Add ASIC target

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
caravel-mpw5-20220322
Anton Blanchard 4 years ago committed by Anton Blanchard
parent 5249d633cf
commit c2577b5446

@ -55,15 +55,18 @@ all = core_tb icache_tb dcache_tb dmi_dtm_tb \


all: $(all) all: $(all)


core_files = decode_types.vhdl common.vhdl wishbone_types.vhdl fetch1.vhdl \ base_core_files = decode_types.vhdl common.vhdl wishbone_types.vhdl fetch1.vhdl \
utils.vhdl plru.vhdl cache_ram.vhdl icache.vhdl \ utils.vhdl plru.vhdl icache.vhdl \
decode1.vhdl helpers.vhdl insn_helpers.vhdl \ decode1.vhdl helpers.vhdl insn_helpers.vhdl \
control.vhdl decode2.vhdl register_file.vhdl \ control.vhdl decode2.vhdl \
cr_file.vhdl crhelpers.vhdl ppc_fx_insns.vhdl rotator.vhdl \ cr_file.vhdl crhelpers.vhdl ppc_fx_insns.vhdl rotator.vhdl \
logical.vhdl countbits.vhdl multiply.vhdl divider.vhdl execute1.vhdl \ logical.vhdl countbits.vhdl divider.vhdl execute1.vhdl \
loadstore1.vhdl mmu.vhdl dcache.vhdl writeback.vhdl core_debug.vhdl \ loadstore1.vhdl mmu.vhdl dcache.vhdl writeback.vhdl core_debug.vhdl \
core.vhdl fpu.vhdl pmu.vhdl core.vhdl fpu.vhdl pmu.vhdl


core_files = $(base_core_files) register_file.vhdl cache_ram.vhdl multiply.vhdl
asic_core_files = $(base_core_files) asic/register_file.vhdl asic/cache_ram.vhdl asic/multiply.vhdl

soc_files = wishbone_arbiter.vhdl wishbone_bram_wrapper.vhdl sync_fifo.vhdl \ soc_files = wishbone_arbiter.vhdl wishbone_bram_wrapper.vhdl sync_fifo.vhdl \
wishbone_debug_master.vhdl xics.vhdl syscon.vhdl gpio.vhdl soc.vhdl \ wishbone_debug_master.vhdl xics.vhdl syscon.vhdl gpio.vhdl soc.vhdl \
spi_rxtx.vhdl spi_flash_ctrl.vhdl spi_rxtx.vhdl spi_flash_ctrl.vhdl
@ -218,7 +221,6 @@ GHDL_IMAGE_GENERICS=-gMEMORY_SIZE=$(MEMORY_SIZE) -gRAM_INIT_FILE=$(RAM_INIT_FILE
-gRESET_LOW=$(RESET_LOW) -gCLK_INPUT=$(CLK_INPUT) -gCLK_FREQUENCY=$(CLK_FREQUENCY) -gICACHE_NUM_LINES=$(ICACHE_NUM_LINES) \ -gRESET_LOW=$(RESET_LOW) -gCLK_INPUT=$(CLK_INPUT) -gCLK_FREQUENCY=$(CLK_FREQUENCY) -gICACHE_NUM_LINES=$(ICACHE_NUM_LINES) \
$(LITEDRAM_GHDL_ARG) $(LITEDRAM_GHDL_ARG)



ifeq ($(FPGA_TARGET), verilator) ifeq ($(FPGA_TARGET), verilator)
RESET_LOW=true RESET_LOW=true
CLK_INPUT=50000000 CLK_INPUT=50000000
@ -226,22 +228,41 @@ CLK_FREQUENCY=50000000
clkgen=fpga/clk_gen_bypass.vhd clkgen=fpga/clk_gen_bypass.vhd
endif endif


ifeq ($(FPGA_TARGET), caravel)
MEMORY_SIZE=4096
RESET_LOW=true
CLK_INPUT=100000000
CLK_FREQUENCY=100000000
endif

fpga_files = fpga/soc_reset.vhdl \ fpga_files = fpga/soc_reset.vhdl \
fpga/pp_fifo.vhd fpga/pp_soc_uart.vhd fpga/main_bram.vhdl \ fpga/pp_fifo.vhd fpga/pp_soc_uart.vhd fpga/main_bram.vhdl \
nonrandom.vhdl nonrandom.vhdl


asic_files = fpga/pp_fifo.vhd fpga/pp_soc_uart.vhd asic/main_bram.vhdl \
asic/top-asic.vhdl $(dmi_dtm) nonrandom.vhdl

synth_files = $(core_files) $(soc_files) $(soc_extra_synth) $(fpga_files) $(clkgen) $(toplevel) $(dmi_dtm) synth_files = $(core_files) $(soc_files) $(soc_extra_synth) $(fpga_files) $(clkgen) $(toplevel) $(dmi_dtm)


asic_synth_files = $(asic_core_files) $(soc_files) $(asic_files)

microwatt.json: $(synth_files) $(RAM_INIT_FILE) microwatt.json: $(synth_files) $(RAM_INIT_FILE)
$(YOSYS) $(GHDLSYNTH) -p "ghdl --std=08 --no-formal $(GHDL_IMAGE_GENERICS) $(synth_files) -e toplevel; read_verilog $(uart_files) $(soc_extra_v); synth_ecp5 -abc9 -nowidelut -json $@ $(SYNTH_ECP5_FLAGS)" $(YOSYS) $(GHDLSYNTH) -p "ghdl --std=08 --no-formal $(GHDL_IMAGE_GENERICS) $(synth_files) -e toplevel; read_verilog $(uart_files) $(soc_extra_v); synth_ecp5 -abc9 -nowidelut -json $@ $(SYNTH_ECP5_FLAGS)"


microwatt.v: $(synth_files) $(RAM_INIT_FILE) microwatt.v: $(synth_files) $(RAM_INIT_FILE)
$(YOSYS) $(GHDLSYNTH) -p "ghdl --std=08 --no-formal $(GHDL_IMAGE_GENERICS) $(synth_files) -e toplevel; write_verilog $@" $(YOSYS) $(GHDLSYNTH) -p "ghdl --std=08 --no-formal $(GHDL_IMAGE_GENERICS) $(synth_files) -e toplevel; write_verilog $@"


microwatt_asic.v: $(asic_synth_files)
$(YOSYS) $(GHDLSYNTH) -p "ghdl --std=08 --no-formal $(GHDL_IMAGE_GENERICS) $(asic_synth_files) -e toplevel; write_verilog $@"

microwatt-verilator: microwatt.v verilator/microwatt-verilator.cpp verilator/uart-verilator.c microwatt-verilator: microwatt.v verilator/microwatt-verilator.cpp verilator/uart-verilator.c
$(VERILATOR) $(VERILATOR_FLAGS) -CFLAGS "$(VERILATOR_CFLAGS) -DCLK_FREQUENCY=$(CLK_FREQUENCY)" -Iuart16550 --assert --cc --exe --build $^ -o $@ -top-module toplevel $(VERILATOR) $(VERILATOR_FLAGS) -CFLAGS "$(VERILATOR_CFLAGS) -DCLK_FREQUENCY=$(CLK_FREQUENCY)" -Iuart16550 --assert --cc --exe --build $^ -o $@ -top-module toplevel
@cp -f obj_dir/microwatt-verilator microwatt-verilator @cp -f obj_dir/microwatt-verilator microwatt-verilator


microwatt_asic-verilator: microwatt_asic.v asic/microwatt_asic-verilator.cpp verilator/uart-verilator.c
$(VERILATOR) $(VERILATOR_FLAGS) -CFLAGS "$(VERILATOR_CFLAGS) -DCLK_FREQUENCY=$(CLK_FREQUENCY)" -Iuart16550 -Iasic/behavioural --assert --cc --exe --build $^ -o $@ -top-module toplevel
@cp -f obj_dir/microwatt_asic-verilator microwatt_asic-verilator

microwatt_out.config: microwatt.json $(LPF) microwatt_out.config: microwatt.json $(LPF)
$(NEXTPNR) --json $< --lpf $(LPF) --textcfg $@.tmp $(NEXTPNR_FLAGS) --package $(PACKAGE) $(NEXTPNR) --json $< --lpf $(LPF) --textcfg $@.tmp $(NEXTPNR_FLAGS) --package $(PACKAGE)
mv -f $@.tmp $@ mv -f $@.tmp $@
@ -324,6 +345,7 @@ _clean:
rm -f scripts/mw_debug/mw_debug rm -f scripts/mw_debug/mw_debug
rm -f microwatt.bin microwatt.json microwatt.svf microwatt_out.config rm -f microwatt.bin microwatt.json microwatt.svf microwatt_out.config
rm -f microwatt.v microwatt-verilator rm -f microwatt.v microwatt-verilator
rm -f microwatt_asic.v microwatt_asic-verilator
rm -rf obj_dir/ rm -rf obj_dir/


clean: _clean clean: _clean

@ -0,0 +1,83 @@
#include <stdlib.h>
#include "Vtoplevel.h"
#include "verilated.h"
#include "verilated_vcd_c.h"

/*
* Current simulation time
* This is a 64-bit integer to reduce wrap over issues and
* allow modulus. You can also use a double, if you wish.
*/
vluint64_t main_time = 0;

/*
* Called by $time in Verilog
* converts to double, to match
* what SystemC does
*/
double sc_time_stamp(void)
{
return main_time;
}

#if VM_TRACE
VerilatedVcdC *tfp;
#endif

void tick(Vtoplevel *top)
{
top->ext_clk = 1;
top->eval();
#if VM_TRACE
if (tfp)
tfp->dump((double) main_time);
#endif
main_time++;

top->ext_clk = 0;
top->eval();
#if VM_TRACE
if (tfp)
tfp->dump((double) main_time);
#endif
main_time++;
}

void uart_tx(unsigned char tx);
unsigned char uart_rx(void);

int main(int argc, char **argv)
{
Verilated::commandArgs(argc, argv);

// init top verilog instance
Vtoplevel* top = new Vtoplevel;

#if VM_TRACE
// init trace dump
Verilated::traceEverOn(true);
tfp = new VerilatedVcdC;
top->trace(tfp, 99);
tfp->open("microwatt-verilator.vcd");
#endif

// Reset
top->ext_rst = 0;
for (unsigned long i = 0; i < 5; i++)
tick(top);
top->ext_rst = 1;

while(!Verilated::gotFinish()) {
tick(top);

uart_tx(top->uart0_txd);
top->uart0_rxd = uart_rx();
}

#if VM_TRACE
tfp->close();
delete tfp;
#endif

delete top;
}

@ -0,0 +1,127 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

library work;
use work.wishbone_types.all;

entity toplevel is
generic (
MEMORY_SIZE : integer := 8192;
RAM_INIT_FILE : string := "firmware.hex";
RESET_LOW : boolean := true;
CLK_INPUT : positive := 100000000;
CLK_FREQUENCY : positive := 100000000;
HAS_FPU : boolean := true;
HAS_BTC : boolean := false;
NO_BRAM : boolean := false;
DISABLE_FLATTEN_CORE : boolean := false;
ALT_RESET_ADDRESS : std_logic_vector(63 downto 0) := (27 downto 0 => '0', others => '1');
SPI_FLASH_OFFSET : integer := 0;
SPI_FLASH_DEF_CKDV : natural := 4;
SPI_FLASH_DEF_QUAD : boolean := false;
SPI_BOOT_CLOCKS : boolean := false;
LOG_LENGTH : natural := 0;
UART_IS_16550 : boolean := true;
HAS_UART1 : boolean := false;
ICACHE_NUM_LINES : natural := 4;
ICACHE_NUM_WAYS : natural := 1;
ICACHE_TLB_SIZE : natural := 4;
DCACHE_NUM_LINES : natural := 4;
DCACHE_NUM_WAYS : natural := 1;
DCACHE_TLB_SET_SIZE : natural := 2;
DCACHE_TLB_NUM_WAYS : natural := 2;
HAS_GPIO : boolean := true;
NGPIO : natural := 32
);
port(
ext_clk : in std_ulogic;
ext_rst : in std_ulogic;

-- UART0 signals:
uart0_txd : out std_ulogic;
uart0_rxd : in std_ulogic;

-- SPI
spi_flash_cs_n : out std_ulogic;
spi_flash_clk : out std_ulogic;
spi_flash_sdat_i : in std_ulogic_vector(3 downto 0);
spi_flash_sdat_o : out std_ulogic_vector(3 downto 0);
spi_flash_sdat_oe : out std_ulogic_vector(3 downto 0);

-- GPIO
gpio_in : in std_ulogic_vector(NGPIO - 1 downto 0);
gpio_out : out std_ulogic_vector(NGPIO - 1 downto 0);
gpio_dir : out std_ulogic_vector(NGPIO - 1 downto 0);

-- Add an I/O pin to select fetching from flash on reset
alt_reset : in std_ulogic
);
end entity toplevel;

architecture behaviour of toplevel is
-- reset signals
signal system_rst : std_ulogic;
begin

system_rst <= not ext_rst when RESET_LOW else ext_rst;

-- Main SoC
soc0: entity work.soc
generic map(
MEMORY_SIZE => MEMORY_SIZE,
RAM_INIT_FILE => RAM_INIT_FILE,
SIM => false,
CLK_FREQ => CLK_FREQUENCY,
HAS_FPU => HAS_FPU,
HAS_BTC => HAS_BTC,
HAS_DRAM => false,
DRAM_SIZE => 0,
DRAM_INIT_SIZE => 0,
DISABLE_FLATTEN_CORE => DISABLE_FLATTEN_CORE,
ALT_RESET_ADDRESS => ALT_RESET_ADDRESS,
HAS_SPI_FLASH => true,
SPI_FLASH_DLINES => 4,
SPI_FLASH_OFFSET => SPI_FLASH_OFFSET,
SPI_FLASH_DEF_CKDV => SPI_FLASH_DEF_CKDV,
SPI_FLASH_DEF_QUAD => SPI_FLASH_DEF_QUAD,
SPI_BOOT_CLOCKS => SPI_BOOT_CLOCKS,
LOG_LENGTH => LOG_LENGTH,
UART0_IS_16550 => UART_IS_16550,
HAS_UART1 => HAS_UART1,
HAS_GPIO => HAS_GPIO,
NGPIO => NGPIO,
ICACHE_NUM_LINES => ICACHE_NUM_LINES,
ICACHE_NUM_WAYS => ICACHE_NUM_WAYS,
ICACHE_TLB_SIZE => ICACHE_TLB_SIZE,
DCACHE_NUM_LINES => DCACHE_NUM_LINES,
DCACHE_NUM_WAYS => DCACHE_NUM_WAYS,
DCACHE_TLB_SET_SIZE => DCACHE_TLB_SET_SIZE,
DCACHE_TLB_NUM_WAYS => DCACHE_TLB_NUM_WAYS
)
port map (
-- System signals
system_clk => ext_clk,
rst => system_rst,

-- UART signals
uart0_txd => uart0_txd,
uart0_rxd => uart0_rxd,

-- SPI signals
spi_flash_sck => spi_flash_clk,
spi_flash_cs_n => spi_flash_cs_n,
spi_flash_sdat_o => spi_flash_sdat_o,
spi_flash_sdat_oe => spi_flash_sdat_oe,
spi_flash_sdat_i => spi_flash_sdat_i,

-- GPIO signals
gpio_in => gpio_in,
gpio_out => gpio_out,
gpio_dir => gpio_dir,

-- Reset PC to flash offset 0 (ie 0xf000000)
alt_reset => alt_reset
);

end architecture behaviour;
Loading…
Cancel
Save