You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
108 lines
2.7 KiB
Markdown
108 lines
2.7 KiB
Markdown
<p align="center">
|
|
<img src="media/microwatt-title.png" alt="Microwatt">
|
|
</p>
|
|
|
|
# Microwatt
|
|
|
|
A tiny Open POWER ISA softcore written in VHDL 2008. It aims to be simple and easy
|
|
to understand.
|
|
|
|
## Simulation using ghdl
|
|
<p align="center">
|
|
<img src="http://neuling.org/microwatt-micropython.gif" alt="MicroPython running on Microwatt"/>
|
|
</p>
|
|
|
|
You can try out Microwatt/Micropython without hardware by using the ghdl simulator. If you want to build directly for a hardware target board, see below.
|
|
|
|
- Build micropython. If you aren't building on a ppc64le box you
|
|
will need a cross compiler. If it isn't available on your distro
|
|
grab the powerpc64le-power8 toolchain from https://toolchains.bootlin.com
|
|
|
|
```
|
|
git clone https://github.com/micropython/micropython.git
|
|
cd micropython
|
|
cd ports/powerpc
|
|
make -j$(nproc)
|
|
cd ../../../
|
|
```
|
|
|
|
- Microwatt uses ghdl for simulation. Either install this from your
|
|
distro or build it. Next build microwatt:
|
|
|
|
```
|
|
git clone https://github.com/antonblanchard/microwatt
|
|
cd microwatt
|
|
make
|
|
```
|
|
|
|
- Link in the micropython image:
|
|
|
|
```
|
|
ln -s ../micropython/ports/powerpc/build/firmware.bin main_ram.bin
|
|
```
|
|
|
|
- Now run microwatt, sending debug output to /dev/null:
|
|
|
|
```
|
|
./core_tb > /dev/null
|
|
```
|
|
|
|
## Synthesis on Xilinx FPGAs using Vivado
|
|
|
|
- Install Vivado (I'm using the free 2019.1 webpack edition).
|
|
|
|
- Setup Vivado paths:
|
|
|
|
```
|
|
source /opt/Xilinx/Vivado/2019.1/settings64.sh
|
|
```
|
|
|
|
- Install FuseSoC:
|
|
|
|
```
|
|
pip3 install --user -U fusesoc
|
|
```
|
|
Fedora users can get FuseSoC package via
|
|
```
|
|
sudo dnf copr enable sharkcz/danny
|
|
sudo dnf install fusesoc
|
|
```
|
|
|
|
- Create a working directory and point FuseSoC at microwatt:
|
|
|
|
```
|
|
mkdir microwatt-fusesoc
|
|
cd microwatt-fusesoc
|
|
fusesoc library add microwatt /path/to/microwatt/
|
|
```
|
|
|
|
- Build using FuseSoC. For hello world (Replace nexys_video with your FPGA board such as --target=arty_a7-100):
|
|
|
|
```
|
|
fusesoc run --target=nexys_video microwatt --memory_size=8192 --ram_init_file=/path/to/microwatt/fpga/hello_world.hex
|
|
```
|
|
You should then be able to see output via the serial port of the board (/dev/ttyUSB1, 115200 for example assuming standard clock speeds). There is a know bug where initial output may not be sent - try the reset (not programming button on your board if you don't see anything.
|
|
|
|
- To build micropython (currently requires 1MB of BRAM eg an Artix-7 A200):
|
|
|
|
```
|
|
fusesoc run --target=nexys_video microwatt
|
|
```
|
|
|
|
## Testing
|
|
|
|
- A simple test suite containing random execution test cases and a couple of
|
|
micropython test cases can be run with:
|
|
|
|
```
|
|
make -j$(nproc) check
|
|
```
|
|
|
|
## Issues
|
|
|
|
This is functional, but very simple. We still have quite a lot to do:
|
|
|
|
- There are a few instructions still to be implemented
|
|
- Need to add caches and bypassing (in progress)
|
|
- Need to add supervisor state (in progress)
|