Commit Graph

980 Commits (65c43b488bff9157d2a9e83ba6ce5b851604536a)
 

Author SHA1 Message Date
Paul Mackerras 4fd8d9509c execute1: Move CR result to data path process
Also work out in decode2 whether the instruction sets the XER common
bits.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras d6ac43251a execute1: Move data-path logic out to a separate process
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras ae2afeca5c core: Track CR hazards and bypasses using tags
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras d290d2a9bb core: Restore bypass path from execute1
This changes the bypass path.  Previously it went from after
execute1's output to after decode2's output.  Now it goes from before
execute1's output register to before decode2's output register.  The
reason is that the new path will be simpler to manage when there are
possibly multiple instructions in flight.  This means that the
bypassing can be managed inside decode2 and control.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras c0b45e153b core: Track GPR hazards using tags that propagate through the pipelines
This changes the way GPR hazards are detected and tracked.  Instead of
having a model of the pipeline in gpr_hazard.vhdl, which has to mirror
the behaviour of the real pipeline exactly, we now assign a 2-bit tag
to each instruction and record which GSPR the instruction writes.
Subsequent instructions that need to use the GSPR get the tag number
and stall until the value with that tag is being written back to the
register file.

For now, the forwarding paths are disabled.  That gives about a 8%
reduction in coremark performance.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras a1d7b54f76 core: Crack branches that update both CTR and LR
This uses the instruction doubling machinery to convert conditional
branch instructions that update both CTR and LR (e.g., bdnzl, bdnzlrl)
into two instructions, of which the first updates CTR and determines
whether the branch is taken, and the second updates LR and does the
redirect if necessary.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 4c61a71a62 core: Crack update-form loads into two internal ops
This uses the instruction-doubling machinery to send load with update
instructions down to loadstore1 as two separate ops, rather than
one op with two destinations.  This will help to simplify the value
tracking mechanisms.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 0fb207be60 fetch1: Implement a simple branch target cache
This implements a cache in fetch1, where each entry stores the address
of a simple branch instruction (b or bc) and the target of the branch.
When fetching sequentially, if the address being fetched matches the
cache entry, then fetching will be redirected to the branch target.
The cache has 1024 entries and is direct-mapped, i.e. indexed by bits
11..2 of the NIA.

The bus from execute1 now carries information about taken and
not-taken simple branches, which fetch1 uses to update the cache.
The cache entry is updated for both taken and not-taken branches, with
the valid bit being set if the branch was taken and cleared if the
branch was not taken.

If fetching is redirected to the branch target then that goes down the
pipe as a predicted-taken branch, and decode1 does not do any static
branch prediction.  If fetching is not redirected, then the next
instruction goes down the pipe as normal and decode1 does its static
branch prediction.

In order to make timing, the lookup of the cache is pipelined, so on
each cycle the cache entry for the current NIA + 8 is read.  This
means that after a redirect (from decode1 or execute1), only the third
and subsequent sequentially-fetched instructions will be able to be
predicted.

This improves the coremark value on the Arty A7-100 from about 180 to
about 190 (more than 5%).

The BTC is optional.  Builds for the Artix 7 35-T part have it off by
default because the extra ~1420 LUTs it takes mean that the design
doesn't fit on the Arty A7-35 board.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras f7b855dfc3 execute1: Improve timing on comparisons
Using the main adder for comparisons has the disadvantage of creating
a long path from the CA/OV bit forwarding to v.busy via the carry
input of the adder, the comparison result, and determining whether a
trap instruction would trap.  Instead we now have dedicated
comparators for the high and low words of a_in vs. b_in, and combine
their results to get the signed and unsigned comparison results.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras b0510fd1bb core: Reorganize execute1
This breaks up the enormous if .. elsif .. case .. elsif statement in
execute1 in order to try to make it simpler and more understandable.
We now have decode2 deciding whether the instruction has a value to be
written back to a register (GPR, GSPR, FPR, etc.) rather than
individual cases in execute1 setting result_en.  The computation of
the data to be written back is now independent of detection of various
exception conditions.  We now have an if block determining if any
exception condition exists which prevents the next instruction from
being executed, then the case statement which performs actions such as
setting carry/overflow bits, determining if a trap exception exists,
doing branches, etc., then an if statement for all the r.busy = 1
cases (continuing execution of an instruction which was started in a
previous cycle, or writing SRR1 for an interrupt).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras c0f282b691 decode1: Implement tlbsync as a no-op
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 658feabfd4 core: Make result multiplexing explicit
This adds an explicit multiplexer feeding v.e.write_data in execute1,
with the select lines determined in the previous cycle based on the
insn_type.  Similarly, for multiply and divide instructions, there is
now an explicit multiplexer.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras d6134babc0 decode1: Implement obsolete dst, dstst, dss instructions as no-ops
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 9ea1ab0215 execute1: Move branch adder after register
This does the addition of the instruction NIA and the branch offset
after the register at the output of execute1 rather than before.
The propagation through the adder was showing up as a critical path
on the A7-100.  Performance is unaffected and now it makes timing.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 89a67a18d0 decode: Add a facility field to the instruction decode tables
This makes it simpler to work out when to deliver a FPU unavailable
interrupt.  This also means we can get rid of the OP_FPLOAD and
OP_FPSTORE insn_type values.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras cb1e3f6d70 decode1: Take an extra cycle for predicted branch redirects
This does the addition of NIA plus the branch offset from the
instruction after a clock edge, in order to ease timing, as the path
from the icache RAM through the adder in decode1 to the NIA register
in fetch1 was showing up as a critical path.

