Commit Graph

13 Commits (c05441bf47937505dd3014b79dc3014c985dbede)

Author SHA1 Message Date
Benjamin Herrenschmidt bc2acfde2f wb_arbiter: Make arbiter size parametric
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 8e0389b973 ram: Rework main RAM interface
This replaces the simple_ram_behavioural and mw_soc_memory modules
with a common wishbone_bram_wrapper.vhdl that interfaces the
pipelined WB with a lower-level RAM module, along with an FPGA
and a sim variants of the latter.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt d2762e70e5 Add option to not flatten hierarchy
Vivado by default tries to flatten the module hierarchy to improve
placement and timing. However this makes debugging timing issues
really hard as the net names in the timing report can be pretty
bogus.

This adds a generic that can be used to control attributes to stop
vivado from flattening the main core components. The resulting design
will have worst timing overall but it will be easier to understand
what the worst timing path are and address them.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt df1a9237f6 intercon: Generate stall signals for non-pipelined slaves
So far the UART and the "miss" case. Memory will be
pipelined

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 6dd0b514ac Reduce wishbone address size to 32-bit
For now ... it reduces the routing pressure on the FPGA

This needs manual adjustment of the address decoder in soc.vhdl, at
least until I can figure out how to deal with std_match

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

# Conflicts:
#	soc.vhdl

# Conflicts:
#	soc.vhdl
5 years ago
Alastair D'Silva ccd52bf6f2 Tighten UART address
The current scheme has UART0 repeating throughout the UART address range.

This patch tightens the address checking so that it only occurs once.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
5 years ago
Benjamin Herrenschmidt 98f0994698 Add core debug module
This module adds some simple core controls:

  reset, stop, start, step

along with icache clear and reading the NIA and core
status bits

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org
5 years ago
Benjamin Herrenschmidt ad14a41d80 Add DMI address decoder
And prepare signals for core DMI support

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt b46f81fae4 Wishbone debug module
This adds a debug module off the DMI (debug) bus which can act as a
wishbone master to generate read and write cycles.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt ee52fd4d80 Add a debug (DMI) bus and a JTAG interface to it on Xilinx FPGAs
This adds a simple bus that can be mastered from an external
system via JTAG, which will be used to hookup various debug
modules.

It's loosely based on the RiscV model (hence the DMI name).

The module currently only supports hooking up to a Xilinx BSCANE2
but it shouldn't be too hard to adapt it to support different TAPs
if necessary.

The JTAG protocol proper is not exactly the RiscV one at this point,
though I might still change it.

This comes with some sim variants of Xilinx BSCANE2 and BUFG and a
test bench.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 1206dfe18c Use a 3 way WB arbiter and cleanup fpga toplevel
The 3rd master is currently unused, it will host the WB debug module.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt d3acb5cce9 Switch soc to use std_ulogic
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 3ac1dbc737 Share soc.vhdl between FPGA and sim
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago