simple_ram: Add pipelining support

The generic PIPELINE_DEPTH can be set to 0 to keep it operating
as a non-pipelined slave, or a larger value indicating
the amount of extra cycles between requests and acks.

It will always generate a valid stall signal, so it can be used
in either mode with a pipelined master (but only in non-pipelined
mode with a non-pipelined master).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
pull/118/head
Benjamin Herrenschmidt 5 years ago
parent df1a9237f6
commit 37acb35773

@ -10,7 +10,8 @@ use work.simple_ram_behavioural_helpers.all;
entity mw_soc_memory is
generic (
RAM_INIT_FILE : string;
MEMORY_SIZE : integer
MEMORY_SIZE : integer;
PIPELINE_DEPTH : integer := 0
);

port (
@ -29,48 +30,101 @@ architecture behave of mw_soc_memory is
signal ret_ack : std_ulogic := '0';
signal identifier : integer := behavioural_initialize(filename => RAM_INIT_FILE, size => MEMORY_SIZE);
signal reload : integer := 0;
signal ret_dat : wishbone_data_type;

subtype pipe_idx_t is integer range 0 to PIPELINE_DEPTH-1;
type pipe_ack_t is array(pipe_idx_t) of std_ulogic;
type pipe_dat_t is array(pipe_idx_t) of wishbone_data_type;
begin
wishbone_process: process(clk)
variable ret_dat: std_ulogic_vector(63 downto 0) := (others => '0');
variable adr: std_ulogic_vector(63 downto 0);

pipe_big: if PIPELINE_DEPTH > 1 generate
signal pipe_ack : pipe_ack_t;
signal pipe_dat : pipe_dat_t;
begin
wishbone_out.stall <= '0';
wishbone_out.ack <= pipe_ack(0);
wishbone_out.dat <= pipe_dat(0);

pipe_big_sync: process(clk)
begin
if rising_edge(clk) then
pipe_stages: for i in 0 to PIPELINE_DEPTH-2 loop
pipe_ack(i) <= pipe_ack(i+1);
pipe_dat(i) <= pipe_dat(i+1);
end loop;
pipe_ack(PIPELINE_DEPTH-1) <= ret_ack;
pipe_dat(PIPELINE_DEPTH-1) <= ret_dat;
end if;
end process;
end generate;

pipe_one: if PIPELINE_DEPTH = 1 generate
signal pipe_ack : std_ulogic;
signal pipe_dat : wishbone_data_type;
begin
wishbone_out.stall <= '0';
wishbone_out.ack <= pipe_ack;
wishbone_out.dat <= pipe_dat;

pipe_one_sync: process(clk)
begin
wishbone_out.ack <= ret_ack and wishbone_in.cyc and wishbone_in.stb;
if rising_edge(clk) then
pipe_ack <= ret_ack;
pipe_dat <= ret_dat;
end if;
end process;
end generate;

pipe_none: if PIPELINE_DEPTH = 0 generate
begin
wishbone_out.ack <= ret_ack;
wishbone_out.dat <= ret_dat;
wishbone_out.stall <= wishbone_in.cyc and not ret_ack;
end generate;
wishbone_process: process(clk)
variable ret_dat_v : wishbone_data_type;
variable adr : std_ulogic_vector(63 downto 0);
begin
if rising_edge(clk) then
if rst = '1' then
state <= IDLE;
ret_ack <= '0';
else
ret_dat := x"FFFFFFFFFFFFFFFF";
ret_dat <= x"FFFFFFFFFFFFFFFF";
ret_ack <= '0';

-- Active
if wishbone_in.cyc = '1' then
case state is
when IDLE =>
if wishbone_in.stb = '1' then
adr := (wishbone_in.adr'left downto 0 => wishbone_in.adr,
others => '0');
-- write
adr := (wishbone_in.adr'left downto 0 => wishbone_in.adr, others => '0');
if wishbone_in.we = '1' then
assert not(is_x(wishbone_in.dat)) and not(is_x(wishbone_in.adr)) severity failure;
report "RAM writing " & to_hstring(wishbone_in.dat) & " to " & to_hstring(wishbone_in.adr);
behavioural_write(wishbone_in.dat, adr, to_integer(unsigned(wishbone_in.sel)), identifier);
reload <= reload + 1;
ret_ack <= '1';
if PIPELINE_DEPTH = 0 then
state <= ACK;
end if;
else
behavioural_read(ret_dat, adr, to_integer(unsigned(wishbone_in.sel)), identifier, reload);
report "RAM reading from " & to_hstring(wishbone_in.adr) & " returns " & to_hstring(ret_dat);
behavioural_read(ret_dat_v, adr, to_integer(unsigned(wishbone_in.sel)), identifier, reload);
report "RAM reading from " & to_hstring(wishbone_in.adr) & " returns " & to_hstring(ret_dat_v);
ret_dat <= ret_dat_v;
ret_ack <= '1';
if PIPELINE_DEPTH = 0 then
state <= ACK;
end if;
end if;
end if;
when ACK =>
ret_ack <= '0';
state <= IDLE;
end case;
else
ret_ack <= '0';
state <= IDLE;
end if;
end if;

Loading…
Cancel
Save