This adds one extra cycle of latency when redirecting fetch because of
a predicted-taken branch.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras ec5730a75a tests: Add tests for lq/stq and lqarx/stqcx.
Lq and stq are tested in both BE and LE modes (though only 64-bit
mode) by the 'modes' test.

Lqarx and stqcx. are tested by the 'reservation' test in LE mode mode
(64-bit).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 6427cab46f loadstore1/dcache: Send store data one cycle later
This makes timing easier and also means that store floating-point
single precision instructions no longer need to take an extra cycle.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 4b2c23703c core: Implement quadword loads and stores
This implements the lq, stq, lqarx and stqcx. instructions.

These instructions all access two consecutive GPRs; for example the
"lq %r6,0(%r3)" instruction will load the doubleword at the address
in R3 into R7 and the doubleword at address R3 + 8 into R6.  To cope
with having two GPR sources or destinations, the instruction gets
repeated at the decode2 stage, that is, for each lq/stq/lqarx/stqcx.
coming in from decode1, two instructions get sent out to execute1.

For these instructions, the RS or RT register gets modified on one
of the iterations by setting the LSB of the register number.  In LE
mode, the first iteration uses RS|1 or RT|1 and the second iteration
uses RS or RT.  In BE mode, this is done the other way around.  In
order for decode2 to know what endianness is currently in use, we
pass the big_endian flag down from icache through decode1 to decode2.
This is always in sync with what execute1 is using because only rfid
or an interrupt can change MSR[LE], and those operations all cause
a flush and redirect.

There is now an extra column in the decode tables in decode1 to
indicate whether the instruction needs to be repeated.  Decode1 also
enforces the rule that lq with RT = RT and lqarx with RA = RT or
RB = RT are illegal.

Decode2 now passes a 'repeat' flag and a 'second' flag to execute1,
and execute1 passes them on to loadstore1.  The 'repeat' flag is set
for both iterations of a repeated instruction, and 'second' is set
on the second iteration.  Execute1 does not take asynchronous or
trace interrupts on the second iteration of a repeated instruction.

Loadstore1 uses 'next_addr' for the second iteration of a repeated
load/store so that we access the second doubleword of the memory
operand.  Thus loadstore1 accesses the doublewords in increasing
memory order.  For 16-byte loads this means that the first iteration
writes GPR RT|1.  It is possible that RA = RT|1 (this is a legal
but non-preferred form), meaning that if the memory operand was
misaligned, the first iteration would overwrite RA but then the
second iteration might take a page fault, leading to corrupted state.
To avoid that possibility, 16-byte loads in LE mode take an
alignment interrupt if the operand is not 16-byte aligned.  (This
is the case anyway for lqarx, and we enforce it for lq as well.)

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras d1f35705c0 loadstore1: Improve timing of data path from cache RAM to writeback
Work out select inputs for writeback mux a cycle earlier.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 784d409999 dcache: Add more commentary, no code change
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 54f89afab7 loadstore1: Decide on load formatting controls a cycle earlier
This helps timing.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 55f7d99376 decode1: Fix decoding of recommended NOP instruction
We were decoding nop with the wrong major opcode.  Fix it.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 3361c460b8 core_debug: Stop logging 256 cycles after trigger
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 470f1b2140 core_debug: Add an address trigger to stop logging at a given address
This compares the address being fetched with the contents of a
register that can be set via DMI, and if they match, stops the
logging.  Since this works on the address being fetched rather than
executed, it is subject to false positives.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 5535257c71 FPU: Don't use mask generator for rounding
Instead of using the mask generator in the rounding process, this uses
simpler logic to add in a 1 at the appropriate position (bit 2 or bit
31, depending on precision) and mask off the low-order bits.  Since
there are only two positions at which the masking and incrementing
need to be done, we don't need the full generality of the mask
generator.  This reduces the amount of logic and improves timing.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 45c5236700 FPU: Relax timing around multiplier output
At present there is a state transition in the handling of the fmadd
instructions where the next state depends on the sign bit of the
multiplier result.  This creates a critical path which doesn't make
timing on the A7-100.  To fix this, we make the state transition
independent of the sign of the multiplier result, which improves
timing, but means we take one more cycle to do a fmadd-family
instruction in some cases.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras f14e731ec6 mw_debug: Display terminated status when stopping
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 6baf3b519f mw_debug: Extend to handle FPRs
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 2be2440734 Arty A7: Document pin connections for on-board headers
This adds, as comments, lines which would if uncommented define
properties which associate the pins of the headers on the Arty A7
board with FPGA pins.  It also adds properties for LEDs 1--3, also
commented out for now.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras d5cf4acfdb execute1: Update comments about XER forwarding
This deletes some commentary that is now out of date and replaces it
with a simple statement about the XER common bits being forwarded from
the output of execute1 to the input.

