The purpose of this design is to enable the AC922 to accept a DC-SCM v1.0 hardware management module. This enables AC922 as a development platform for DC-SCM development and test.
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
Todd Rosedahl 0393dba7b1 This was a very old and incorrect pinout 2 years ago
3D Design clean, reviewed, and issued to Fab at JLCPCB. 3 years ago
ac922interposer.pretty Design clean, reviewed, and issued to Fab at JLCPCB. 3 years ago
kicad-TI_TPS7A100 first schematic review and first routing 3 years ago
kicad-TI_TPS3801 Design clean, reviewed, and issued to Fab at JLCPCB. 3 years ago
kicad-molex-impact initial schematic 3 years ago
.gitignore Initial commit 3 years ago
DCSCI.sch initial schematic 3 years ago
I3CStrapping.sch initial schematic 3 years ago
LICENSE Merge branch 'main' of github.com:robers97/ac922interposer into main 3 years ago
README.md Updated README 3 years ago
SequoiaConnector.sch Removed extra junctions that were shorting 2.5v to gnd. 3 years ago
ac922interposer-cache.lib initial schematic 3 years ago
ac922interposer.dcm initial schematic 3 years ago
ac922interposer.kicad_pcb Update some routes. Perhaps some schematic. 3 years ago
ac922interposer.lib initial schematic 3 years ago
ac922interposer.pro Update some routes. Perhaps some schematic. 3 years ago
ac922interposer.sch initial schematic 3 years ago
bom2grouped_csv_jlcpcb.xsl Design clean, reviewed, and issued to Fab at JLCPCB. 3 years ago
boxelder.txt Correct 240pin for BMC card (aka Boxelder) 2 years ago
fp-lib-table initial schematic 3 years ago

README.md

ac922interposer

The purpose of this design is to enable the AC922 to accept a DC-SCM v1.0 hardware management module. This enables a developement platform for software development.

For connection with a DC-SCM, the DC-SCM v1.0 release design specifies the connector as an SFF-TA-1002 compliant 4C+ connector. The 4C+ connector is a 4C compliant connector with an additional 28-pin “OCP bay” defined in the OCP NIC 3.0 specification. The right-angled variety allows for the DC-SCM to lay within the BMC cage assembly. This can be implemented with TE 2336568-1.

References:

DC-SCM 0.95 Draft Specification: https://www.opencompute.org/documents/ocp-dc-scm-spec-rev-0-95-pdf

DC-SCM 2.0 Draft Specification: https://drive.google.com/file/d/1UkFgAFKh8qz4mAXdvodYsW0fg8XhyVf2/view?usp=sharing

AC922 Specification: see OpenPower website

SFF-TA-1002 Protocol Agnostic Multi-Lane High Speed Connector https://members.snia.org/document/dl/27231

AntMicro Design Specification: https://github.com/antmicro/artix-dc-scm.git