Commit Graph

821 Commits (605010e33d2153f0f499ed508f66933945ae53f4)
 

Author SHA1 Message Date
Anton Blanchard 605010e33d Fix ghdl warning due to variable shadowing in icache
Fix a couple of ghdl warnings:

icache.vhdl:387:21⚠️ declaration of "i" hides constant "i" [-Whide]
icache.vhdl:400:17⚠️ declaration of "i" hides constant "i" [-Whide]

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Michael Neuling 16da9b5ba7
Merge pull request #249 from paulusmack/master
Sundry bug fixes, plus implement mtmsr
4 years ago
Michael Neuling b60026e7c1
Merge pull request #250 from umarcor/containers
makefile: update synthesis containers
4 years ago
Michael Neuling d839037f0b
Merge pull request #251 from umarcor/ci/containers
ci: use job.container
4 years ago
umarcor 93b2987b19 ci: use job.container
Signed-off-by: umarcor <unai.martinezcorral@ehu.eus>
4 years ago
umarcor de808d7a6a makefile: update synthesis containers
Signed-off-by: umarcor <unai.martinezcorral@ehu.eus>
4 years ago
umarcor d05737833e makefile: whitespace cleanup
Signed-off-by: umarcor <unai.martinezcorral@ehu.eus>
4 years ago
Paul Mackerras 29fabeb12e tests/misc: Add a test for correct CTR and LR updating by branches
This adds a test with a bdnzl followed immediately by a bdnz, to check
that CTR and LR both get evaluated and written back correctly in this
situation.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras e49192cb5b execute1: Fix forwarding of result when doing delayed LR update
Random execution testcases showed that a bdnzl which doesn't branch,
followed immediately by a bdnz, uses the wrong value for CTR for the
bdnz.  Decode2 detects the read-after-write hazard on CTR and tells
execute1 to use the bypass path.  However, the bdnzl takes two cycles
because it has to write back both CTR and LR, meaning that by the time
the bdnz starts to execute, r.e.write_data no longer contains the CTR
value, but instead contains zero.

To fix this, we make execute1 maintain the written-back value of CTR
in r.e.write_data across the cycle where LR is written back (this is
possible because the LR writeback uses the exc_write_data path).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 27ac74a341 execute1: Fix writing LR for bdnzl/bdzl instructions
Branch instructions which do a redirect and write both CTR and LR were
not doing the write to LR due to a logic error.  This fixes it.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 1037c6aa2e core: Implement mtmsr instruction
This is like mtmsrd except it only alters the lower 32 bits of the MSR.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 144433218f tests/trace: Test trace interrupt vs. FP unavailable interrupt
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras b0f7237b7f execute1: Fix bug in trace interrupt vs. ITLB miss
If an instruction fetch results in an instruction TLB miss, an
OP_FETCH_FAILED instruction is sent down the pipe.  If the MSR[TE]
field is set for instruction tracing, the core currently considers
that executing the OP_FETCH_FAILED counts as having executed one
instruction and so generates a trace interrupt on the next valid
instruction, meaning that the trace interrupt happens before the
desired instruction rather than after it.

Fix this by not tracing OP_FETCH_FAILED instructions.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Michael Neuling e40e752b9a
Merge pull request #245 from paulusmack/fpu
Add a simple FPU
4 years ago
Michael Neuling 168d30c07a
Merge pull request #244 from paulusmack/master
Implement trace interrupts plus decode improvements
4 years ago
Paul Mackerras 73f819301b FPU: Do masking after adder rather than on A input
The masking enabled by opsel_amask is only used when rounding, to trim
the rounded result to the required precision.  We now do the masking
after the adder rather than before (on the A input).  This gives the
same result and helps timing.  The path from r.shift through the mask
generator and adder to v.r was showing up as a critical path.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras e1ca023bad FPU: Decide on mask length a cycle earlier
This moves longmask into the reg_type record, meaning that it now
needs to be decided a cycle earlier, in order to help timing.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras fb5115c944 FPU: Decide on A input selection a cycle earlier
This moves opsel_a into the reg_type record, meaning that the A
multiplexer input now needs to be decided a cycle earlier.  This helps
timing by eliminating the combinatorial path from r.state and other
things to opsel_a and thence to in_a and result.

This means that some things now take an extra cycle, in particular
some of the exception cases such as when one or both operands are
NaNs.  The NaN handling has been moved out to its own state, which
simplifies the logic for exception cases in other places.  Additions
or subtractions where FRB's exponent is smaller than FRA's will
also take an extra cycle.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras b0b3c0dc70 FPU: Add comments specifying the expectation of r.shift for each state
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras dc1544db69 FPU: Implement floating multiply-add instructions
This implements fmadd, fmsub, fnmadd, fnmsub and their
single-precision counterparts.  The single-precision versions operate
the same as the double-precision versions until the final rounding and
overflow/underflow steps.

