You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/decode2.vhdl

378 lines
12 KiB
VHDL

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library work;
use work.decode_types.all;
use work.common.all;
use work.helpers.all;
use work.insn_helpers.all;
entity decode2 is
generic (
EX1_BYPASS : boolean := true
);
port (
clk : in std_ulogic;
rst : in std_ulogic;
complete_in : in std_ulogic;
stall_in : in std_ulogic;
stall_out : out std_ulogic;
stopped_out : out std_ulogic;
flush_in: in std_ulogic;
d_in : in Decode1ToDecode2Type;
e_out : out Decode2ToExecute1Type;
r_in : in RegisterFileToDecode2Type;
r_out : out Decode2ToRegisterFileType;
c_in : in CrFileToDecode2Type;
c_out : out Decode2ToCrFileType
);
end entity decode2;
architecture behaviour of decode2 is
type reg_type is record
e : Decode2ToExecute1Type;
end record;
signal r, rin : reg_type;
type decode_input_reg_t is record
reg_valid : std_ulogic;
reg : gspr_index_t;
data : std_ulogic_vector(63 downto 0);
end record;
type decode_output_reg_t is record
reg_valid : std_ulogic;
reg : gspr_index_t;
end record;
function decode_input_reg_a (t : input_reg_a_t; insn_in : std_ulogic_vector(31 downto 0);
reg_data : std_ulogic_vector(63 downto 0);
ispr : gspr_index_t) return decode_input_reg_t is
begin
if t = RA or (t = RA_OR_ZERO and insn_ra(insn_in) /= "00000") then
assert is_fast_spr(ispr) = '0' report "Decode A says GPR but ISPR says SPR:" &
to_hstring(ispr) severity failure;
return ('1', gpr_to_gspr(insn_ra(insn_in)), reg_data);
elsif t = SPR then
-- ISPR must be either a valid fast SPR number or all 0 for a slow SPR.
-- If it's all 0, we don't treat it as a dependency as slow SPRs
-- operations are single issue.
--
assert is_fast_spr(ispr) = '1' or ispr = "000000"
report "Decode A says SPR but ISPR is invalid:" &
to_hstring(ispr) severity failure;
return (is_fast_spr(ispr), ispr, reg_data);
else
return ('0', (others => '0'), (others => '0'));
end if;
end;
function decode_input_reg_b (t : input_reg_b_t; insn_in : std_ulogic_vector(31 downto 0);
reg_data : std_ulogic_vector(63 downto 0);
ispr : gspr_index_t) return decode_input_reg_t is
variable ret : decode_input_reg_t;
begin
case t is
when RB =>
assert is_fast_spr(ispr) = '0' report "Decode B says GPR but ISPR says SPR:" &
to_hstring(ispr) severity failure;
ret := ('1', gpr_to_gspr(insn_rb(insn_in)), reg_data);
when CONST_UI =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(unsigned(insn_ui(insn_in)), 64)));
when CONST_SI =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_si(insn_in)), 64)));
when CONST_SI_HI =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_si(insn_in)) & x"0000", 64)));
when CONST_UI_HI =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(unsigned(insn_si(insn_in)) & x"0000", 64)));
when CONST_LI =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_li(insn_in)) & "00", 64)));
when CONST_BD =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_bd(insn_in)) & "00", 64)));
when CONST_DS =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_ds(insn_in)) & "00", 64)));
when CONST_M1 =>
ret := ('0', (others => '0'), x"FFFFFFFFFFFFFFFF");
when CONST_SH =>
ret := ('0', (others => '0'), x"00000000000000" & "00" & insn_in(1) & insn_in(15 downto 11));
when CONST_SH32 =>
ret := ('0', (others => '0'), x"00000000000000" & "000" & insn_in(15 downto 11));
when SPR =>
-- ISPR must be either a valid fast SPR number or all 0 for a slow SPR.
-- If it's all 0, we don't treat it as a dependency as slow SPRs
-- operations are single issue.
assert is_fast_spr(ispr) = '1' or ispr = "000000"
report "Decode B says SPR but ISPR is invalid:" &
to_hstring(ispr) severity failure;
ret := (is_fast_spr(ispr), ispr, reg_data);
when NONE =>
ret := ('0', (others => '0'), (others => '0'));
end case;
return ret;
end;
function decode_input_reg_c (t : input_reg_c_t; insn_in : std_ulogic_vector(31 downto 0);
reg_data : std_ulogic_vector(63 downto 0)) return decode_input_reg_t is
begin
case t is
when RS =>
return ('1', gpr_to_gspr(insn_rs(insn_in)), reg_data);
when NONE =>
return ('0', (others => '0'), (others => '0'));
end case;
end;
function decode_output_reg (t : output_reg_a_t; insn_in : std_ulogic_vector(31 downto 0);
ispr : gspr_index_t) return decode_output_reg_t is
begin
case t is
when RT =>
return ('1', gpr_to_gspr(insn_rt(insn_in)));
when RA =>
return ('1', gpr_to_gspr(insn_ra(insn_in)));
when SPR =>
-- ISPR must be either a valid fast SPR number or all 0 for a slow SPR.
