pp_uart: reformat

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
jtag-port
Benjamin Herrenschmidt 5 years ago
parent 9620a76281
commit 559b3bcf2d

@ -34,351 +34,353 @@ use ieee.numeric_std.all;
--! - Bit 0: data received (receive buffer not empty) --! - Bit 0: data received (receive buffer not empty)
--! - Bit 1: ready to send data (transmit buffer empty) --! - Bit 1: ready to send data (transmit buffer empty)
entity pp_soc_uart is entity pp_soc_uart is
generic( generic(
FIFO_DEPTH : natural := 64 --! Depth of the input and output FIFOs. FIFO_DEPTH : natural := 64 --! Depth of the input and output FIFOs.
); );
port( port(
clk : in std_logic; clk : in std_logic;
reset : in std_logic; reset : in std_logic;


-- UART ports: -- UART ports:
txd : out std_logic; txd : out std_logic;
rxd : in std_logic; rxd : in std_logic;


-- Interrupt signal: -- Interrupt signal:
irq : out std_logic; irq : out std_logic;


-- Wishbone ports: -- Wishbone ports:
wb_adr_in : in std_logic_vector(11 downto 0); wb_adr_in : in std_logic_vector(11 downto 0);
wb_dat_in : in std_logic_vector( 7 downto 0); wb_dat_in : in std_logic_vector( 7 downto 0);
wb_dat_out : out std_logic_vector( 7 downto 0); wb_dat_out : out std_logic_vector( 7 downto 0);
wb_we_in : in std_logic; wb_we_in : in std_logic;
wb_cyc_in : in std_logic; wb_cyc_in : in std_logic;
wb_stb_in : in std_logic; wb_stb_in : in std_logic;
wb_ack_out : out std_logic wb_ack_out : out std_logic
); );
end entity pp_soc_uart; end entity pp_soc_uart;


architecture behaviour of pp_soc_uart is architecture behaviour of pp_soc_uart is


subtype bitnumber is natural range 0 to 7; --! Type representing the index of a bit. subtype bitnumber is natural range 0 to 7; --! Type representing the index of a bit.


-- UART sample clock signals: -- UART sample clock signals:
signal sample_clk : std_logic; signal sample_clk : std_logic;
signal sample_clk_divisor : std_logic_vector(7 downto 0); signal sample_clk_divisor : std_logic_vector(7 downto 0);
signal sample_clk_counter : std_logic_vector(sample_clk_divisor'range); signal sample_clk_counter : std_logic_vector(sample_clk_divisor'range);


-- UART receive process signals: -- UART receive process signals:
type rx_state_type is (IDLE, RECEIVE, STARTBIT, STOPBIT); type rx_state_type is (IDLE, RECEIVE, STARTBIT, STOPBIT);
signal rx_state : rx_state_type; signal rx_state : rx_state_type;
signal rx_byte : std_logic_vector(7 downto 0); signal rx_byte : std_logic_vector(7 downto 0);
signal rx_current_bit : bitnumber; signal rx_current_bit : bitnumber;


subtype rx_sample_counter_type is natural range 0 to 15; subtype rx_sample_counter_type is natural range 0 to 15;
signal rx_sample_counter : rx_sample_counter_type; signal rx_sample_counter : rx_sample_counter_type;
signal rx_sample_value : rx_sample_counter_type; signal rx_sample_value : rx_sample_counter_type;


subtype rx_sample_delay_type is natural range 0 to 7; subtype rx_sample_delay_type is natural range 0 to 7;
signal rx_sample_delay : rx_sample_delay_type; signal rx_sample_delay : rx_sample_delay_type;


-- UART transmit process signals: -- UART transmit process signals:
type tx_state_type is (IDLE, TRANSMIT, STOPBIT); type tx_state_type is (IDLE, TRANSMIT, STOPBIT);
signal tx_state : tx_state_type; signal tx_state : tx_state_type;
signal tx_byte : std_logic_vector(7 downto 0); signal tx_byte : std_logic_vector(7 downto 0);
signal tx_current_bit : bitnumber; signal tx_current_bit : bitnumber;


