cores
/
microwatt
mirror of https://github.com/antonblanchard/microwatt
3
1
Fork 1
Code Issues Projects Releases Wiki Activity

soc: Re-do peripheral address decode to improve timing

Browse Source 
This generates a series of io_cycle_* signals which are clean latches
and which become the 'cyc' signals of the wishbone buses going to
various peripherals (syscon, uarts, XICS, GPIO, etc.).  Effectively
this is done by moving the address decoding into the slave_io_latch
process.  The slave_io_type, which drives the multiplexer which
selects which wishbone to look for a response on, is reduced to just 8
values in the expectation that an 8-way multiplexer will use less
logic than one with more than 8 inputs.

With this timing is considerably better on the A7-100T.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
pull/348/head
Paul Mackerras 3 years ago
parent 49ec80ac3e
commit 4cf2921b0b
1 changed files with 129 additions and 110 deletions
Show Stats Download Patch File Download Diff File

239
soc.vhdl
Unescape Escape View File

@ -239,12 +239,20 @@ architecture behaviour of soc is
SLAVE_IO_ICP, SLAVE_IO_ICP,
SLAVE_IO_ICS, SLAVE_IO_ICS,
SLAVE_IO_UART1, SLAVE_IO_UART1,
SLAVE_IO_SPI_FLASH_REG, SLAVE_IO_SPI_FLASH,
SLAVE_IO_SPI_FLASH_MAP,
SLAVE_IO_GPIO, SLAVE_IO_GPIO,
SLAVE_IO_EXTERNAL, SLAVE_IO_EXTERNAL);
SLAVE_IO_NONE); signal current_io_decode : slave_io_type;
signal slave_io_dbg : slave_io_type;
signal io_cycle_none : std_ulogic;
signal io_cycle_syscon : std_ulogic;
signal io_cycle_uart : std_ulogic;
signal io_cycle_uart1 : std_ulogic;
signal io_cycle_icp : std_ulogic;
signal io_cycle_ics : std_ulogic;
signal io_cycle_spi_flash : std_ulogic;
signal io_cycle_gpio : std_ulogic;
signal io_cycle_external : std_ulogic;


function wishbone_widen_data(wb : wb_io_master_out) return wishbone_master_out is function wishbone_widen_data(wb : wb_io_master_out) return wishbone_master_out is
variable wwb : wishbone_master_out; variable wwb : wishbone_master_out;
@ -465,14 +473,20 @@ begin
-- Misc -- Misc
variable has_top : boolean; variable has_top : boolean;
variable has_bot : boolean; variable has_bot : boolean;
variable do_cyc : std_ulogic;
variable end_cyc : std_ulogic;
variable slave_io : slave_io_type;
variable match : std_ulogic_vector(31 downto 12);
begin begin
if rising_edge(system_clk) then if rising_edge(system_clk) then
do_cyc := '0';
end_cyc := '0';
if (rst) then if (rst) then
state := IDLE; state := IDLE;
wb_io_out.ack <= '0'; wb_io_out.ack <= '0';
wb_io_out.stall <= '0'; wb_io_out.stall <= '0';
wb_sio_out.cyc <= '0';
wb_sio_out.stb <= '0'; wb_sio_out.stb <= '0';
end_cyc := '1';
has_top := false; has_top := false;
has_bot := false; has_bot := false;
else else
@ -488,7 +502,7 @@ begin
wb_io_out.stall <= '1'; wb_io_out.stall <= '1';


-- Start cycle downstream -- Start cycle downstream
wb_sio_out.cyc <= '1'; do_cyc := '1';
wb_sio_out.stb <= '1'; wb_sio_out.stb <= '1';


-- Copy write enable to IO out, copy address as well -- Copy write enable to IO out, copy address as well
@ -551,8 +565,8 @@ begin
-- Wait for new ack -- Wait for new ack
state := WAIT_ACK_TOP; state := WAIT_ACK_TOP;
else else
-- We are done, ack up, clear cyc downstram -- We are done, ack up, clear cyc downstream
wb_sio_out.cyc <= '0'; end_cyc := '1';


-- And ack & unstall upstream -- And ack & unstall upstream
wb_io_out.ack <= '1'; wb_io_out.ack <= '1';
@ -576,7 +590,7 @@ begin
end if; end if;


-- We are done, ack up, clear cyc downstram -- We are done, ack up, clear cyc downstram
wb_sio_out.cyc <= '0'; end_cyc := '1';


-- And ack & unstall upstream -- And ack & unstall upstream
wb_io_out.ack <= '1'; wb_io_out.ack <= '1';
@ -587,144 +601,149 @@ begin
end if; end if;
end case; end case;
end if; end if;

-- Create individual registered cycle signals for the wishbones
-- going to the various peripherals
if do_cyc = '1' or end_cyc = '1' then
io_cycle_none <= '0';
io_cycle_syscon <= '0';
io_cycle_uart <= '0';
io_cycle_uart1 <= '0';
io_cycle_icp <= '0';
io_cycle_ics <= '0';
io_cycle_spi_flash <= '0';
io_cycle_gpio <= '0';
io_cycle_external <= '0';
wb_sio_out.cyc <= '0';
wb_ext_is_dram_init <= '0';
wb_spiflash_is_map <= '0';
wb_spiflash_is_reg <= '0';
wb_ext_is_dram_csr <= '0';
wb_ext_is_eth <= '0';
wb_ext_is_sdcard <= '0';
end if;
if do_cyc = '1' then
-- Decode I/O address
-- This is real address bits 29 downto 12
match := "11" & wb_io_in.adr(26 downto 9);
slave_io := SLAVE_IO_SYSCON;
if std_match(match, x"FF---") and HAS_DRAM then
slave_io := SLAVE_IO_EXTERNAL;
io_cycle_external <= '1';
wb_ext_is_dram_init <= '1';
elsif std_match(match, x"F----") then
slave_io := SLAVE_IO_SPI_FLASH;
io_cycle_spi_flash <= '1';
wb_spiflash_is_map <= '1';
elsif std_match(match, x"C8---") then
-- Ext IO "chip selects"
if std_match(match, x"--00-") and HAS_DRAM then
slave_io := SLAVE_IO_EXTERNAL;
io_cycle_external <= '1';
wb_ext_is_dram_csr <= '1';
elsif (std_match(match, x"--02-") or std_match(match, x"--03-")) and
HAS_LITEETH then
slave_io := SLAVE_IO_EXTERNAL;
io_cycle_external <= '1';
wb_ext_is_eth <= '1';
elsif std_match(match, x"--04-") and HAS_SD_CARD then
slave_io := SLAVE_IO_EXTERNAL;
io_cycle_external <= '1';
wb_ext_is_sdcard <= '1';
else
io_cycle_none <= '1';
end if;
elsif std_match(match, x"C0000") then
slave_io := SLAVE_IO_SYSCON;
io_cycle_syscon <= '1';
elsif std_match(match, x"C0002") then
slave_io := SLAVE_IO_UART;
io_cycle_uart <= '1';
elsif std_match(match, x"C0003") then
slave_io := SLAVE_IO_UART1;
io_cycle_uart1 <= '1';
elsif std_match(match, x"C0004") then
slave_io := SLAVE_IO_ICP;
io_cycle_icp <= '1';
elsif std_match(match, x"C0005") then
slave_io := SLAVE_IO_ICS;
io_cycle_ics <= '1';
elsif std_match(match, x"C0006") then
slave_io := SLAVE_IO_SPI_FLASH;
io_cycle_spi_flash <= '1';
wb_spiflash_is_reg <= '1';
elsif std_match(match, x"C0007") then
slave_io := SLAVE_IO_GPIO;
io_cycle_gpio <= '1';
else
io_cycle_none <= '1';
end if;
current_io_decode <= slave_io;
wb_sio_out.cyc <= '1';
end if;
end if; end if;
end process; end process;
-- IO wishbone slave intercon. -- IO wishbone slave interconnect.
-- --
slave_io_intercon: process(wb_sio_out, wb_syscon_out, wb_uart0_out, wb_uart1_out, slave_io_intercon: process(all)
wb_ext_io_out, wb_xics_icp_out, wb_xics_ics_out,
wb_spiflash_out)
variable slave_io : slave_io_type;

variable match : std_ulogic_vector(31 downto 12);
variable ext_valid : boolean;
begin begin