-- If it's all 0, we don't treat it as a dependency as slow SPRs
-- operations are single issue.
assert is_fast_spr(ispr) = '1' or ispr = "000000"
report "Decode B says SPR but ISPR is invalid:" &
to_hstring(ispr) severity failure;
return (is_fast_spr(ispr), ispr);
when NONE =>
return ('0', "000000");
end case;
end;
function decode_rc (t : rc_t; insn_in : std_ulogic_vector(31 downto 0)) return std_ulogic is
begin
case t is
when RC =>
return insn_rc(insn_in);
when ONE =>
return '1';
when NONE =>
return '0';
end case;
end;
-- For now, use "rc" in the decode table to decide whether oe exists.
-- This is not entirely correct architecturally: For mulhd and
-- mulhdu, the OE field is reserved. It remains to be seen what an
-- actual POWER9 does if we set it on those instructions, for now we
-- test that further down when assigning to the multiplier oe input.
--
function decode_oe (t : rc_t; insn_in : std_ulogic_vector(31 downto 0)) return std_ulogic is
begin
case t is
when RC =>
return insn_oe(insn_in);
when OTHERS =>
return '0';
end case;
end;
-- issue control signals
signal control_valid_in : std_ulogic;
signal control_valid_out : std_ulogic;
signal control_sgl_pipe : std_logic;
signal gpr_write_valid : std_ulogic;
signal gpr_write : gspr_index_t;
signal gpr_bypassable : std_ulogic;
signal gpr_a_read_valid : std_ulogic;
signal gpr_a_read :gspr_index_t;
signal gpr_a_bypass : std_ulogic;
signal gpr_b_read_valid : std_ulogic;
signal gpr_b_read : gspr_index_t;
signal gpr_b_bypass : std_ulogic;
signal gpr_c_read_valid : std_ulogic;
signal gpr_c_read : gpr_index_t;
signal gpr_c_bypass : std_ulogic;
signal cr_write_valid : std_ulogic;
begin
control_0: entity work.control
generic map (
PIPELINE_DEPTH => 1
)
port map (
clk => clk,
rst => rst,
complete_in => complete_in,
valid_in => control_valid_in,
stall_in => stall_in,
flush_in => flush_in,
sgl_pipe_in => control_sgl_pipe,
stop_mark_in => d_in.stop_mark,
gpr_write_valid_in => gpr_write_valid,
gpr_write_in => gpr_write,
gpr_bypassable => gpr_bypassable,
gpr_a_read_valid_in => gpr_a_read_valid,
gpr_a_read_in => gpr_a_read,
gpr_b_read_valid_in => gpr_b_read_valid,
gpr_b_read_in => gpr_b_read,
gpr_c_read_valid_in => gpr_c_read_valid,
gpr_c_read_in => gpr_c_read,
cr_read_in => d_in.decode.input_cr,
cr_write_in => cr_write_valid,
valid_out => control_valid_out,
stall_out => stall_out,
stopped_out => stopped_out,
gpr_bypass_a => gpr_a_bypass,
gpr_bypass_b => gpr_b_bypass,
gpr_bypass_c => gpr_c_bypass
);
decode2_0: process(clk)
begin
if rising_edge(clk) then
if rin.e.valid = '1' then
report "execute " & to_hstring(rin.e.nia);
end if;
r <= rin;
end if;
end process;
r_out.read1_reg <= gpr_or_spr_to_gspr(insn_ra(d_in.insn), d_in.ispr1);
r_out.read2_reg <= gpr_or_spr_to_gspr(insn_rb(d_in.insn), d_in.ispr2);
r_out.read3_reg <= insn_rs(d_in.insn);
c_out.read <= d_in.decode.input_cr;
decode2_1: process(all)
variable v : reg_type;
variable mul_a : std_ulogic_vector(63 downto 0);
variable mul_b : std_ulogic_vector(63 downto 0);
variable decoded_reg_a : decode_input_reg_t;
variable decoded_reg_b : decode_input_reg_t;