-- UART transmit clock: -- UART transmit clock:
subtype uart_tx_counter_type is natural range 0 to 15; subtype uart_tx_counter_type is natural range 0 to 15;
signal uart_tx_counter : uart_tx_counter_type := 0; signal uart_tx_counter : uart_tx_counter_type := 0;
signal uart_tx_clk : std_logic; signal uart_tx_clk : std_logic;


-- Buffer signals: -- Buffer signals:
signal send_buffer_full, send_buffer_empty : std_logic; signal send_buffer_full, send_buffer_empty : std_logic;
signal recv_buffer_full, recv_buffer_empty : std_logic; signal recv_buffer_full, recv_buffer_empty : std_logic;
signal send_buffer_input, send_buffer_output : std_logic_vector(7 downto 0); signal send_buffer_input, send_buffer_output : std_logic_vector(7 downto 0);
signal recv_buffer_input, recv_buffer_output : std_logic_vector(7 downto 0); signal recv_buffer_input, recv_buffer_output : std_logic_vector(7 downto 0);
signal send_buffer_push, send_buffer_pop : std_logic := '0'; signal send_buffer_push, send_buffer_pop : std_logic := '0';
signal recv_buffer_push, recv_buffer_pop : std_logic := '0'; signal recv_buffer_push, recv_buffer_pop : std_logic := '0';


-- IRQ enable signals: -- IRQ enable signals:
signal irq_recv_enable, irq_tx_ready_enable : std_logic := '0'; signal irq_recv_enable, irq_tx_ready_enable : std_logic := '0';


-- Wishbone signals: -- Wishbone signals:
type wb_state_type is (IDLE, WRITE_ACK, READ_ACK); type wb_state_type is (IDLE, WRITE_ACK, READ_ACK);
signal wb_state : wb_state_type; signal wb_state : wb_state_type;


signal wb_ack : std_logic; --! Wishbone acknowledge signal signal wb_ack : std_logic; --! Wishbone acknowledge signal


begin begin


irq <= (irq_recv_enable and (not recv_buffer_empty)) irq <= (irq_recv_enable and (not recv_buffer_empty))
or (irq_tx_ready_enable and send_buffer_empty); or (irq_tx_ready_enable and send_buffer_empty);


---------- UART receive ---------- ---------- UART receive ----------


recv_buffer_input <= rx_byte; recv_buffer_input <= rx_byte;


uart_receive: process(clk) uart_receive: process(clk)
begin begin
if rising_edge(clk) then if rising_edge(clk) then
if reset = '1' then if reset = '1' then
rx_state <= IDLE; rx_state <= IDLE;
recv_buffer_push <= '0'; recv_buffer_push <= '0';
else
case rx_state is
when IDLE =>
if recv_buffer_push = '1' then
recv_buffer_push <= '0';
end if;

if sample_clk = '1' and rxd = '0' then
rx_sample_value <= rx_sample_counter;
rx_sample_delay <= 0;
rx_current_bit <= 0;
rx_state <= STARTBIT;
end if;
when STARTBIT =>
if sample_clk = '1' then
if rx_sample_delay = 7 then
rx_state <= RECEIVE;
rx_sample_value <= rx_sample_counter;
rx_sample_delay <= 0;
else else
case rx_state is rx_sample_delay <= rx_sample_delay + 1;
when IDLE =>
if recv_buffer_push = '1' then
recv_buffer_push <= '0';
end if;

if sample_clk = '1' and rxd = '0' then
rx_sample_value <= rx_sample_counter;
rx_sample_delay <= 0;
rx_current_bit <= 0;
rx_state <= STARTBIT;
end if;
when STARTBIT =>
if sample_clk = '1' then
if rx_sample_delay = 7 then
rx_state <= RECEIVE;
rx_sample_value <= rx_sample_counter;
rx_sample_delay <= 0;
else
rx_sample_delay <= rx_sample_delay + 1;
end if;
end if;
when RECEIVE =>
if sample_clk = '1' and rx_sample_counter = rx_sample_value then
if rx_current_bit /= 7 then
rx_byte(rx_current_bit) <= rxd;
rx_current_bit <= rx_current_bit + 1;
else
rx_byte(rx_current_bit) <= rxd;
rx_state <= STOPBIT;
end if;
end if;
when STOPBIT =>
if sample_clk = '1' and rx_sample_counter = rx_sample_value then
rx_state <= IDLE;

if recv_buffer_full = '0' then
recv_buffer_push <= '1';
end if;
end if;
end case;
end if; end if;
end if; end if;
end process uart_receive; when RECEIVE =>

if sample_clk = '1' and rx_sample_counter = rx_sample_value then
sample_counter: process(clk) if rx_current_bit /= 7 then
begin rx_byte(rx_current_bit) <= rxd;
if rising_edge(clk) then rx_current_bit <= rx_current_bit + 1;
if reset = '1' then else
rx_sample_counter <= 0; rx_byte(rx_current_bit) <= rxd;
elsif sample_clk = '1' then rx_state <= STOPBIT;
if rx_sample_counter = 15 then
rx_sample_counter <= 0;
else
rx_sample_counter <= rx_sample_counter + 1;
end if;
end if; end if;
end if; end if;
end process sample_counter; when STOPBIT =>

if sample_clk = '1' and rx_sample_counter = rx_sample_value then
---------- UART transmit ---------- rx_state <= IDLE;


tx_byte <= send_buffer_output; if recv_buffer_full = '0' then

recv_buffer_push <= '1';
uart_transmit: process(clk)
begin
if rising_edge(clk) then
if reset = '1' then
txd <= '1';
tx_state <= IDLE;
send_buffer_pop <= '0';
tx_current_bit <= 0;
else
case tx_state is
when IDLE =>
if send_buffer_empty = '0' and uart_tx_clk = '1' then
txd <= '0';
send_buffer_pop <= '1';
tx_current_bit <= 0;
tx_state <= TRANSMIT;
elsif uart_tx_clk = '1' then
txd <= '1';
end if;
when TRANSMIT =>
if send_buffer_pop = '1' then
send_buffer_pop <= '0';
elsif uart_tx_clk = '1' and tx_current_bit = 7 then
txd <= tx_byte(tx_current_bit);
tx_state <= STOPBIT;
elsif uart_tx_clk = '1' then
txd <= tx_byte(tx_current_bit);
tx_current_bit <= tx_current_bit + 1;
end if;
when STOPBIT =>
if uart_tx_clk = '1' then
txd <= '1';
tx_state <= IDLE;
end if;
end case;
end if; end if;
end if;
end case;
end if;
end if;
end process uart_receive;

sample_counter: process(clk)
begin
if rising_edge(clk) then
if reset = '1' then
rx_sample_counter <= 0;
elsif sample_clk = '1' then
if rx_sample_counter = 15 then
rx_sample_counter <= 0;
else
rx_sample_counter <= rx_sample_counter + 1;
end if; end if;
end process uart_transmit; end if;

end if;
uart_tx_clock_generator: process(clk) end process sample_counter;
begin
if rising_edge(clk) then ---------- UART transmit ----------
if reset = '1' then
uart_tx_counter <= 0; tx_byte <= send_buffer_output;
uart_tx_clk <= '0';
else uart_transmit: process(clk)
if sample_clk = '1' then begin
if uart_tx_counter = 15 then if rising_edge(clk) then
uart_tx_counter <= 0; if reset = '1' then
uart_tx_clk <= '1'; txd <= '1';
else tx_state <= IDLE;
uart_tx_counter <= uart_tx_counter + 1; send_buffer_pop <= '0';
uart_tx_clk <= '0'; tx_current_bit <= 0;
end if; else
else case tx_state is
uart_tx_clk <= '0'; when IDLE =>
end if; if send_buffer_empty = '0' and uart_tx_clk = '1' then
end if; txd <= '0';
send_buffer_pop <= '1';
tx_current_bit <= 0;
tx_state <= TRANSMIT;
elsif uart_tx_clk = '1' then
txd <= '1';
end if;
when TRANSMIT =>
if send_buffer_pop = '1' then
send_buffer_pop <= '0';
elsif uart_tx_clk = '1' and tx_current_bit = 7 then
txd <= tx_byte(tx_current_bit);
tx_state <= STOPBIT;
elsif uart_tx_clk = '1' then
txd <= tx_byte(tx_current_bit);
tx_current_bit <= tx_current_bit + 1;
end if;
when STOPBIT =>
if uart_tx_clk = '1' then
txd <= '1';
tx_state <= IDLE;
end if;
end case;
end if;
end if;
end process uart_transmit;

uart_tx_clock_generator: process(clk)
begin
if rising_edge(clk) then
if reset = '1' then
uart_tx_counter <= 0;
uart_tx_clk <= '0';
else
if sample_clk = '1' then
if uart_tx_counter = 15 then
uart_tx_counter <= 0;
uart_tx_clk <= '1';
else
uart_tx_counter <= uart_tx_counter + 1;
uart_tx_clk <= '0';
end if;
else
uart_tx_clk <= '0';
end if; end if;
end process uart_tx_clock_generator; end if;

end if;
---------- Sample clock generator ---------- end process uart_tx_clock_generator;


sample_clock_generator: process(clk) ---------- Sample clock generator ----------
begin
if rising_edge(clk) then sample_clock_generator: process(clk)
if reset = '1' then begin
sample_clk_counter <= (others => '0'); if rising_edge(clk) then
sample_clk <= '0'; if reset = '1' then
else sample_clk_counter <= (others => '0');
if sample_clk_divisor /= x"00" then sample_clk <= '0';
if sample_clk_counter = sample_clk_divisor then else
sample_clk_counter <= (others => '0'); if sample_clk_divisor /= x"00" then
sample_clk <= '1'; if sample_clk_counter = sample_clk_divisor then
else sample_clk_counter <= (others => '0');
sample_clk_counter <= std_logic_vector(unsigned(sample_clk_counter) + 1); sample_clk <= '1';
sample_clk <= '0'; else
end if; sample_clk_counter <= std_logic_vector(unsigned(sample_clk_counter) + 1);
end if; sample_clk <= '0';
end if; end if;
end if; end if;
end process sample_clock_generator; end if;

end if;
---------- Data Buffers ---------- end process sample_clock_generator;


send_buffer: entity work.pp_fifo ---------- Data Buffers ----------
generic map(
DEPTH => FIFO_DEPTH, send_buffer: entity work.pp_fifo
WIDTH => 8 generic map(
) port map( DEPTH => FIFO_DEPTH,
clk => clk, WIDTH => 8
reset => reset, ) port map(
full => send_buffer_full, clk => clk,
empty => send_buffer_empty, reset => reset,
data_in => send_buffer_input, full => send_buffer_full,
data_out => send_buffer_output, empty => send_buffer_empty,
push => send_buffer_push, data_in => send_buffer_input,
pop => send_buffer_pop data_out => send_buffer_output,
push => send_buffer_push,
pop => send_buffer_pop
); );


recv_buffer: entity work.pp_fifo recv_buffer: entity work.pp_fifo
generic map( generic map(
DEPTH => FIFO_DEPTH, DEPTH => FIFO_DEPTH,
WIDTH => 8 WIDTH => 8
) port map( ) port map(
clk => clk, clk => clk,
reset => reset, reset => reset,
full => recv_buffer_full, full => recv_buffer_full,
empty => recv_buffer_empty, empty => recv_buffer_empty,
data_in => recv_buffer_input, data_in => recv_buffer_input,
data_out => recv_buffer_output, data_out => recv_buffer_output,
push => recv_buffer_push, push => recv_buffer_push,
pop => recv_buffer_pop pop => recv_buffer_pop
); );


