execute1: Implement trace interrupts

Trace interrupts occur when the MSR[TE] field is non-zero and an
instruction other than rfid has been successfully completed.  A trace
interrupt occurs before the next instruction is executed or any
asynchronous interrupt is taken.

Since the trace interrupt is defined to set SRR1 bits depending on
whether the traced instruction is a load or an instruction treated as
a load, or a store or an instruction treated as a store, we need to
make sure the treated-as-a-load instructions (icbi, icbt, dcbt, dcbst,
dcbf) and the treated-as-a-store instructions (dcbtst, dcbz) have the
correct opcodes in decode1.  Several of them were previously marked as
OP_NOP.

We don't yet implement the SIAR or SDAR registers, which should be set
by trace interrupts.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
pull/244/head
Paul Mackerras 4 years ago
parent 6a80825e70
commit b589d2d472

@ -13,6 +13,8 @@ package common is
constant MSR_SF : integer := (63 - 0); -- Sixty-Four bit mode
constant MSR_EE : integer := (63 - 48); -- External interrupt Enable
constant MSR_PR : integer := (63 - 49); -- PRoblem state
constant MSR_SE : integer := (63 - 53); -- Single-step bit of TE field
constant MSR_BE : integer := (63 - 54); -- Branch trace bit of TE field
constant MSR_IR : integer := (63 - 58); -- Instruction Relocation
constant MSR_DR : integer := (63 - 59); -- Data Relocation
constant MSR_RI : integer := (63 - 62); -- Recoverable Interrupt

@ -201,10 +201,10 @@ architecture behaviour of decode1 is
2#1000111010# => (ALU, OP_CNTZ, NONE, NONE, RS, RA, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- cnttzd
2#1000011010# => (ALU, OP_CNTZ, NONE, NONE, RS, RA, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '1', '0', RC, '0', '0'), -- cnttzw
2#1011110011# => (ALU, OP_DARN, NONE, NONE, NONE, RT, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '0'), -- darn
2#0001010110# => (ALU, OP_NOP, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- dcbf
2#0000110110# => (ALU, OP_NOP, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- dcbst
2#0100010110# => (ALU, OP_NOP, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- dcbt
2#0011110110# => (ALU, OP_NOP, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- dcbtst
2#0001010110# => (ALU, OP_DCBF, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- dcbf
2#0000110110# => (ALU, OP_DCBST, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- dcbst
2#0100010110# => (ALU, OP_DCBT, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- dcbt
2#0011110110# => (ALU, OP_DCBTST, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- dcbtst
2#1111110110# => (LDST, OP_DCBZ, RA_OR_ZERO, RB, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '0'), -- dcbz
2#0110001001# => (ALU, OP_DIVE, RA, RB, NONE, RT, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- divdeu
2#1110001001# => (ALU, OP_DIVE, RA, RB, NONE, RT, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- divdeuo
@ -230,7 +230,7 @@ architecture behaviour of decode1 is
2#1101111010# => (ALU, OP_EXTSWSLI, NONE, CONST_SH, RS, RA, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- extswsli
2#1101111011# => (ALU, OP_EXTSWSLI, NONE, CONST_SH, RS, RA, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- extswsli
2#1111010110# => (ALU, OP_ICBI, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- icbi
2#0000010110# => (ALU, OP_NOP, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- icbt
2#0000010110# => (ALU, OP_ICBT, NONE, NONE, NONE, NONE, '0', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- icbt
2#0000001111# => (ALU, OP_ISEL, RA_OR_ZERO, RB, NONE, RT, '1', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'), -- isel
2#0000101111# => (ALU, OP_ISEL, RA_OR_ZERO, RB, NONE, RT, '1', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '0'), -- isel
2#0001001111# => (ALU, OP_ISEL, RA_OR_ZERO, RB, NONE, RT, '1', '0', '0', '0', ZERO, '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '0'), -- isel

@ -53,6 +53,8 @@ architecture behaviour of execute1 is
f : Execute1ToFetch1Type;
busy: std_ulogic;
terminate: std_ulogic;
trace_next : std_ulogic;
prev_op : insn_type_t;
lr_update : std_ulogic;
next_lr : std_ulogic_vector(63 downto 0);
mul_in_progress : std_ulogic;
@ -69,7 +71,7 @@ architecture behaviour of execute1 is
end record;
constant reg_type_init : reg_type :=
(e => Execute1ToWritebackInit, f => Execute1ToFetch1Init,
busy => '0', lr_update => '0', terminate => '0',
busy => '0', lr_update => '0', terminate => '0', trace_next => '0', prev_op => OP_ILLEGAL,
mul_in_progress => '0', mul_finish => '0', div_in_progress => '0', cntz_in_progress => '0',
slow_op_insn => OP_ILLEGAL, slow_op_rc => '0', slow_op_oe => '0', slow_op_xerc => xerc_init,
next_lr => (others => '0'), last_nia => (others => '0'), others => (others => '0'));
@ -330,6 +332,7 @@ begin
variable abs_branch : std_ulogic;
variable spr_val : std_ulogic_vector(63 downto 0);
variable addend : std_ulogic_vector(127 downto 0);
variable do_trace : std_ulogic;
begin
result := (others => '0');
sum_with_carry := (others => '0');
@ -525,6 +528,11 @@ begin