-- Simple address decoder.
slave_io := SLAVE_IO_NONE;
match := "11" & wb_sio_out.adr(27 downto 10);
if std_match(match, x"FF---") and HAS_DRAM then
slave_io := SLAVE_IO_EXTERNAL;
elsif std_match(match, x"F----") then
slave_io := SLAVE_IO_SPI_FLASH_MAP;
elsif std_match(match, x"C0000") then
slave_io := SLAVE_IO_SYSCON;
elsif std_match(match, x"C0002") then
slave_io := SLAVE_IO_UART;
elsif std_match(match, x"C0003") then
slave_io := SLAVE_IO_UART1;
elsif std_match(match, x"C8---") then
slave_io := SLAVE_IO_EXTERNAL;
elsif std_match(match, x"C0004") then
slave_io := SLAVE_IO_ICP;
elsif std_match(match, x"C0005") then
slave_io := SLAVE_IO_ICS;
elsif std_match(match, x"C0006") then
slave_io := SLAVE_IO_SPI_FLASH_REG;
elsif std_match(match, x"C0007") then
slave_io := SLAVE_IO_GPIO;
end if;
slave_io_dbg <= slave_io;
wb_uart0_in <= wb_sio_out; wb_uart0_in <= wb_sio_out;
wb_uart0_in.cyc <= '0'; wb_uart0_in.cyc <= io_cycle_uart;
wb_uart1_in <= wb_sio_out; wb_uart1_in <= wb_sio_out;
wb_uart1_in.cyc <= '0'; wb_uart1_in.cyc <= io_cycle_uart1;

wb_spiflash_in <= wb_sio_out; wb_spiflash_in <= wb_sio_out;
wb_spiflash_in.cyc <= '0'; wb_spiflash_in.cyc <= io_cycle_spi_flash;
wb_spiflash_is_reg <= '0'; -- Clear top bits so they don't make their way to the
wb_spiflash_is_map <= '0'; -- flash chip.
wb_spiflash_in.adr(27 downto 26) <= "00";

wb_gpio_in <= wb_sio_out; wb_gpio_in <= wb_sio_out;
wb_gpio_in.cyc <= '0'; wb_gpio_in.cyc <= io_cycle_gpio;


-- Only give xics 8 bits of wb addr (for now...) -- Only give xics 8 bits of wb addr (for now...)
wb_xics_icp_in <= wb_sio_out; wb_xics_icp_in <= wb_sio_out;
wb_xics_icp_in.adr <= (others => '0'); wb_xics_icp_in.adr <= (others => '0');
wb_xics_icp_in.adr(5 downto 0) <= wb_sio_out.adr(5 downto 0); wb_xics_icp_in.adr(5 downto 0) <= wb_sio_out.adr(5 downto 0);
wb_xics_icp_in.cyc <= '0'; wb_xics_icp_in.cyc <= io_cycle_icp;
wb_xics_ics_in <= wb_sio_out; wb_xics_ics_in <= wb_sio_out;
wb_xics_ics_in.adr <= (others => '0'); wb_xics_ics_in.adr <= (others => '0');
wb_xics_ics_in.adr(9 downto 0) <= wb_sio_out.adr(9 downto 0); wb_xics_ics_in.adr(9 downto 0) <= wb_sio_out.adr(9 downto 0);
wb_xics_ics_in.cyc <= '0'; wb_xics_ics_in.cyc <= io_cycle_ics;


wb_ext_io_in <= wb_sio_out; wb_ext_io_in <= wb_sio_out;
wb_ext_io_in.cyc <= '0'; wb_ext_io_in.cyc <= io_cycle_external;


wb_syscon_in <= wb_sio_out; wb_syscon_in <= wb_sio_out;
wb_syscon_in.cyc <= '0'; wb_syscon_in.cyc <= io_cycle_syscon;

wb_ext_is_dram_csr <= '0';
wb_ext_is_dram_init <= '0';
wb_ext_is_eth <= '0';
wb_ext_is_sdcard <= '0';


-- Default response, ack & return all 1's case current_io_decode is
wb_sio_in.dat <= (others => '1');
wb_sio_in.ack <= wb_sio_out.stb and wb_sio_out.cyc;
wb_sio_in.stall <= '0';

case slave_io is
when SLAVE_IO_EXTERNAL => when SLAVE_IO_EXTERNAL =>
-- Ext IO "chip selects" wb_sio_in <= wb_ext_io_out;
--
-- DRAM init is special at 0xFF* so we just test the top
-- bit. Everything else is at 0xC8* so we test only bits
-- 23 downto 16 (21 downto 14 in the wishbone addr).
--
ext_valid := false;
if wb_sio_out.adr(27) = '1' and HAS_DRAM then -- DRAM init is special
wb_ext_is_dram_init <= '1';
ext_valid := true;
elsif wb_sio_out.adr(21 downto 14) = x"00" and HAS_DRAM then
wb_ext_is_dram_csr <= '1';
ext_valid := true;
elsif wb_sio_out.adr(21 downto 14) = x"02" and HAS_LITEETH then
wb_ext_is_eth <= '1';
ext_valid := true;
elsif wb_sio_out.adr(21 downto 14) = x"03" and HAS_LITEETH then
wb_ext_is_eth <= '1';
ext_valid := true;
elsif wb_sio_out.adr(21 downto 14) = x"04" and HAS_SD_CARD then
wb_ext_is_sdcard <= '1';
ext_valid := true;
end if;
if ext_valid then
wb_ext_io_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_ext_io_out;
end if;

when SLAVE_IO_SYSCON => when SLAVE_IO_SYSCON =>
wb_syscon_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_syscon_out; wb_sio_in <= wb_syscon_out;
when SLAVE_IO_UART => when SLAVE_IO_UART =>
wb_uart0_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_uart0_out; wb_sio_in <= wb_uart0_out;
when SLAVE_IO_ICP => when SLAVE_IO_ICP =>
wb_xics_icp_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_xics_icp_out; wb_sio_in <= wb_xics_icp_out;
when SLAVE_IO_ICS => when SLAVE_IO_ICS =>
wb_xics_ics_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_xics_ics_out; wb_sio_in <= wb_xics_ics_out;
when SLAVE_IO_UART1 => when SLAVE_IO_UART1 =>
wb_uart1_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_uart1_out; wb_sio_in <= wb_uart1_out;
when SLAVE_IO_SPI_FLASH_MAP => when SLAVE_IO_SPI_FLASH =>
-- Clear top bits so they don't make their way to the
-- fash chip.
wb_spiflash_in.adr(27 downto 26) <= "00";
wb_spiflash_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_spiflash_out; wb_sio_in <= wb_spiflash_out;
wb_spiflash_is_map <= '1';
when SLAVE_IO_SPI_FLASH_REG =>
wb_spiflash_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_spiflash_out;
wb_spiflash_is_reg <= '1';
when SLAVE_IO_GPIO => when SLAVE_IO_GPIO =>
wb_gpio_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_gpio_out; wb_sio_in <= wb_gpio_out;
when others =>
end case; end case;


-- Default response, ack & return all 1's
if io_cycle_none = '1' then
wb_sio_in.dat <= (others => '1');
wb_sio_in.ack <= wb_sio_out.stb and wb_sio_out.cyc;
wb_sio_in.stall <= '0';
end if;

end process; end process;


-- Syscon slave -- Syscon slave

Write Preview
Loading…
Cancel
Save