Add arrays for ASIC flow

Add VHDL wrappers and verilog behaviourals for the cache_ram,
register_file and main_bram arrays.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
caravel-mpw5-20220322
Anton Blanchard 4 years ago committed by Anton Blanchard
parent 747c96b100
commit 8ecb30da05

@ -0,0 +1,24 @@
module Microwatt_FP_DFFRFile (
`ifdef USE_POWER_PINS
inout VPWR,
inout VGND,
`endif
input [6:0] R1, R2, R3, RW,
input [63:0] DW,
output [63:0] D1, D2, D3,
input CLK,
input WE
);

reg [63:0] registers[0:95];

assign D1 = registers[R1];
assign D2 = registers[R2];
assign D3 = registers[R3];

always @(posedge CLK) begin
if (WE)
registers[RW] <= DW;
end

endmodule

@ -0,0 +1,40 @@
module RAM32_1RW1R #(
parameter BITS=5
) (
`ifdef USE_POWER_PINS
inout VPWR,
inout VGND,
`endif
input CLK,

input EN0,
input [BITS-1:0] A0,
input [7:0] WE0,
input [63:0] Di0,
output reg [63:0] Do0,

input EN1,
input [BITS-1:0] A1,
output reg [63:0] Do1
);

reg [63:0] RAM[2**BITS-1:0];

always @(posedge CLK) begin
if (EN1)
Do1 <= RAM[A1];
end

generate
genvar i;
for (i=0; i<8; i=i+1) begin: BYTE
always @(posedge CLK) begin
if (EN0) begin
if (WE0[i])
RAM[A0][i*8+7:i*8] <= Di0[i*8+7:i*8];
end
end
end
endgenerate

endmodule

@ -0,0 +1,42 @@
module RAM512 #(
parameter BITS=9,
parameter FILENAME="firmware.hex"
) (
`ifdef USE_POWER_PINS
inout VPWR,
inout VGND,
`endif
input CLK,
input [7:0] WE0,
input EN0,
input [63:0] Di0,
output reg [63:0] Do0,
input [BITS-1:0] A0
);

reg [63:0] RAM[2**BITS-1:0];

always @(posedge CLK) begin
if (EN0)
Do0 <= RAM[A0];
else
Do0 <= 64'b0;
end

generate
genvar i;
for (i=0; i<8; i=i+1) begin: BYTE
always @(posedge CLK) begin
if (EN0) begin
if (WE0[i])
RAM[A0][i*8+7:i*8] <= Di0[i*8+7:i*8];
end
end
end
endgenerate

initial begin
$readmemh(FILENAME, RAM);
end

endmodule

@ -0,0 +1,24 @@
module multiply_add_64x64
#(
parameter BITS=64
) (
`ifdef USE_POWER_PINS
inout VPWR,
inout VGND,
`endif
input clk,
input [BITS-1:0] a,
input [BITS-1:0] b,
input [BITS*2-1:0] c,
output [BITS*2-1:0] o
);
reg [BITS*2-1:0] o_tmp[2:0];

always @(posedge clk) begin
o_tmp[2] = o_tmp[1];
o_tmp[1] = o_tmp[0];
o_tmp[0] = (a * b) + c;
end

assign o = o_tmp[2];
endmodule

@ -0,0 +1,99 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.math_real.all;

entity cache_ram is
generic(
ROW_BITS : integer := 5;
WIDTH : integer := 64;
TRACE : boolean := false;
ADD_BUF : boolean := false
);

port(
clk : in std_logic;

rd_en : in std_logic;
rd_addr : in std_logic_vector(ROW_BITS - 1 downto 0);
rd_data : out std_logic_vector(WIDTH - 1 downto 0);

wr_sel : in std_logic_vector(WIDTH/8 - 1 downto 0);
wr_addr : in std_logic_vector(ROW_BITS - 1 downto 0);
wr_data : in std_logic_vector(WIDTH - 1 downto 0)
);

end cache_ram;

architecture rtl of cache_ram is
component RAM32_1RW1R port(
CLK : in std_logic;

EN0 : in std_logic;
A0 : in std_logic_vector(4 downto 0);
WE0 : in std_logic_vector(7 downto 0);
Di0 : in std_logic_vector(63 downto 0);
Do0 : out std_logic_vector(63 downto 0);