---------- Wishbone Interface ---------- ---------- Wishbone Interface ----------


wb_ack_out <= wb_ack and wb_cyc_in and wb_stb_in; wb_ack_out <= wb_ack and wb_cyc_in and wb_stb_in;


wishbone: process(clk) wishbone: process(clk)
begin begin
if rising_edge(clk) then if rising_edge(clk) then
if reset = '1' then if reset = '1' then
wb_ack <= '0'; wb_ack <= '0';
wb_state <= IDLE; wb_state <= IDLE;
send_buffer_push <= '0'; send_buffer_push <= '0';
recv_buffer_pop <= '0'; recv_buffer_pop <= '0';
sample_clk_divisor <= (others => '0'); sample_clk_divisor <= (others => '0');
irq_recv_enable <= '0'; irq_recv_enable <= '0';
irq_tx_ready_enable <= '0'; irq_tx_ready_enable <= '0';
else else
case wb_state is case wb_state is
when IDLE => when IDLE =>
if wb_cyc_in = '1' and wb_stb_in = '1' then if wb_cyc_in = '1' and wb_stb_in = '1' then
if wb_we_in = '1' then -- Write to register if wb_we_in = '1' then -- Write to register
if wb_adr_in = x"000" then if wb_adr_in = x"000" then
send_buffer_input <= wb_dat_in; send_buffer_input <= wb_dat_in;
send_buffer_push <= '1'; send_buffer_push <= '1';
elsif wb_adr_in = x"018" then elsif wb_adr_in = x"018" then
sample_clk_divisor <= wb_dat_in; sample_clk_divisor <= wb_dat_in;
elsif wb_adr_in = x"020" then elsif wb_adr_in = x"020" then
irq_recv_enable <= wb_dat_in(0); irq_recv_enable <= wb_dat_in(0);
irq_tx_ready_enable <= wb_dat_in(1); irq_tx_ready_enable <= wb_dat_in(1);
end if; end if;


-- Invalid writes are acked and ignored. -- Invalid writes are acked and ignored.

wb_ack <= '1';
wb_ack <= '1'; wb_state <= WRITE_ACK;
wb_state <= WRITE_ACK; else -- Read from register
else -- Read from register if wb_adr_in = x"008" then
if wb_adr_in = x"008" then recv_buffer_pop <= '1';
recv_buffer_pop <= '1'; elsif wb_adr_in = x"010" then
elsif wb_adr_in = x"010" then wb_dat_out <= x"0" & send_buffer_full & recv_buffer_full &
wb_dat_out <= x"0" & send_buffer_full & recv_buffer_full & send_buffer_empty & recv_buffer_empty; send_buffer_empty & recv_buffer_empty;
wb_ack <= '1'; wb_ack <= '1';
elsif wb_adr_in = x"018" then elsif wb_adr_in = x"018" then
wb_dat_out <= sample_clk_divisor; wb_dat_out <= sample_clk_divisor;
wb_ack <= '1'; wb_ack <= '1';
elsif wb_adr_in = x"020" then elsif wb_adr_in = x"020" then
wb_dat_out <= (0 => irq_recv_enable, 1 => irq_tx_ready_enable, others => '0'); wb_dat_out <= (0 => irq_recv_enable,
wb_ack <= '1'; 1 => irq_tx_ready_enable,
else others => '0');
wb_dat_out <= (others => '0'); wb_ack <= '1';
wb_ack <= '1'; else
end if; wb_dat_out <= (others => '0');
wb_state <= READ_ACK; wb_ack <= '1';
end if; end if;
end if; wb_state <= READ_ACK;
when WRITE_ACK =>
send_buffer_push <= '0';

if wb_stb_in = '0' then
wb_ack <= '0';
wb_state <= IDLE;
end if;
when READ_ACK =>
if recv_buffer_pop = '1' then
recv_buffer_pop <= '0';
else
wb_dat_out <= recv_buffer_output;
wb_ack <= '1';
end if;

if wb_stb_in = '0' then
wb_ack <= '0';
wb_state <= IDLE;
end if;
end case;
end if; end if;
end if; end if;
end process wishbone; when WRITE_ACK =>
send_buffer_push <= '0';

if wb_stb_in = '0' then
wb_ack <= '0';
wb_state <= IDLE;
end if;
when READ_ACK =>
if recv_buffer_pop = '1' then
recv_buffer_pop <= '0';
else
wb_dat_out <= recv_buffer_output;
wb_ack <= '1';
end if;

if wb_stb_in = '0' then
wb_ack <= '0';
wb_state <= IDLE;
end if;
end case;
end if;
end if;
end process wishbone;


end architecture behaviour; end architecture behaviour;

Loading…
Cancel
Save