This adds an S register to store the low bits of the product.  S
shifts into R on left shifts, and can be negated, but doesn't do any
other arithmetic.

This adds a test for the double-precision versions of these
instructions.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras c083b9507d FPU: Implement ftdiv and ftsqrt
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras c350bc1f25 FPU: Implement fsqrt[s] and add a test for fsqrt
This implements the floating square-root calculation using a table
lookup of the inverse square root approximation, followed by three
iterations of Goldschmidt's algorithm, which gives estimates of both
sqrt(FRB) and 1/sqrt(FRB).  Then the residual is calculated as
FRB - R * R and that is multiplied by the 1/sqrt(FRB) estimate to get
an adjustment to R.  The residual and the adjustment can be negative,
and since we have an unsigned multiplier, the upper bits can be wrong.
In practice the adjustment fits into an 8-bit signed value, and the
bottom 8 bits of the adjustment product are correct, so we sign-extend
them, divide by 4 (because R is in 10.54 format) and add them to R.

Finally the residual is calculated again and compared to 2*R+1 to see
if a final increment is needed.  Then the result is rounded and
written back.

This implements fsqrts as fsqrt, but with rounding to single precision
and underflow/overflow calculation using the single-precision exponent
range.  This could be optimized later.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 394f993e75 FPU: Implement frsqrte[s] and a test for frsqrte
This implements frsqrte by table lookup.  We first normalize the input
if necessary and adjust so that the exponent is even, giving us a
mantissa value in the range [1.0, 4.0), which is then used to look up
an entry in a 768-entry table.  The 768 entries are appended to the
table for reciprocal estimates, giving a table of 1024 entries in
total.  frsqrtes is implemented identically to frsqrte.

The estimate supplied is accurate to 1 part in 1024 or better.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras e1bbb786c0 tests/fpu: Add tests for fsel and fcmpu
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 49f3d1e77a FPU: Implement fcmpu and fcmpo
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 4cd9301da6 FPU: Implement fsel
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 4ad5ab9203 FPU: Implement fre[s]
This just returns the value from the inverse lookup table.  The result
is accurate to better than one part in 512 (the architecture requires
1/256).

This also adds a simple test, which relies on the particular values in
the inverse lookup table, so it is not a general test.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 9cce936251 FPU: Implement fdiv[s]
This implements floating-point division A/B by a process that starts
with normalizing both inputs if necessary.  Then an estimate of 1/B
from a lookup table is refined by 3 Newton-Raphson iterations and then
multiplied by A to get a quotient.  The remainder is calculated as
A - R * B (where R is the result, i.e. the quotient) and the remainder
is compared to 0 and to B to see whether the quotient needs to be
incremented by 1.  The calculations of 1 / B are done with 56 fraction
bits and intermediate results are truncated rather than rounded,
meaning that the final estimate of 1 / B is always correct or a little
bit low, never too high, and thus the calculated quotient is correct
or 1 unit too low.  Doing the estimate of 1 / B with sufficient
precision that the quotient is always correct to the last bit without
needing any adjustment would require many more bits of precision.

This implements fdivs by computing a double-precision quotient and
then rounding it to single precision.  It would be possible to
optimize this by e.g. doing only 2 iterations of Newton-Raphson and
then doing the remainder calculation and adjustment at single
precision rather than double precision.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras e6a5f237bc FPU: Implement fmul[s]
This implements the fmul and fmuls instructions.

For fmul[s] with denormalized operands we normalize the inputs
before doing the multiplication, to eliminate the need for doing
count-leading-zeroes on P.  This adds 3 or 5 cycles to the
execution time when one or both operands are denormalized.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 86b826cd7e FPU: Implement fadd[s] and fsub[s] and add tests for them
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 4807d0bdb6 FPU: Implement fmrgew and fmrgow and add tests for them
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 0ad2aa3014 FPU: Implement floating round-to-integer instructions
This implements frin, friz, frip and frim, and adds tests for them.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 03d1aa968a FPU: Implement floating convert to integer instructions
This implements fctiw, fctiwz, fctiwu, fctiwuz, fctid, fctidz, fctidu
and fctiduz, and adds tests for them.