variable decoded_reg_c : decode_input_reg_t;
variable decoded_reg_o : decode_output_reg_t;
variable length : std_ulogic_vector(3 downto 0);
begin
v := r;
v.e := Decode2ToExecute1Init;
mul_a := (others => '0');
mul_b := (others => '0');
--v.e.input_cr := d_in.decode.input_cr;
--v.e.output_cr := d_in.decode.output_cr;
decoded_reg_a := decode_input_reg_a (d_in.decode.input_reg_a, d_in.insn, r_in.read1_data, d_in.ispr1);
decoded_reg_b := decode_input_reg_b (d_in.decode.input_reg_b, d_in.insn, r_in.read2_data, d_in.ispr2);
decoded_reg_c := decode_input_reg_c (d_in.decode.input_reg_c, d_in.insn, r_in.read3_data);
decoded_reg_o := decode_output_reg (d_in.decode.output_reg_a, d_in.insn, d_in.ispr1);
r_out.read1_enable <= decoded_reg_a.reg_valid;
r_out.read2_enable <= decoded_reg_b.reg_valid;
r_out.read3_enable <= decoded_reg_c.reg_valid;
case d_in.decode.length is
when is1B =>
length := "0001";
when is2B =>
length := "0010";
when is4B =>
length := "0100";
when is8B =>
length := "1000";
when NONE =>
length := "0000";
end case;
-- execute unit
v.e.nia := d_in.nia;
v.e.unit := d_in.decode.unit;
v.e.insn_type := d_in.decode.insn_type;
v.e.read_reg1 := decoded_reg_a.reg;
v.e.read_data1 := decoded_reg_a.data;
v.e.bypass_data1 := gpr_a_bypass;
v.e.read_reg2 := decoded_reg_b.reg;
v.e.read_data2 := decoded_reg_b.data;
v.e.bypass_data2 := gpr_b_bypass;
v.e.read_data3 := decoded_reg_c.data;
v.e.bypass_data3 := gpr_c_bypass;
v.e.write_reg := decoded_reg_o.reg;
v.e.rc := decode_rc(d_in.decode.rc, d_in.insn);
if not (d_in.decode.insn_type = OP_MUL_H32 or d_in.decode.insn_type = OP_MUL_H64) then
v.e.oe := decode_oe(d_in.decode.rc, d_in.insn);
end if;
v.e.cr := c_in.read_cr_data;
v.e.xerc := c_in.read_xerc_data;
v.e.invert_a := d_in.decode.invert_a;
v.e.invert_out := d_in.decode.invert_out;
v.e.input_carry := d_in.decode.input_carry;
v.e.output_carry := d_in.decode.output_carry;
v.e.is_32bit := d_in.decode.is_32bit;
v.e.is_signed := d_in.decode.is_signed;
if d_in.decode.lr = '1' then
v.e.lr := insn_lk(d_in.insn);
end if;
v.e.insn := d_in.insn;
v.e.data_len := length;
v.e.byte_reverse := d_in.decode.byte_reverse;
v.e.sign_extend := d_in.decode.sign_extend;
v.e.update := d_in.decode.update;
v.e.reserve := d_in.decode.reserve;
-- issue control
control_valid_in <= d_in.valid;
control_sgl_pipe <= d_in.decode.sgl_pipe;
gpr_write_valid <= decoded_reg_o.reg_valid;
gpr_write <= decoded_reg_o.reg;
gpr_bypassable <= '0';
if EX1_BYPASS and d_in.decode.unit = ALU then
gpr_bypassable <= '1';
end if;
gpr_a_read_valid <= decoded_reg_a.reg_valid;
gpr_a_read <= decoded_reg_a.reg;
gpr_b_read_valid <= decoded_reg_b.reg_valid;
gpr_b_read <= decoded_reg_b.reg;
gpr_c_read_valid <= decoded_reg_c.reg_valid;
gpr_c_read <= gspr_to_gpr(decoded_reg_c.reg);
cr_write_valid <= d_in.decode.output_cr or decode_rc(d_in.decode.rc, d_in.insn);
v.e.valid := control_valid_out;
if d_in.decode.unit = NONE then
v.e.insn_type := OP_ILLEGAL;
end if;
if rst = '1' then
v.e := Decode2ToExecute1Init;
end if;
-- Update registers
rin <= v;
-- Update outputs
e_out <= r.e;
end process;
end architecture behaviour;