v.e.mode_32bit := not ctrl.msr(MSR_SF);

do_trace := valid_in and ctrl.msr(MSR_SE);
if valid_in = '1' then
v.prev_op := e_in.insn_type;
end if;

if ctrl.irq_state = WRITE_SRR1 then
v.e.exc_write_reg := fast_spr_num(SPR_SRR1);
v.e.exc_write_data := ctrl.srr1;
@ -532,13 +540,29 @@ begin
ctrl_tmp.msr(MSR_SF) <= '1';
ctrl_tmp.msr(MSR_EE) <= '0';
ctrl_tmp.msr(MSR_PR) <= '0';
ctrl_tmp.msr(MSR_SE) <= '0';
ctrl_tmp.msr(MSR_BE) <= '0';
ctrl_tmp.msr(MSR_IR) <= '0';
ctrl_tmp.msr(MSR_DR) <= '0';
ctrl_tmp.msr(MSR_RI) <= '0';
ctrl_tmp.msr(MSR_LE) <= '1';
v.e.valid := '1';
v.trace_next := '0';
report "Writing SRR1: " & to_hstring(ctrl.srr1);

elsif r.trace_next = '1' and valid_in = '1' then
-- Generate a trace interrupt rather than executing the next instruction
-- or taking any asynchronous interrupt
v.f.redirect_nia := std_logic_vector(to_unsigned(16#d00#, 64));
ctrl_tmp.srr1(63 - 33) <= '1';
if r.prev_op = OP_LOAD or r.prev_op = OP_ICBI or r.prev_op = OP_ICBT or
r.prev_op = OP_DCBT or r.prev_op = OP_DCBST or r.prev_op = OP_DCBF then
ctrl_tmp.srr1(63 - 35) <= '1';
elsif r.prev_op = OP_STORE or r.prev_op = OP_DCBZ or r.prev_op = OP_DCBTST then
ctrl_tmp.srr1(63 - 36) <= '1';
end if;
exception := '1';

elsif irq_valid = '1' and valid_in = '1' then
-- we need two cycles to write srr0 and 1
-- will need more when we have to write HEIR
@ -594,7 +618,7 @@ begin
else
illegal := '1';
end if;
when OP_NOP =>
when OP_NOP | OP_DCBF | OP_DCBST | OP_DCBT | OP_DCBTST | OP_ICBT =>
-- Do nothing
when OP_ADD | OP_CMP | OP_TRAP =>
result := sum_with_carry(63 downto 0);
@ -715,6 +739,9 @@ begin
is_branch := '1';
taken_branch := '1';
abs_branch := insn_aa(e_in.insn);
if ctrl.msr(MSR_BE) = '1' then
do_trace := '1';
end if;
when OP_BC =>
-- read_data1 is CTR
bo := insn_bo(e_in.insn);
@ -727,6 +754,9 @@ begin
is_branch := '1';
taken_branch := ppc_bc_taken(bo, bi, cr_in, a_in);
abs_branch := insn_aa(e_in.insn);
if ctrl.msr(MSR_BE) = '1' then
do_trace := '1';
end if;
when OP_BCREG =>
-- read_data1 is CTR
-- read_data2 is target register (CTR, LR or TAR)
@ -740,6 +770,9 @@ begin
is_branch := '1';
taken_branch := ppc_bc_taken(bo, bi, cr_in, a_in);
abs_branch := '1';
if ctrl.msr(MSR_BE) = '1' then
do_trace := '1';
end if;

when OP_RFID =>
v.f.virt_mode := a_in(MSR_IR) or a_in(MSR_PR);
@ -760,6 +793,7 @@ begin
is_branch := '1';
taken_branch := '1';
abs_branch := '1';
do_trace := '0';

when OP_CNTZ =>
v.e.valid := '0';
@ -1135,6 +1169,10 @@ begin
end if;
end if;

if do_trace = '1' then
v.trace_next := '1';
end if;

v.e.write_data := result;
v.e.write_enable := result_en and not exception;


Loading…
Cancel
Save