EN1 : in std_logic;
A1 : in std_logic_vector(4 downto 0);
Do1 : out std_logic_vector(63 downto 0)
);
end component;

signal wr_enable: std_logic;
signal rd_data0_tmp : std_logic_vector(WIDTH - 1 downto 0);
signal rd_data0_saved : std_logic_vector(WIDTH - 1 downto 0);
signal rd_data0 : std_logic_vector(WIDTH - 1 downto 0);
signal rd_en_prev: std_ulogic;
begin
assert (ROW_BITS = 5) report "ROW_BITS must be 5" severity FAILURE;
assert (WIDTH = 64) report "Must be 64 bit" severity FAILURE;
assert (TRACE = false) report "Trace not supported" severity FAILURE;

wr_enable <= or(wr_sel);

cache_ram_0 : RAM32_1RW1R
port map (
CLK => clk,

EN0 => wr_enable,
A0 => wr_addr,
WE0 => wr_sel,
Di0 => wr_data,
Do0 => open,

EN1 => rd_en,
A1 => rd_addr,
Do1 => rd_data0_tmp
);

-- The caches rely on cache_ram latching the last read. Handle it here
-- for now.
process(clk)
begin
if rising_edge(clk) then
rd_en_prev <= rd_en;
if rd_en_prev = '1' then
rd_data0_saved <= rd_data0_tmp;
end if;
end if;
end process;
rd_data0 <= rd_data0_tmp when rd_en_prev = '1' else rd_data0_saved;

buf: if ADD_BUF generate
begin
process(clk)
begin
if rising_edge(clk) then
rd_data <= rd_data0;
end if;
end process;
end generate;

nobuf: if not ADD_BUF generate
begin
rd_data <= rd_data0;
end generate;

end architecture rtl;

@ -0,0 +1,63 @@
library ieee;
use ieee.std_logic_1164.all;

library work;

entity main_bram is
generic(
WIDTH : natural := 64;
HEIGHT_BITS : natural;
MEMORY_SIZE : natural;
RAM_INIT_FILE : string
);
port(
clk : in std_logic;
addr : in std_logic_vector(HEIGHT_BITS - 1 downto 0) ;
din : in std_logic_vector(WIDTH-1 downto 0);
dout : out std_logic_vector(WIDTH-1 downto 0);
sel : in std_logic_vector((WIDTH/8)-1 downto 0);
re : in std_ulogic;
we : in std_ulogic
);
end entity main_bram;

architecture behaviour of main_bram is
component RAM512 port (
CLK : in std_ulogic;
WE0 : in std_ulogic_vector(7 downto 0);
EN0 : in std_ulogic;
Di0 : in std_ulogic_vector(63 downto 0);
Do0 : out std_ulogic_vector(63 downto 0);
A0 : in std_ulogic_vector(8 downto 0)
);
end component;

signal sel_qual: std_ulogic_vector((WIDTH/8)-1 downto 0);

signal obuf : std_logic_vector(WIDTH-1 downto 0);
begin
assert (WIDTH = 64) report "Must be 64 bit" severity FAILURE;
-- Do we have a log2 round up issue here?
assert (HEIGHT_BITS = 9) report "HEIGHT_BITS must be 10" severity FAILURE;
assert (MEMORY_SIZE = 4096) report "MEMORY_SIZE must be 4096" severity FAILURE;

sel_qual <= sel when we = '1' else (others => '0');

memory_0 : RAM512
port map (
CLK => clk,
WE0 => sel_qual(7 downto 0),
EN0 => re or we,
Di0 => din(63 downto 0),
Do0 => obuf(63 downto 0),
A0 => addr(8 downto 0)
);

-- The wishbone BRAM wrapper assumes a 1 cycle delay
memory_read_buffer: process(clk)
begin
if rising_edge(clk) then
dout <= obuf;
end if;
end process;
end architecture behaviour;

@ -0,0 +1,128 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

library work;
use work.common.all;

-- XXX We should be able to make timing with a 2 cycle multiplier
entity multiply is
generic (
PIPELINE_DEPTH : natural := 4
);
port (
clk : in std_logic;

m_in : in MultiplyInputType;
m_out : out MultiplyOutputType
);
end entity multiply;

architecture behaviour of multiply is
signal m: MultiplyInputType := MultiplyInputInit;

type multiply_pipeline_stage is record
valid : std_ulogic;
is_32bit : std_ulogic;
not_res : std_ulogic;
end record;
constant MultiplyPipelineStageInit : multiply_pipeline_stage := (valid => '0',
is_32bit => '0',
not_res => '0');

type multiply_pipeline_type is array(0 to PIPELINE_DEPTH-1) of multiply_pipeline_stage;
constant MultiplyPipelineInit : multiply_pipeline_type := (others => MultiplyPipelineStageInit);

type reg_type is record
multiply_pipeline : multiply_pipeline_type;
end record;

signal r, rin : reg_type := (multiply_pipeline => MultiplyPipelineInit);
signal overflow : std_ulogic;
signal ovf_in : std_ulogic;

signal mult_out : std_logic_vector(127 downto 0);

component multiply_add_64x64 port(
clk : in std_logic;
a : in std_logic_vector(63 downto 0);
b : in std_logic_vector(63 downto 0);
c : in std_logic_vector(127 downto 0);
o : out std_logic_vector(127 downto 0)
);
end component;
begin
multiply_0: process(clk)
begin
if rising_edge(clk) then
m <= m_in;
r <= rin;
overflow <= ovf_in;
end if;
end process;

