decode1: Remove stash buffer

Now that the timing of the busy signal from decode2 doesn't depend on
register numbers or downstream instruction completion, we no longer
need the stash buffer on the output of decode1.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

decode1.vhdl

@@ -30,7 +30,6 @@ end entity decode1;
 
 architecture behaviour of decode1 is
     signal r, rin : Decode1ToDecode2Type;
-    signal s      : Decode1ToDecode2Type;
     signal f, fin : Decode1ToFetch1Type;
 
     constant illegal_inst : decode_rom_t :=
@@ -46,7 +45,6 @@ architecture behaviour of decode1 is
         (override => '0', override_decode => illegal_inst, override_unit => '0', force_single => '0');
 
     signal ri, ri_in : reg_internal_t;
-    signal si        : reg_internal_t;
 
     type br_predictor_t is record
         br_nia    : std_ulogic_vector(61 downto 0);
@@ -555,27 +553,13 @@ begin
         if rising_edge(clk) then
             if rst = '1' then
                 r <= Decode1ToDecode2Init;
-                s <= Decode1ToDecode2Init;
                 ri <= reg_internal_t_init;
-                si <= reg_internal_t_init;
             elsif flush_in = '1' then
                 r.valid <= '0';
-                s.valid <= '0';
-            elsif s.valid = '1' then
-                if stall_in = '0' then
-                    r <= s;
-                    ri <= si;
-                    s.valid <= '0';
-                end if;
-            else
-                s <= rin;
-                si <= ri_in;
-                s.valid <= rin.valid and r.valid and stall_in;
-                if r.valid = '0' or stall_in = '0' then
+            elsif stall_in = '0' then
                 r <= rin;
                 ri <= ri_in;
             end if;
-            end if;
             if rst = '1' then
                 br.br_nia <= (others => '0');
                 br.br_offset <= (others => '0');
@@ -585,7 +569,7 @@ begin
             end if;
         end if;
     end process;
-    busy_out <= s.valid;
+    busy_out <= stall_in;
 
     decode1_1: process(all)
         variable v : Decode1ToDecode2Type;