There are some subtleties around the setting of the inexact (XX) and
invalid conversion (VXCVI) flags in the FPSCR.  If the rounded value
ends up being out of range, we need to set VXCVI and not XX.  For a
conversion to unsigned word or doubleword of a negative value that
rounds to zero, we need to set XX and not VXCVI.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 36130f1db3 tests/fpu: Add tests for frsp
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 34b5d4a7b5 FPU: Implement the frsp instruction
This brings in the invalid exception for the case of frsp with a
signalling NaN as input, and the need to be able to convert a
signalling NaN to a quiet NaN.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 9e8fb293ed FPU: Implement floating convert from integer instructions
This implements fcfid, fcfidu, fcfids and fcfidus, which convert
64-bit integer values in an FPR into a floating-point value.
This brings in a lot of the datapath that will be needed in
future, including the shifter, adder, mask generator and
count-leading-zeroes logic, along with the machinery for rounding
to single-precision or double-precision, detecting inexact results,
signalling inexact-result exceptions, and updating result flags
in the FPSCR.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras b628af6176 FPU: Implement fmr and related instructions
This implements fmr, fneg, fabs, fnabs and fcpsgn and adds tests
for them.

This adds logic to unpack and repack floating-point data from the
64-bit packed form (as stored in memory and the register file) into
the unpacked form in the fpr_reg_type record.  This is not strictly
necessary for fmr et al., but will be useful for when we do actual
arithmetic.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras cb27353f37 tests/fpu: Test remaining FPSCR-related instructions
This adds tests for mffsce, mffscrn, mffscrni, mffsl, mcrfs, mtfsfi,
mtfsb0 and mtfsb1.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras fc2968f132 FPU: Implement remaining FPSCR-related instructions
This implements mcrfs, mtfsfi, mtfsb0/1, mffscr, mffscrn, mffscrni and
mffsl.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras bf1d9e9531 tests/fpu: Add tests for basic FPSCR function and interrupt generation
This tests mffs, mtfsf and the generation of floating-point type
program interrupts that occur as a result of mtfsf.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 856e9e955f core: Add framework for an FPU
This adds the skeleton of a floating-point unit and implements the
mffs and mtfsf instructions.

Execute1 sends FP instructions to the FPU and receives busy,
exception, FP interrupt and illegal interrupt signals from it.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 76ec1a2f0a tests/fpu: Add tests for lfs and stfs instructions
This exercises the single-to-double and double-to-single conversions,
including denormalized cases.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 9d285a265c core: Add support for single-precision FP loads and stores
This adds code to loadstore1 to convert between single-precision and
double-precision formats, and implements the lfs* and stfs*
instructions.  The conversion processes are described in Power ISA
v3.1 Book 1 sections 4.6.2 and 4.6.3.

These conversions take one cycle, so lfs* and stfs* are one cycle
slower than lfd* and stfd*.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras bcac4b9b2f tests: Add a test for FP loads and stores
This tests that floating-point unavailable exceptions occur as expected
on FP loads and stores, and that the simple FP loads and stores appear
to give reasonable results.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 45cd8f4fc3 core: Add support for floating-point loads and stores
This extends the register file so it can hold FPR values, and
implements the FP loads and stores that do not require conversion
between single and double precision.

We now have the FP, FE0 and FE1 bits in MSR.  FP loads and stores
cause a FP unavailable interrupt if MSR[FP] = 0.

The FPU facilities are optional and their presence is controlled by
the HAS_FPU generic passed down from the top-level board file.  It
defaults to true for all except the A7-35 boards.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras e1672ea709 tests: Add a test for trace interrupts
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras b589d2d472 execute1: Implement trace interrupts
Trace interrupts occur when the MSR[TE] field is non-zero and an
instruction other than rfid has been successfully completed.  A trace
interrupt occurs before the next instruction is executed or any
asynchronous interrupt is taken.

Since the trace interrupt is defined to set SRR1 bits depending on
whether the traced instruction is a load or an instruction treated as
a load, or a store or an instruction treated as a store, we need to
make sure the treated-as-a-load instructions (icbi, icbt, dcbt, dcbst,
dcbf) and the treated-as-a-store instructions (dcbtst, dcbz) have the
correct opcodes in decode1.  Several of them were previously marked as
OP_NOP.

We don't yet implement the SIAR or SDAR registers, which should be set
by trace interrupts.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 6a80825e70 decode1: Avoid overriding fields of v.decode in decode1
In the cases where we need to override the values from the decode ROMs,
we now do that overriding after the clock edge (eating into decode2's
cycle) rather than before.  This helps timing a little.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Michael Neuling da4be71bd3
Merge pull request #239 from paulusmack/master
Implement BE and 32b modes
4 years ago
Paul Mackerras e7a08f33eb tests: Add a test for the load-reserve and store-conditional instructions
This checks that the instructions seem to update memory as expected,
and also that they generate alignment interrupts when necessary.
We don't check whether the memory update is atomic as we don't have
SMP yet.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago