Merge pull request #223 from mikey/ecp5

Make ECP5 devices work and add github artifacts

.github/workflows/test.yml

@@ -47,12 +47,26 @@ jobs:
     - uses: actions/checkout@v2
     - run: docker run -t -v $PWD:/build -w /build ghdl/vunit:llvm bash -c "make -j$(nproc) ${{ matrix.task }}"
 
-  symbiflow-ecp5:
+  symbiflow:
+    strategy:
+      fail-fast: false
+      max-parallel: 2
+      matrix:
+        task: [ ECP5-EVN, ORANGE-CRAB ]
     runs-on: ubuntu-latest
+    env:
+      DOCKER: 1
+      SYNTH_ECP5_FLAGS: -noflatten
+      FPGA_TARGET: ${{matrix.task}}
     steps:
     - uses: actions/checkout@v2
-    - run: make DOCKER=1 FPGA_TARGET=ECP5-EVN SYNTH_ECP5_FLAGS="-noflatten" microwatt.json
+    - run: make microwatt.json
-    - run: make DOCKER=1 FPGA_TARGET=ECP5-EVN microwatt.bit
+    - run: make microwatt.bit
+    - run: make microwatt.svf
+    - uses: actions/upload-artifact@v2
+      with:
+        name: ${{matrix.task}}-bitstream
+        path: microwatt.svf
 
 # test building verilog target from yosys/nextpnr
   verilog:
@@ -60,3 +74,5 @@ jobs:
     steps:
     - uses: actions/checkout@v2
     - run: make DOCKER=1 microwatt.v
+
+

Makefile

@@ -149,10 +149,10 @@ FPGA_TARGET ?= ORANGE-CRAB
 ifeq ($(FPGA_TARGET), ORANGE-CRAB)
 RESET_LOW=true
 CLK_INPUT=50000000
-CLK_FREQUENCY=50000000
+CLK_FREQUENCY=40000000
 LPF=constraints/orange-crab.lpf
 PACKAGE=CSFBGA285
-NEXTPNR_FLAGS=--um5g-85k --freq 50
+NEXTPNR_FLAGS=--um5g-85k --freq 40
 OPENOCD_JTAG_CONFIG=openocd/olimex-arm-usb-tiny-h.cfg
 OPENOCD_DEVICE_CONFIG=openocd/LFE5UM5G-85F.cfg
 endif
@@ -161,10 +161,10 @@ endif
 ifeq ($(FPGA_TARGET), ECP5-EVN)
 RESET_LOW=true
 CLK_INPUT=12000000
-CLK_FREQUENCY=12000000
+CLK_FREQUENCY=40000000
 LPF=constraints/ecp5-evn.lpf
 PACKAGE=CABGA381
-NEXTPNR_FLAGS=--um5g-85k --freq 12
+NEXTPNR_FLAGS=--um5g-85k --freq 40
 OPENOCD_JTAG_CONFIG=openocd/ecp5-evn.cfg
 OPENOCD_DEVICE_CONFIG=openocd/LFE5UM5G-85F.cfg
 endif
@@ -172,7 +172,7 @@ endif
 GHDL_IMAGE_GENERICS=-gMEMORY_SIZE=$(MEMORY_SIZE) -gRAM_INIT_FILE=$(RAM_INIT_FILE) \
 	-gRESET_LOW=$(RESET_LOW) -gCLK_INPUT=$(CLK_INPUT) -gCLK_FREQUENCY=$(CLK_FREQUENCY)
 
-clkgen=fpga/clk_gen_bypass.vhd
+clkgen=fpga/clk_gen_ecp5.vhd
 toplevel=fpga/top-generic.vhdl
 dmi_dtm=dmi_dtm_dummy.vhdl
 

fpga/clk_gen_ecp5.vhd

@@ -0,0 +1,127 @@
+library ieee;
+use ieee.std_logic_1164.all;
+
+entity clock_generator is
+    generic (
+        CLK_INPUT_HZ  : positive := 12000000;
+        CLK_OUTPUT_HZ : positive := 50000000
+        );
+
+    port (
+	ext_clk        : in  std_logic;
+	pll_rst_in   : in  std_logic;
+	pll_clk_out : out std_logic;
+	pll_locked_out : out std_logic
+	);
+
+end entity clock_generator;
+
+architecture bypass of clock_generator is
+
+    -- prototype of ECP5 PLL
+    component EHXPLLL is
+	generic (
+	    CLKI_DIV : integer := 1;
+	    CLKFB_DIV : integer := 1;
+	    CLKOP_DIV : integer := 8;
+	    CLKOS_DIV : integer := 8;
+	    CLKOS2_DIV : integer := 8;
+	    CLKOS3_DIV : integer := 8;
+	    CLKOP_ENABLE : string := "ENABLED";
+	    CLKOS_ENABLE : string := "DISABLED";
+	    CLKOS2_ENABLE : string := "DISABLED";
+	    CLKOS3_ENABLE : string := "DISABLED";
+	    CLKOP_CPHASE : integer := 0;
+	    CLKOS_CPHASE : integer := 0;
+	    CLKOS2_CPHASE : integer := 0;
+	    CLKOS3_CPHASE : integer := 0;
+	    CLKOP_FPHASE : integer := 0;
+	    CLKOS_FPHASE : integer := 0;
+	    CLKOS2_FPHASE : integer := 0;
+	    CLKOS3_FPHASE : integer := 0;
+	    FEEDBK_PATH : string := "CLKOP";
+	    CLKOP_TRIM_POL : string := "RISING";
+	    CLKOP_TRIM_DELAY : integer := 0;
+	    CLKOS_TRIM_POL : string := "RISING";
+	    CLKOS_TRIM_DELAY : integer := 0;
+	    OUTDIVIDER_MUXA : string := "DIVA";
+	    OUTDIVIDER_MUXB : string := "DIVB";
+	    OUTDIVIDER_MUXC : string := "DIVC";
+	    OUTDIVIDER_MUXD : string := "DIVD";
+	    PLL_LOCK_MODE : integer := 0;
+	    PLL_LOCK_DELAY : integer := 200;
+	    STDBY_ENABLE : string := "DISABLED";
+	    REFIN_RESET : string := "DISABLED";
+	    SYNC_ENABLE : string := "DISABLED";
+	    INT_LOCK_STICKY : string := "ENABLED";
+	    DPHASE_SOURCE : string := "DISABLED";
+	    PLLRST_ENA : string := "DISABLED";
+	    INTFB_WAKE : string := "DISABLED"  );
+	port (
+	    CLKI :   in  std_logic;
+	    CLKFB :   in  std_logic;
+	    PHASESEL1 :   in  std_logic;
+	    PHASESEL0 :   in  std_logic;
+	    PHASEDIR :   in  std_logic;
+	    PHASESTEP :   in  std_logic;
+	    PHASELOADREG :   in  std_logic;
+	    STDBY :   in  std_logic;
+	    PLLWAKESYNC :   in  std_logic;
+	    RST :   in  std_logic;
+	    ENCLKOP :   in  std_logic;
+	    ENCLKOS :   in  std_logic;
+	    ENCLKOS2 :   in  std_logic;
+	    ENCLKOS3 :   in  std_logic;
+	    CLKOP :   out  std_logic;
+	    CLKOS :   out  std_logic;
+	    CLKOS2 :   out  std_logic;
+	    CLKOS3 :   out  std_logic;
+	    LOCK :   out  std_logic;
+	    INTLOCK :   out  std_logic;
+	    REFCLK :   out  std_logic;
+	    CLKINTFB :   out  std_logic  );
+    end component;
+
+    signal clkop : std_logic;
+    signal lock : std_logic;
+
+    -- PLL constants based on prjtrellis example
+    constant PLL_IN : natural :=    2000000;
+    constant PLL_OUT : natural := 600000000;
+
+    -- Configration for ECP5 PLL
+    constant PLL_CLKOP_DIV : natural := PLL_OUT/CLK_OUTPUT_HZ;
+    constant PLL_CLKFB_DIV : natural := CLK_OUTPUT_HZ/PLL_IN;
+    constant PLL_CLKI_DIV  : natural := CLK_INPUT_HZ/PLL_IN;
+
+begin
+    pll_clk_out <= clkop;
+    pll_locked_out <= not lock; -- FIXME: EHXPLLL lock signal active low?!?
+
+    clkgen: EHXPLLL
+	generic map(
+	    CLKOP_CPHASE => 11, -- FIXME: Copied from prjtrells.
+            CLKOP_DIV => PLL_CLKOP_DIV,
+	    CLKFB_DIV => PLL_CLKFB_DIV,
+	    CLKI_DIV  => PLL_CLKI_DIV
+	)
+	port map (
+	    CLKI => ext_clk,
+	    CLKOP => clkop,
+	    CLKFB => clkop,
+	    LOCK => lock,
+	    RST => pll_rst_in,
+	    PHASESEL1 => '0',
+	    PHASESEL0 => '0',
+	    PHASEDIR => '0',
+	    PHASESTEP => '0',
+	    PHASELOADREG => '0',
+	    STDBY => '0',
+	    PLLWAKESYNC => '0',
+	    ENCLKOP => '0',
+	    ENCLKOS => '0',
+	    ENCLKOS2 => '0',
+	    ENCLKOS3 => '0'
+    );
+
+end architecture bypass;