);
+		top->uart0_rxd = uart_rx();
+	}
+
+#if VM_TRACE
+	tfp->close();
+	delete tfp;
+#endif
+
+	delete top;
+}

asic/top-asic.vhdl

@@ -0,0 +1,127 @@
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.numeric_std.all;
+
+library work;
+use work.wishbone_types.all;
+
+entity toplevel is
+    generic (
+        MEMORY_SIZE        : integer  := 8192;
+        RAM_INIT_FILE      : string   := "firmware.hex";
+        RESET_LOW          : boolean  := true;
+        CLK_INPUT          : positive := 100000000;
+        CLK_FREQUENCY      : positive := 100000000;
+        HAS_FPU            : boolean  := true;
+        HAS_BTC            : boolean  := false;
+        NO_BRAM            : boolean  := false;
+        DISABLE_FLATTEN_CORE : boolean := false;
+        ALT_RESET_ADDRESS  : std_logic_vector(63 downto 0) := (27 downto 0 => '0', others => '1');
+        SPI_FLASH_OFFSET   : integer := 0;
+        SPI_FLASH_DEF_CKDV : natural := 4;
+        SPI_FLASH_DEF_QUAD : boolean := false;
+        SPI_BOOT_CLOCKS    : boolean := false;
+        LOG_LENGTH         : natural := 0;
+        UART_IS_16550      : boolean := true;
+        HAS_UART1          : boolean := false;
+        ICACHE_NUM_LINES   : natural := 4;
+        ICACHE_NUM_WAYS    : natural := 1;
+        ICACHE_TLB_SIZE    : natural := 4;
+        DCACHE_NUM_LINES   : natural := 4;
+        DCACHE_NUM_WAYS    : natural := 1;
+        DCACHE_TLB_SET_SIZE : natural := 2;
+        DCACHE_TLB_NUM_WAYS : natural := 2;
+        HAS_GPIO           : boolean := true;
+        NGPIO              : natural := 32
+        );
+    port(
+        ext_clk   : in  std_ulogic;
+        ext_rst   : in  std_ulogic;
+
+        -- UART0 signals:
+        uart0_txd : out std_ulogic;
+        uart0_rxd : in  std_ulogic;
+
+        -- SPI
+        spi_flash_cs_n    : out std_ulogic;
+        spi_flash_clk     : out std_ulogic;
+        spi_flash_sdat_i  : in std_ulogic_vector(3 downto 0);
+        spi_flash_sdat_o  : out std_ulogic_vector(3 downto 0);
+        spi_flash_sdat_oe : out std_ulogic_vector(3 downto 0);
+
+        -- GPIO
+        gpio_in  : in std_ulogic_vector(NGPIO - 1 downto 0);
+        gpio_out : out std_ulogic_vector(NGPIO - 1 downto 0);
+        gpio_dir : out std_ulogic_vector(NGPIO - 1 downto 0);
+
+        -- Add an I/O pin to select fetching from flash on reset
+        alt_reset      : in std_ulogic
+        );
+end entity toplevel;
+
+architecture behaviour of toplevel is
+    -- reset signals
+    signal system_rst : std_ulogic;
+begin
+
+    system_rst <= not ext_rst when RESET_LOW else ext_rst;
+
+    -- Main SoC
+    soc0: entity work.soc
+        generic map(
+            MEMORY_SIZE        => MEMORY_SIZE,
+            RAM_INIT_FILE      => RAM_INIT_FILE,
+            SIM                => false,
+            CLK_FREQ           => CLK_FREQUENCY,
+            HAS_FPU            => HAS_FPU,
+            HAS_BTC            => HAS_BTC,
+            HAS_DRAM           => false,
+            DRAM_SIZE          => 0,
+            DRAM_INIT_SIZE     => 0,
+            DISABLE_FLATTEN_CORE => DISABLE_FLATTEN_CORE,
+            ALT_RESET_ADDRESS  => ALT_RESET_ADDRESS,
+            HAS_SPI_FLASH      => true,
+            SPI_FLASH_DLINES   => 4,
+            SPI_FLASH_OFFSET   => SPI_FLASH_OFFSET,
+            SPI_FLASH_DEF_CKDV => SPI_FLASH_DEF_CKDV,
+            SPI_FLASH_DEF_QUAD => SPI_FLASH_DEF_QUAD,
+            SPI_BOOT_CLOCKS    => SPI_BOOT_CLOCKS,
+            LOG_LENGTH         => LOG_LENGTH,
+            UART0_IS_16550     => UART_IS_16550,
+            HAS_UART1          => HAS_UART1,
+            HAS_GPIO           => HAS_GPIO,
+            NGPIO              => NGPIO,
+            ICACHE_NUM_LINES   => ICACHE_NUM_LINES,
+            ICACHE_NUM_WAYS    => ICACHE_NUM_WAYS,
+            ICACHE_TLB_SIZE    => ICACHE_TLB_SIZE,
+            DCACHE_NUM_LINES   => DCACHE_NUM_LINES,
+            DCACHE_NUM_WAYS    => DCACHE_NUM_WAYS,
+            DCACHE_TLB_SET_SIZE => DCACHE_TLB_SET_SIZE,
+            DCACHE_TLB_NUM_WAYS => DCACHE_TLB_NUM_WAYS
+            )
+        port map (
+            -- System signals
+            system_clk        => ext_clk,
+            rst               => system_rst,
+
+            -- UART signals
+            uart0_txd         => uart0_txd,
+            uart0_rxd         => uart0_rxd,
+
+            -- SPI signals
+            spi_flash_sck     => spi_flash_clk,
+            spi_flash_cs_n    => spi_flash_cs_n,
+            spi_flash_sdat_o  => spi_flash_sdat_o,
+            spi_flash_sdat_oe => spi_flash_sdat_oe,
+            spi_flash_sdat_i  => spi_flash_sdat_i,
+
+            -- GPIO signals
+            gpio_in           => gpio_in,
+            gpio_out          => gpio_out,
+            gpio_dir          => gpio_dir,
+
+            -- Reset PC to flash offset 0 (ie 0xf000000)
+            alt_reset         => alt_reset
+            );
+
+end architecture behaviour;