multiplier : multiply_add_64x64
port map (
clk => clk,
a => m.data1,
b => m.data2,
c => m.addend,
o => mult_out
);

multiply_1: process(all)
variable v : reg_type;
variable d : std_ulogic_vector(127 downto 0);
variable d2 : std_ulogic_vector(63 downto 0);
variable ov : std_ulogic;
begin
v := r;
v.multiply_pipeline(0).valid := m.valid;
v.multiply_pipeline(0).is_32bit := m.is_32bit;
v.multiply_pipeline(0).not_res := m.not_result;

loop_0: for i in 1 to PIPELINE_DEPTH-1 loop
v.multiply_pipeline(i) := r.multiply_pipeline(i-1);
end loop;

if v.multiply_pipeline(PIPELINE_DEPTH-1).not_res = '1' then
d := not mult_out;
else
d := mult_out;
end if;

ov := '0';
if v.multiply_pipeline(PIPELINE_DEPTH-1).is_32bit = '1' then
ov := (or d(63 downto 31)) and not (and d(63 downto 31));
else
ov := (or d(127 downto 63)) and not (and d(127 downto 63));
end if;
ovf_in <= ov;

m_out.result <= d;
m_out.overflow <= overflow;
m_out.valid <= v.multiply_pipeline(PIPELINE_DEPTH-1).valid;

rin <= v;
end process;
end architecture behaviour;


library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

entity short_multiply is
port (
clk : in std_ulogic;

a_in : in std_ulogic_vector(15 downto 0);
b_in : in std_ulogic_vector(15 downto 0);
m_out : out std_ulogic_vector(31 downto 0)
);
end entity short_multiply;

architecture behaviour of short_multiply is
begin
m_out <= std_ulogic_vector(signed(a_in) * signed(b_in));
end architecture behaviour;

@ -0,0 +1,103 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

library work;
use work.common.all;

entity register_file is
generic (
SIM : boolean := false;
HAS_FPU : boolean := true;
LOG_LENGTH : natural := 0
);
port(
clk : in std_logic;

d_in : in Decode2ToRegisterFileType;
d_out : out RegisterFileToDecode2Type;

w_in : in WritebackToRegisterFileType;

dbg_gpr_req : in std_ulogic;
dbg_gpr_ack : out std_ulogic;
dbg_gpr_addr : in gspr_index_t;
dbg_gpr_data : out std_ulogic_vector(63 downto 0);

sim_dump : in std_ulogic;
sim_dump_done : out std_ulogic;

log_out : out std_ulogic_vector(71 downto 0)
);
end entity register_file;

architecture behaviour of register_file is
component Microwatt_FP_DFFRFile port (
CLK : in std_ulogic;

R1 : in std_ulogic_vector(6 downto 0);
R2 : in std_ulogic_vector(6 downto 0);
R3 : in std_ulogic_vector(6 downto 0);

D1 : out std_ulogic_vector(63 downto 0);
D2 : out std_ulogic_vector(63 downto 0);
D3 : out std_ulogic_vector(63 downto 0);

WE : in std_ulogic;
RW : in std_ulogic_vector(6 downto 0);
DW : in std_ulogic_vector(63 downto 0)
);
end component;

signal d1: std_ulogic_vector(63 downto 0);
signal d2: std_ulogic_vector(63 downto 0);
signal d3: std_ulogic_vector(63 downto 0);
begin

register_file_0 : Microwatt_FP_DFFRFile
port map (
CLK => clk,

R1 => d_in.read1_reg,
R2 => d_in.read2_reg,
R3 => d_in.read3_reg,

D1 => d1,
D2 => d2,
D3 => d3,

WE => w_in.write_enable,
RW => w_in.write_reg,
DW => w_in.write_data
);

x_state_check: process(clk)
begin
if rising_edge(clk) then
if w_in.write_enable = '1' then
assert not(is_x(w_in.write_data)) and not(is_x(w_in.write_reg)) severity failure;
end if;
end if;
end process x_state_check;

-- Forward any written data
register_read_0: process(all)
begin
d_out.read1_data <= d1;
d_out.read2_data <= d2;
d_out.read3_data <= d3;

if w_in.write_enable = '1' then
if d_in.read1_reg = w_in.write_reg then
d_out.read1_data <= w_in.write_data;
end if;
if d_in.read2_reg = w_in.write_reg then
d_out.read2_data <= w_in.write_data;
end if;
if d_in.read3_reg = w_in.write_reg then
d_out.read3_data <= w_in.write_data;
end if;
end if;
end process register_read_0;

end architecture behaviour;
Loading…
Cancel
Save