litedram: Update yaml files

Update the litedram yaml files based on latest upstream.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
pull/307/head
Anton Blanchard 3 years ago committed by Anton Blanchard
parent 6034a9e31f
commit ac546a3024

@ -3,13 +3,11 @@


{ {
# General ------------------------------------------------------------------ # General ------------------------------------------------------------------
"cpu": "None", # Type of CPU used for init/calib (vexriscv, lm32) "cpu": "None", # CPU type (ex vexriscv, serv, None)
"cpu_variant":"standard",
"speedgrade": -2, # FPGA speedgrade "speedgrade": -2, # FPGA speedgrade
"memtype": "DDR3", # DRAM type "memtype": "DDR3", # DRAM type


# PHY ---------------------------------------------------------------------- # PHY ----------------------------------------------------------------------
"cmd_delay": 0, # Command additional delay (in taps)
"cmd_latency": 0, # Command additional latency "cmd_latency": 0, # Command additional latency
"sdram_module": "MT41K512M16", # SDRAM modules of the board or SO-DIMM "sdram_module": "MT41K512M16", # SDRAM modules of the board or SO-DIMM
"sdram_module_nb": 2, # Number of byte groups "sdram_module_nb": 2, # Number of byte groups
@ -35,8 +33,4 @@
"type": "native", "type": "native",
}, },
}, },

# CSR Port -----------------------------------------------------------------
"csr_alignment" : 32,
"csr_data_width" : 32,
} }

@ -3,13 +3,11 @@


{ {
# General ------------------------------------------------------------------ # General ------------------------------------------------------------------
"cpu": "None", # Type of CPU used for init/calib (vexriscv, lm32) "cpu": "None", # CPU type (ex vexriscv, serv, None)
"cpu_variant":"standard",
"speedgrade": -1, # FPGA speedgrade "speedgrade": -1, # FPGA speedgrade
"memtype": "DDR3", # DRAM type "memtype": "DDR3", # DRAM type


# PHY ---------------------------------------------------------------------- # PHY ----------------------------------------------------------------------
"cmd_delay": 0, # Command additional delay (in taps)
"cmd_latency": 0, # Command additional latency "cmd_latency": 0, # Command additional latency
"sdram_module": "MT41K128M16", # SDRAM modules of the board or SO-DIMM "sdram_module": "MT41K128M16", # SDRAM modules of the board or SO-DIMM
"sdram_module_nb": 2, # Number of byte groups "sdram_module_nb": 2, # Number of byte groups
@ -35,8 +33,4 @@
"type": "native", "type": "native",
}, },
}, },

# CSR Port -----------------------------------------------------------------
"csr_alignment" : 32,
"csr_data_width" : 32,
} }

@ -3,8 +3,7 @@


{ {
# General ------------------------------------------------------------------ # General ------------------------------------------------------------------
"cpu": "None", # Type of CPU used for init/calib (vexriscv, lm32) "cpu": "None", # CPU type (ex vexriscv, serv, None)
"cpu_variant":"standard",
"speedgrade": -2, # FPGA speedgrade "speedgrade": -2, # FPGA speedgrade
"memtype": "DDR3", # DRAM type "memtype": "DDR3", # DRAM type


@ -13,12 +12,12 @@
"sdram_module": "MT41J256M16", # SDRAM modules of the board or SO-DIMM "sdram_module": "MT41J256M16", # SDRAM modules of the board or SO-DIMM
"sdram_module_nb": 4, # Number of byte groups "sdram_module_nb": 4, # Number of byte groups
"sdram_rank_nb": 1, # Number of ranks "sdram_rank_nb": 1, # Number of ranks
"sdram_phy": K7DDRPHY, # Type of FPGA PHY "sdram_phy": "K7DDRPHY", # Type of FPGA PHY


# Electrical --------------------------------------------------------------- # Electrical ---------------------------------------------------------------
"rtt_nom": "60ohm", # Nominal termination "rtt_nom": "60ohm", # Nominal termination
"rtt_wr": "60ohm", # Write termination "rtt_wr": "60ohm", # Write termination
"ron": "34ohm", # Output driver impedance "ron": "34ohm", # Output driver impedance


# Frequency ---------------------------------------------------------------- # Frequency ----------------------------------------------------------------
"input_clk_freq": 200e6, # Input clock frequency "input_clk_freq": 200e6, # Input clock frequency
@ -34,8 +33,4 @@
"type": "native", "type": "native",
}, },
}, },

# CSR Port -----------------------------------------------------------------
"csr_alignment" : 32,
"csr_data_width" : 32,
} }

@ -3,13 +3,11 @@


{ {
# General ------------------------------------------------------------------ # General ------------------------------------------------------------------
"cpu": "None", # Type of CPU used for init/calib (vexriscv, lm32) "cpu": "None", # CPU type (ex vexriscv, serv, None)
"cpu_variant":"standard",
"speedgrade": -1, # FPGA speedgrade "speedgrade": -1, # FPGA speedgrade
"memtype": "DDR3", # DRAM type "memtype": "DDR3", # DRAM type


# PHY ---------------------------------------------------------------------- # PHY ----------------------------------------------------------------------
"cmd_delay": 0, # Command additional delay (in taps)
"cmd_latency": 0, # Command additional latency "cmd_latency": 0, # Command additional latency
"sdram_module": "MT41K256M16", # SDRAM modules of the board or SO-DIMM "sdram_module": "MT41K256M16", # SDRAM modules of the board or SO-DIMM
"sdram_module_nb": 2, # Number of byte groups "sdram_module_nb": 2, # Number of byte groups
@ -35,8 +33,4 @@
"type": "native", "type": "native",
}, },
}, },

# CSR Port -----------------------------------------------------------------
"csr_alignment" : 32,
"csr_data_width" : 32,
} }

@ -3,14 +3,11 @@


{ {
# General ------------------------------------------------------------------ # General ------------------------------------------------------------------
"cpu": "None", # Type of CPU used for init/calib (vexriscv, lm32) "cpu": "None", # CPU type (ex vexriscv, serv, None)
"cpu_variant":"standard",
"speedgrade": -1, # FPGA speedgrade "speedgrade": -1, # FPGA speedgrade
"memtype": "DDR3", # DRAM type "memtype": "DDR3", # DRAM type
"sim" : "True",


# PHY ---------------------------------------------------------------------- # PHY ----------------------------------------------------------------------
"cmd_delay": 0, # Command additional delay (in taps)
"cmd_latency": 0, # Command additional latency "cmd_latency": 0, # Command additional latency
"sdram_module": "MT41K128M16", # SDRAM modules of the board or SO-DIMM "sdram_module": "MT41K128M16", # SDRAM modules of the board or SO-DIMM
"sdram_module_nb": 2, # Number of byte groups "sdram_module_nb": 2, # Number of byte groups
@ -36,8 +33,4 @@
"type": "native", "type": "native",
}, },
}, },

# CSR Port -----------------------------------------------------------------
"csr_alignment" : 32,
"csr_data_width" : 32,
} }

Loading…
Cancel
Save