The comment being deleted talked about a hazard if an instruction that
modifies XER[SO] is immediately followed by a store conditional.  That
is no longer a problem because the operands for loadstore1 are sent
from execute1 (and therefore have the forwarded value) rather than
decode2.  This was in fact fixed in 5422007f83 ("Plumb loadstore1
input from execute1 not decode2", 2020-01-14).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 5f8279a14a
Merge pull request #263 from antonblanchard/reset-pid
Initialize PID register
4 years ago
Paul Mackerras 45b7312e89
Merge pull request #262 from antonblanchard/reset-tb-decr
Reset TB and DECR
4 years ago
Paul Mackerras 00446a9169
Merge pull request #259 from antonblanchard/dmi-reset
Reset JTAG/DMI
4 years ago
Anton Blanchard 3f1e2b3a4f
Merge pull request #265 from antonblanchard/another-spi-rxtx-reset-issu
Fix another reset issue in spi_rxtx
4 years ago
Anton Blanchard 75be7803b2
Merge pull request #264 from antonblanchard/reset-spi-txrx
Reset cmd_ready_o in spi_txrx
4 years ago
Anton Blanchard 740f013284 Initialize PID register
If the PID register is read before it is written we'll consume
X state data.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard a0eb4eec17 Fix another reset issue in spi_rxtx
counter was X state after reset, initialize it.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard bf9a446e3f Reset cmd_ready_o in spi_txrx
Initialize bit_count so that cmd_ready_o isn't X state immediately
after reset.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard e1bac4d6e7 Reset TB and DECR
We don't care what the values of TB and DECR are after reset, but we
don't want the X state to propagate to other parts of the chip.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard 39c826aa46
Merge pull request #261 from antonblanchard/wishbone_layout
Make wishbone_master_out and wb_io_master_out match
4 years ago
Anton Blanchard ebe696affc
Merge pull request #260 from paulusmack/misc
soc: Drive uart1_irq to 0 when we don't have UART1
4 years ago
Anton Blanchard c6dfc19d89 Make wishbone_master_out and wb_io_master_out match
This makes it easier to parse the records in verilog because they
are getting flattened into an array of bits by ghdl/yosys.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Paul Mackerras e41cb01bca fetch1: Fix debug stop
The ability to stop the core using the debug interface has been broken
since commit bb4332b7e6b5 ("Remove fetch2 pipeline stage"), which
removed a statement that cleared the valid bit on instructions when
their stop_mark was 1.

Fix this by clearing r.req coming out of fetch1 when r.stop_mark = 1.
This has the effect of making i_out.valid be 0 from the icache.  We
also fix a bug in icache.vhdl where it was not honouring i_in.req when
use_previous = 1.

It turns out that the logic in fetch1.vhdl to handle stopping and
restarting was not correct, with the effect that stopping the core
would leave NIA pointing to the last instruction executed, not the
next instruction to be executed.  In fact the state machine is
unnecessary and the whole thing can be simplified enormously - we
need to increment NIA whenever stop_in = 0 in the previous cycle.

Fixes: bb4332b7e6b5 ("Remove fetch2 pipeline stage")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 97586e7e99 soc: Drive uart1_irq to 0 when we don't have UART1
The tools complain about uart1_irq not being driven and not having a
default when HAS_UART1 is false.  This sets it to 0 in that case.

Fixes: 7575b1e0c2 ("uart: Import and hook up opencore 16550 compatible UART")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Anton Blanchard 5eb351b4be Reset JTAG/DMI
request is never initialized and we leak X state control signals to other
parts of the core (eg dmi_wr). Add a reset.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Michael Neuling d96ee21c39
Merge pull request #256 from antonblanchard/flash-reset
Fix a few reset issues in flash controller
4 years ago
Paul Mackerras f4831507b3
Merge pull request #257 from antonblanchard/nofpu-fix
Fully initialize FPU buses when FPU is disabled
4 years ago
Anton Blanchard c870040a20 Fix an issue in flash controller when BOOT_CLOCKS is false
If BOOT_CLOCKS is false we currently get stuck in the flash
state machine. This patch from Ben fixes it.

Also fix an x state issue I see in icarus verilog where we need
to reset auto_state.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard 659be2780f Fully initialize FPU buses when FPU is disabled
Some of the bits in the FPU buses end up as z state. Yosys
flags them, so we may as well clean it up.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago