matthew1kalasky3
/
microwatt
forked from cores/microwatt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

soc: Rework interconnect

Browse Source 
This changes the SoC interconnect such that the main 64-bit wishbone out
of the processor is first split between only 3 slaves (BRAM, DRAM and a
general "IO" bus) instead of all the slaves in the SoC.

The IO bus leg is then latched and down-converted to 32 bits data width,
before going through a second address decoder for the various IO devices.

This significantly reduces routing and timing pressure on the main bus,
allowing to get rid of frequent timing violations when synthetizing on
small'ish FPGAs such as the Artix-7 35T found on the original Arty board.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
jtag-port
Benjamin Herrenschmidt 5 years ago
parent 8d64090a68
commit 573b6b4bc4
20 changed files with 702 additions and 378 deletions
Show Stats Download Patch File Download Diff File

9
core_tb.vhdl
Unescape Escape View File

@ -18,6 +18,8 @@ architecture behave of core_tb is
-- Dummy DRAM -- Dummy DRAM
signal wb_dram_in : wishbone_master_out; signal wb_dram_in : wishbone_master_out;
signal wb_dram_out : wishbone_slave_out; signal wb_dram_out : wishbone_slave_out;
signal wb_dram_ctrl_in : wb_io_master_out;
signal wb_dram_ctrl_out : wb_io_slave_out;
begin begin


soc0: entity work.soc soc0: entity work.soc
@ -35,6 +37,8 @@ begin
uart0_txd => open, uart0_txd => open,
wb_dram_in => wb_dram_in, wb_dram_in => wb_dram_in,
wb_dram_out => wb_dram_out, wb_dram_out => wb_dram_out,
wb_dram_ctrl_in => wb_dram_ctrl_in,
wb_dram_ctrl_out => wb_dram_ctrl_out,
alt_reset => '0' alt_reset => '0'
); );


@ -59,6 +63,9 @@ begin
-- Dummy DRAM -- Dummy DRAM
wb_dram_out.ack <= wb_dram_in.cyc and wb_dram_in.stb; wb_dram_out.ack <= wb_dram_in.cyc and wb_dram_in.stb;
wb_dram_out.dat <= x"FFFFFFFFFFFFFFFF"; wb_dram_out.dat <= x"FFFFFFFFFFFFFFFF";
wb_dram_out.stall <= wb_dram_in.cyc and not wb_dram_out.ack; wb_dram_out.stall <= '0';
wb_dram_ctrl_out.ack <= wb_dram_ctrl_in.cyc and wb_dram_ctrl_in.stb;
wb_dram_ctrl_out.dat <= x"FFFFFFFF";
wb_dram_ctrl_out.stall <= '0';


end; end;

26
fpga/top-arty.vhdl
Unescape Escape View File

@ -65,11 +65,15 @@ architecture behaviour of toplevel is
signal system_clk : std_ulogic; signal system_clk : std_ulogic;
signal system_clk_locked : std_ulogic; signal system_clk_locked : std_ulogic;


-- DRAM wishbone connection -- DRAM main data wishbone connection
signal wb_dram_in : wishbone_master_out; signal wb_dram_in : wishbone_master_out;
signal wb_dram_out : wishbone_slave_out; signal wb_dram_out : wishbone_slave_out;
signal wb_dram_ctrl : std_ulogic;
signal wb_dram_init : std_ulogic; -- DRAM control wishbone connection
signal wb_dram_ctrl_in : wb_io_master_out;
signal wb_dram_ctrl_out : wb_io_slave_out;
signal wb_dram_is_csr : std_ulogic;
signal wb_dram_is_init : std_ulogic;


-- Control/status -- Control/status
signal core_alt_reset : std_ulogic; signal core_alt_reset : std_ulogic;
@ -104,8 +108,10 @@ begin
uart0_rxd => uart_main_rx, uart0_rxd => uart_main_rx,
wb_dram_in => wb_dram_in, wb_dram_in => wb_dram_in,
wb_dram_out => wb_dram_out, wb_dram_out => wb_dram_out,
wb_dram_ctrl => wb_dram_ctrl, wb_dram_ctrl_in => wb_dram_ctrl_in,
wb_dram_init => wb_dram_init, wb_dram_ctrl_out => wb_dram_ctrl_out,
wb_dram_is_csr => wb_dram_is_csr,
wb_dram_is_init => wb_dram_is_init,
alt_reset => core_alt_reset alt_reset => core_alt_reset
); );


@ -195,8 +201,10 @@ begin


wb_in => wb_dram_in, wb_in => wb_dram_in,
wb_out => wb_dram_out, wb_out => wb_dram_out,
wb_is_ctrl => wb_dram_ctrl, wb_ctrl_in => wb_dram_ctrl_in,
wb_is_init => wb_dram_init, wb_ctrl_out => wb_dram_ctrl_out,
wb_ctrl_is_csr => wb_dram_is_csr,
wb_ctrl_is_init => wb_dram_is_init,


serial_tx => uart_pmod_tx, serial_tx => uart_pmod_tx,
serial_rx => uart_pmod_rx, serial_rx => uart_pmod_rx,

20
fpga/top-generic.vhdl
Unescape Escape View File

@ -33,9 +33,15 @@ architecture behaviour of toplevel is
signal system_clk : std_ulogic; signal system_clk : std_ulogic;
signal system_clk_locked : std_ulogic; signal system_clk_locked : std_ulogic;


-- Dummy DRAM -- DRAM main data wishbone connection
signal wb_dram_in : wishbone_master_out; signal wb_dram_in : wishbone_master_out;
signal wb_dram_out : wishbone_slave_out; signal wb_dram_out : wishbone_slave_out;

-- DRAM control wishbone connection
signal wb_dram_ctrl_in : wb_io_master_out;
signal wb_dram_ctrl_out : wb_io_slave_out;
signal wb_dram_is_csr : std_ulogic;
signal wb_dram_is_init : std_ulogic;


begin begin


@ -79,7 +85,12 @@ begin
rst => soc_rst, rst => soc_rst,
uart0_txd => uart0_txd, uart0_txd => uart0_txd,
uart0_rxd => uart0_rxd, uart0_rxd => uart0_rxd,
wb_dram_in => wb_dram_in,
wb_dram_out => wb_dram_out, wb_dram_out => wb_dram_out,
wb_dram_ctrl_in => wb_dram_ctrl_in,
wb_dram_ctrl_out => wb_dram_ctrl_out,
wb_dram_is_csr => wb_dram_is_csr,
wb_dram_is_init => wb_dram_is_init,
alt_reset => '0' alt_reset => '0'
); );


@ -87,5 +98,8 @@ begin
wb_dram_out.ack <= wb_dram_in.cyc and wb_dram_in.stb; wb_dram_out.ack <= wb_dram_in.cyc and wb_dram_in.stb;
wb_dram_out.dat <= x"FFFFFFFFFFFFFFFF"; wb_dram_out.dat <= x"FFFFFFFFFFFFFFFF";
wb_dram_out.stall <= wb_dram_in.cyc and not wb_dram_out.ack; wb_dram_out.stall <= wb_dram_in.cyc and not wb_dram_out.ack;
wb_dram_ctrl_out.ack <= wb_dram_in.cyc and wb_dram_in.stb;
wb_dram_ctrl_out.dat <= x"FFFFFFFF";
wb_dram_ctrl_out.stall <= wb_dram_in.cyc and not wb_dram_out.ack;


end architecture behaviour; end architecture behaviour;

26
fpga/top-nexys-video.vhdl
Unescape Escape View File

@ -57,11 +57,15 @@ architecture behaviour of toplevel is
signal system_clk : std_ulogic; signal system_clk : std_ulogic;
signal system_clk_locked : std_ulogic; signal system_clk_locked : std_ulogic;


-- DRAM wishbone connection -- DRAM main data wishbone connection
signal wb_dram_in : wishbone_master_out; signal wb_dram_in : wishbone_master_out;
signal wb_dram_out : wishbone_slave_out; signal wb_dram_out : wishbone_slave_out;
signal wb_dram_ctrl : std_ulogic;
signal wb_dram_init : std_ulogic; -- DRAM control wishbone connection
signal wb_dram_ctrl_in : wb_io_master_out;
signal wb_dram_ctrl_out : wb_io_slave_out;
signal wb_dram_is_csr : std_ulogic;
signal wb_dram_is_init : std_ulogic;


-- Control/status -- Control/status
signal core_alt_reset : std_ulogic; signal core_alt_reset : std_ulogic;
@ -87,8 +91,10 @@ begin
uart0_rxd => uart_main_rx, uart0_rxd => uart_main_rx,
wb_dram_in => wb_dram_in, wb_dram_in => wb_dram_in,
wb_dram_out => wb_dram_out, wb_dram_out => wb_dram_out,
wb_dram_ctrl => wb_dram_ctrl, wb_dram_ctrl_in => wb_dram_ctrl_in,
wb_dram_init => wb_dram_init, wb_dram_ctrl_out => wb_dram_ctrl_out,
wb_dram_is_csr => wb_dram_is_csr,
wb_dram_is_init => wb_dram_is_init,
alt_reset => core_alt_reset alt_reset => core_alt_reset
); );


@ -176,8 +182,10 @@ begin


wb_in => wb_dram_in, wb_in => wb_dram_in,
wb_out => wb_dram_out, wb_out => wb_dram_out,
wb_is_ctrl => wb_dram_ctrl, wb_ctrl_in => wb_dram_ctrl_in,
wb_is_init => wb_dram_init, wb_ctrl_out => wb_dram_ctrl_out,
wb_ctrl_is_csr => wb_dram_is_csr,
wb_ctrl_is_init => wb_dram_is_init,


serial_tx => open, serial_tx => open,
serial_rx => '0', serial_rx => '0',

5
include/microwatt_soc.h
Unescape Escape View File

@ -7,12 +7,13 @@


#define MEMORY_BASE 0x00000000 /* "Main" memory alias, either BRAM or DRAM */ #define MEMORY_BASE 0x00000000 /* "Main" memory alias, either BRAM or DRAM */
#define DRAM_BASE 0x40000000 /* DRAM if present */ #define DRAM_BASE 0x40000000 /* DRAM if present */
#define BRAM_BASE 0x80000000 /* Internal BRAM */

#define SYSCON_BASE 0xc0000000 /* System control regs */ #define SYSCON_BASE 0xc0000000 /* System control regs */
#define UART_BASE 0xc0002000 /* UART */ #define UART_BASE 0xc0002000 /* UART */
#define XICS_BASE 0xc0004000 /* Interrupt controller */ #define XICS_BASE 0xc0004000 /* Interrupt controller */
#define DRAM_CTRL_BASE 0xc0100000 /* LiteDRAM control registers */ #define DRAM_CTRL_BASE 0xc0100000 /* LiteDRAM control registers */
#define BRAM_BASE 0xf0000000 /* Internal BRAM */ #define DRAM_INIT_BASE 0xf0000000 /* Internal DRAM init firmware */
#define DRAM_INIT_BASE 0xffff0000 /* Internal DRAM init firmware */


/* /*
* Register definitions for the syscon registers * Register definitions for the syscon registers

2
litedram/gen-src/sdram_init/head.S
Unescape Escape View File

@ -14,7 +14,7 @@
* limitations under the License. * limitations under the License.
*/ */


#define STACK_TOP 0xffff4000 #define STACK_TOP 0xf0004000


#define FIXUP_ENDIAN \ #define FIXUP_ENDIAN \
tdi 0,0,0x48; /* Reverse endian of b . + 8 */ \ tdi 0,0,0x48; /* Reverse endian of b . + 8 */ \

1
litedram/gen-src/sdram_init/sdram_init.lds.S
Unescape Escape View File

@ -8,6 +8,7 @@ SECTIONS
KEEP(*(.head)) KEEP(*(.head))
} }
. = DRAM_INIT_BASE | 0x1000; . = DRAM_INIT_BASE | 0x1000;

.text : { *(.text*) *(.sfpr) *(.rodata*) } .text : { *(.text*) *(.sfpr) *(.rodata*) }
.data : { *(.data*) } .data : { *(.data*) }
.bss : { *(.bss*) } .bss : { *(.bss*) }

129
litedram/gen-src/wrapper-mw-init.vhdl
Unescape Escape View File

@ -15,18 +15,20 @@ entity litedram_wrapper is
port( port(
-- LiteDRAM generates the system clock and reset -- LiteDRAM generates the system clock and reset
-- from the input clkin -- from the input clkin
clk_in : in std_ulogic; clk_in : in std_ulogic;
rst : in std_ulogic; rst : in std_ulogic;
system_clk : out std_ulogic; system_clk : out std_ulogic;
system_reset : out std_ulogic; system_reset : out std_ulogic;
core_alt_reset : out std_ulogic; core_alt_reset : out std_ulogic;
pll_locked : out std_ulogic; pll_locked : out std_ulogic;


-- Wishbone ports: -- Wishbone ports:
wb_in : in wishbone_master_out; wb_in : in wishbone_master_out;
wb_out : out wishbone_slave_out; wb_out : out wishbone_slave_out;
wb_is_ctrl : in std_ulogic; wb_ctrl_in : in wb_io_master_out;
wb_is_init : in std_ulogic; wb_ctrl_out : out wb_io_slave_out;
wb_ctrl_is_csr : in std_ulogic;
wb_ctrl_is_init : in std_ulogic;


-- Init core serial debug -- Init core serial debug
serial_tx : out std_ulogic; serial_tx : out std_ulogic;
@ -128,8 +130,8 @@ architecture behaviour of litedram_wrapper is
signal wb_ctrl_ack : std_ulogic; signal wb_ctrl_ack : std_ulogic;
signal wb_ctrl_we : std_ulogic; signal wb_ctrl_we : std_ulogic;


signal wb_init_in : wishbone_master_out; signal wb_init_in : wb_io_master_out;
signal wb_init_out : wishbone_slave_out; signal wb_init_out : wb_io_slave_out;


type state_t is (CMD, MWRITE, MREAD); type state_t is (CMD, MWRITE, MREAD);
signal state : state_t; signal state : state_t;
@ -138,7 +140,7 @@ architecture behaviour of litedram_wrapper is
constant INIT_RAM_ABITS :integer := 14; constant INIT_RAM_ABITS :integer := 14;
constant INIT_RAM_FILE : string := "litedram_core.init"; constant INIT_RAM_FILE : string := "litedram_core.init";


type ram_t is array(0 to (INIT_RAM_SIZE / 8) - 1) of std_logic_vector(63 downto 0); type ram_t is array(0 to (INIT_RAM_SIZE / 4) - 1) of std_logic_vector(31 downto 0);


impure function init_load_ram(name : string) return ram_t is impure function init_load_ram(name : string) return ram_t is
file ram_file : text open read_mode is name; file ram_file : text open read_mode is name;
@ -150,7 +152,8 @@ architecture behaviour of litedram_wrapper is
exit when endfile(ram_file); exit when endfile(ram_file);
readline(ram_file, ram_line); readline(ram_file, ram_line);
hread(ram_line, temp_word); hread(ram_line, temp_word);
temp_ram(i) := temp_word; temp_ram(i*2) := temp_word(31 downto 0);
temp_ram(i*2+1) := temp_word(63 downto 32);
end loop; end loop;
return temp_ram; return temp_ram;
end function; end function;
@ -162,79 +165,93 @@ architecture behaviour of litedram_wrapper is


begin begin


-- BRAM Memory slave -- alternate core reset address set when DRAM is not initialized.
core_alt_reset <= not init_done;

-- BRAM Memory slave. TODO: Pipeline it with an output buffer
-- to improve timing
init_ram_0: process(system_clk) init_ram_0: process(system_clk)
variable adr : integer; variable adr : integer;
begin begin
if rising_edge(system_clk) then if rising_edge(system_clk) then
wb_init_out.ack <= '0'; wb_init_out.ack <= '0';
if (wb_init_in.cyc and wb_init_in.stb) = '1' then if (wb_init_in.cyc and wb_init_in.stb) = '1' then
adr := to_integer((unsigned(wb_init_in.adr(INIT_RAM_ABITS-1 downto 3)))); adr := to_integer((unsigned(wb_init_in.adr(INIT_RAM_ABITS-1 downto 2))));
if wb_init_in.we = '0' then if wb_init_in.we = '0' then
wb_init_out.dat <= init_ram(adr); wb_init_out.dat <= init_ram(adr);
else else
for i in 0 to 7 loop for i in 0 to 3 loop
if wb_init_in.sel(i) = '1' then if wb_init_in.sel(i) = '1' then
init_ram(adr)(((i + 1) * 8) - 1 downto i * 8) <= init_ram(adr)(((i + 1) * 8) - 1 downto i * 8) <=
wb_init_in.dat(((i + 1) * 8) - 1 downto i * 8); wb_init_in.dat(((i + 1) * 8) - 1 downto i * 8);
end if; end if;
end loop; end loop;
end if; end if;
wb_init_out.ack <= not wb_init_out.ack; wb_init_out.ack <= '1';
end if; end if;
end if; end if;
end process; end process;


wb_init_in.adr <= wb_in.adr; --
wb_init_in.dat <= wb_in.dat; -- Control bus wishbone: This muxes the wishbone to the CSRs
wb_init_in.sel <= wb_in.sel; -- and an internal small one to the init BRAM
wb_init_in.we <= wb_in.we; --
wb_init_in.stb <= wb_in.stb;
wb_init_in.cyc <= wb_in.cyc and wb_is_init; -- Init DRAM wishbone IN signals
wb_init_in.adr <= wb_ctrl_in.adr;
wb_init_in.dat <= wb_ctrl_in.dat;
wb_init_in.sel <= wb_ctrl_in.sel;
wb_init_in.we <= wb_ctrl_in.we;
wb_init_in.stb <= wb_ctrl_in.stb;
wb_init_in.cyc <= wb_ctrl_in.cyc and wb_ctrl_is_init;

-- DRAM CSR IN signals
wb_ctrl_adr <= x"0000" & wb_ctrl_in.adr(15 downto 2);
wb_ctrl_dat_w <= wb_ctrl_in.dat;
wb_ctrl_sel <= wb_ctrl_in.sel;
wb_ctrl_we <= wb_ctrl_in.we;
wb_ctrl_cyc <= wb_ctrl_in.cyc and wb_ctrl_is_csr;
wb_ctrl_stb <= wb_ctrl_in.stb and wb_ctrl_is_csr;


-- Address bit 3 selects the top or bottom half of the data -- Ctrl bus wishbone OUT signals
wb_ctrl_out.ack <= wb_ctrl_ack when wb_ctrl_is_csr = '1'
else wb_init_out.ack;
wb_ctrl_out.dat <= wb_ctrl_dat_r when wb_ctrl_is_csr = '1'
else wb_init_out.dat;
wb_ctrl_out.stall <= wb_init_out.stall when wb_ctrl_is_init else
'0' when wb_ctrl_in.cyc = '0' else not wb_ctrl_ack;

--
-- Data bus wishbone to LiteDRAM native port
--
-- Address bit 3 selects the top or bottom half of the data
-- bus (64-bit wishbone vs. 128-bit DRAM interface) -- bus (64-bit wishbone vs. 128-bit DRAM interface)
-- --
-- XXX TODO: Figure out how to pipeline this
--
ad3 <= wb_in.adr(3); ad3 <= wb_in.adr(3);


-- DRAM data interface signals -- Wishbone port IN signals
user_port0_cmd_valid <= (wb_in.cyc and wb_in.stb and not wb_is_ctrl and not wb_is_init) user_port0_cmd_valid <= wb_in.cyc and wb_in.stb when state = CMD else '0';
when state = CMD else '0'; user_port0_cmd_we <= wb_in.we when state = CMD else '0';
user_port0_cmd_we <= wb_in.we when state = CMD else '0';
user_port0_wdata_valid <= '1' when state = MWRITE else '0'; user_port0_wdata_valid <= '1' when state = MWRITE else '0';
user_port0_rdata_ready <= '1' when state = MREAD else '0'; user_port0_rdata_ready <= '1' when state = MREAD else '0';
user_port0_cmd_addr <= wb_in.adr(DRAM_ABITS+3 downto 4); user_port0_cmd_addr <= wb_in.adr(DRAM_ABITS+3 downto 4);
user_port0_wdata_data <= wb_in.dat & wb_in.dat; user_port0_wdata_data <= wb_in.dat & wb_in.dat;
user_port0_wdata_we <= wb_in.sel & "00000000" when ad3 = '1' else user_port0_wdata_we <= wb_in.sel & "00000000" when ad3 = '1' else
"00000000" & wb_in.sel; "00000000" & wb_in.sel;


-- DRAM ctrl interface signals -- Wishbone OUT signals
wb_ctrl_adr <= x"0000" & wb_in.adr(15 downto 2); wb_out.ack <= user_port0_wdata_ready when state = MWRITE else
wb_ctrl_dat_w <= wb_in.dat(31 downto 0);
wb_ctrl_sel <= wb_in.sel(3 downto 0);
wb_ctrl_cyc <= wb_in.cyc and wb_is_ctrl;
wb_ctrl_stb <= wb_in.stb and wb_is_ctrl;
wb_ctrl_we <= wb_in.we;

-- Wishbone out signals
wb_out.ack <= wb_ctrl_ack when wb_is_ctrl ='1' else
wb_init_out.ack when wb_is_init = '1' else
user_port0_wdata_ready when state = MWRITE else
user_port0_rdata_valid when state = MREAD else '0'; user_port0_rdata_valid when state = MREAD else '0';


wb_out.dat <= (x"00000000" & wb_ctrl_dat_r) when wb_is_ctrl = '1' else wb_out.dat <= user_port0_rdata_data(127 downto 64) when ad3 = '1' else
wb_init_out.dat when wb_is_init = '1' else
user_port0_rdata_data(127 downto 64) when ad3 = '1' else
user_port0_rdata_data(63 downto 0); user_port0_rdata_data(63 downto 0);

-- We don't do pipelining yet. -- We don't do pipelining yet.
wb_out.stall <= '0' when wb_in.cyc = '0' else not wb_out.ack; wb_out.stall <= '0' when wb_in.cyc = '0' else not wb_out.ack;


-- Reset ignored, the reset controller use the pll lock signal, -- DRAM user port State machine
-- and alternate core reset address set when DRAM is not initialized.
--
core_alt_reset <= not init_done;

-- State machine
sm: process(system_clk) sm: process(system_clk)
begin begin
@ -255,7 +272,7 @@ begin
if user_port0_rdata_valid = '1' then if user_port0_rdata_valid = '1' then
state <= CMD; state <= CMD;
end if; end if;
end case; end case;
end if; end if;
end if; end if;
end process; end process;

72
litedram/gen-src/wrapper-self-init.vhdl
Unescape Escape View File

@ -15,18 +15,20 @@ entity litedram_wrapper is
port( port(
-- LiteDRAM generates the system clock and reset -- LiteDRAM generates the system clock and reset
-- from the input clkin -- from the input clkin
clk_in : in std_ulogic; clk_in : in std_ulogic;
rst : in std_ulogic; rst : in std_ulogic;
system_clk : out std_ulogic; system_clk : out std_ulogic;
system_reset : out std_ulogic; system_reset : out std_ulogic;
core_alt_reset : out std_ulogic; core_alt_reset : out std_ulogic;
pll_locked : out std_ulogic; pll_locked : out std_ulogic;


-- Wishbone ports: -- Wishbone ports:
wb_in : in wishbone_master_out; wb_in : in wishbone_master_out;
wb_out : out wishbone_slave_out; wb_out : out wishbone_slave_out;
wb_is_ctrl : in std_ulogic; wb_ctrl_in : in wb_io_master_out;
wb_is_init : in std_ulogic; wb_ctrl_out : out wb_io_slave_out;
wb_ctrl_is_csr : in std_ulogic;
wb_ctrl_is_init : in std_ulogic;


-- Init core serial debug -- Init core serial debug
serial_tx : out std_ulogic; serial_tx : out std_ulogic;
@ -52,7 +54,6 @@ entity litedram_wrapper is
ddram_cke : out std_ulogic; ddram_cke : out std_ulogic;
ddram_odt : out std_ulogic; ddram_odt : out std_ulogic;
ddram_reset_n : out std_ulogic ddram_reset_n : out std_ulogic
);
end entity litedram_wrapper; end entity litedram_wrapper;


architecture behaviour of litedram_wrapper is architecture behaviour of litedram_wrapper is
@ -117,36 +118,47 @@ architecture behaviour of litedram_wrapper is


begin begin


-- Reset, lift it when init done, no alt core reset
system_reset <= dram_user_reset or not init_done;
core_alt_reset <= '0';

-- Control bus is unused
wb_ctrl_out.ack <= (wb_is_ctrl = '1' or wb_is_init = '1') and wb_ctrl_in.cyc;
else wb_init_out.ack;
wb_ctrl_out.dat <= (others => '0');
wb_ctrl_out.stall <= '0';

--
-- Data bus wishbone to LiteDRAM native port
--
-- Address bit 3 selects the top or bottom half of the data -- Address bit 3 selects the top or bottom half of the data
-- bus (64-bit wishbone vs. 128-bit DRAM interface) -- bus (64-bit wishbone vs. 128-bit DRAM interface)
-- --
-- XXX TODO: Figure out how to pipeline this
--
ad3 <= wb_in.adr(3); ad3 <= wb_in.adr(3);


-- DRAM interface signals -- Wishbone port IN signals
user_port0_cmd_valid <= (wb_in.cyc and wb_in.stb and not wb_is_ctrl and not wb_is_init) user_port0_cmd_valid <= wb_in.cyc and wb_in.stb when state = CMD else '0';
when state = CMD else '0'; user_port0_cmd_we <= wb_in.we when state = CMD else '0';
user_port0_cmd_we <= wb_in.we when state = CMD else '0';
user_port0_wdata_valid <= '1' when state = MWRITE else '0'; user_port0_wdata_valid <= '1' when state = MWRITE else '0';
user_port0_rdata_ready <= '1' when state = MREAD else '0'; user_port0_rdata_ready <= '1' when state = MREAD else '0';
user_port0_cmd_addr <= wb_in.adr(DRAM_ABITS+3 downto 4); user_port0_cmd_addr <= wb_in.adr(DRAM_ABITS+3 downto 4);
user_port0_wdata_data <= wb_in.dat & wb_in.dat; user_port0_wdata_data <= wb_in.dat & wb_in.dat;
user_port0_wdata_we <= wb_in.sel & "00000000" when ad3 = '1' else user_port0_wdata_we <= wb_in.sel & "00000000" when ad3 = '1' else
"00000000" & wb_in.sel; "00000000" & wb_in.sel;


-- Wishbone out signals. CSR and init memory do nothing, just ack -- Wishbone OUT signals
wb_out.ack <= '1' when (wb_is_ctrl = '1' or wb_is_init = '1') else wb_out.ack <= user_port0_wdata_ready when state = MWRITE else
user_port0_wdata_ready when state = MWRITE else
user_port0_rdata_valid when state = MREAD else '0'; user_port0_rdata_valid when state = MREAD else '0';
wb_out.dat <= (others => '0') when (wb_is_ctrl = '1' or wb_is_init = '1') else
user_port0_rdata_data(127 downto 64) when ad3 = '1' else wb_out.dat <= user_port0_rdata_data(127 downto 64) when ad3 = '1' else
user_port0_rdata_data(63 downto 0); user_port0_rdata_data(63 downto 0);
wb_out.stall <= '0' when wb_in.cyc = '0' else not wb_out.ack;


-- Reset, lift it when init done, no alt core reset -- We don't do pipelining yet.
system_reset <= dram_user_reset or not init_done; wb_out.stall <= '0' when wb_in.cyc = '0' else not wb_out.ack;
core_alt_reset <= '0';


-- State machine -- DRAM user port State machine
sm: process(system_clk) sm: process(system_clk)
begin begin

129
litedram/generated/arty/litedram-wrapper.vhdl
Unescape Escape View File

@ -15,18 +15,20 @@ entity litedram_wrapper is
port( port(
-- LiteDRAM generates the system clock and reset -- LiteDRAM generates the system clock and reset
-- from the input clkin -- from the input clkin
clk_in : in std_ulogic; clk_in : in std_ulogic;
rst : in std_ulogic; rst : in std_ulogic;
system_clk : out std_ulogic; system_clk : out std_ulogic;
system_reset : out std_ulogic; system_reset : out std_ulogic;
core_alt_reset : out std_ulogic; core_alt_reset : out std_ulogic;
pll_locked : out std_ulogic; pll_locked : out std_ulogic;


-- Wishbone ports: -- Wishbone ports:
wb_in : in wishbone_master_out; wb_in : in wishbone_master_out;
wb_out : out wishbone_slave_out; wb_out : out wishbone_slave_out;
wb_is_ctrl : in std_ulogic; wb_ctrl_in : in wb_io_master_out;
wb_is_init : in std_ulogic; wb_ctrl_out : out wb_io_slave_out;
wb_ctrl_is_csr : in std_ulogic;
wb_ctrl_is_init : in std_ulogic;


-- Init core serial debug -- Init core serial debug
serial_tx : out std_ulogic; serial_tx : out std_ulogic;
@ -128,8 +130,8 @@ architecture behaviour of litedram_wrapper is
signal wb_ctrl_ack : std_ulogic; signal wb_ctrl_ack : std_ulogic;
signal wb_ctrl_we : std_ulogic; signal wb_ctrl_we : std_ulogic;


signal wb_init_in : wishbone_master_out; signal wb_init_in : wb_io_master_out;
signal wb_init_out : wishbone_slave_out; signal wb_init_out : wb_io_slave_out;


type state_t is (CMD, MWRITE, MREAD); type state_t is (CMD, MWRITE, MREAD);
signal state : state_t; signal state : state_t;
@ -138,7 +140,7 @@ architecture behaviour of litedram_wrapper is
constant INIT_RAM_ABITS :integer := 14; constant INIT_RAM_ABITS :integer := 14;
constant INIT_RAM_FILE : string := "litedram_core.init"; constant INIT_RAM_FILE : string := "litedram_core.init";


type ram_t is array(0 to (INIT_RAM_SIZE / 8) - 1) of std_logic_vector(63 downto 0); type ram_t is array(0 to (INIT_RAM_SIZE / 4) - 1) of std_logic_vector(31 downto 0);


impure function init_load_ram(name : string) return ram_t is impure function init_load_ram(name : string) return ram_t is
file ram_file : text open read_mode is name; file ram_file : text open read_mode is name;
@ -150,7 +152,8 @@ architecture behaviour of litedram_wrapper is
exit when endfile(ram_file); exit when endfile(ram_file);
readline(ram_file, ram_line); readline(ram_file, ram_line);
hread(ram_line, temp_word); hread(ram_line, temp_word);
temp_ram(i) := temp_word; temp_ram(i*2) := temp_word(31 downto 0);
temp_ram(i*2+1) := temp_word(63 downto 32);
end loop; end loop;
return temp_ram; return temp_ram;
end function; end function;
@ -162,79 +165,93 @@ architecture behaviour of litedram_wrapper is


begin begin


-- BRAM Memory slave -- alternate core reset address set when DRAM is not initialized.
core_alt_reset <= not init_done;

-- BRAM Memory slave. TODO: Pipeline it with an output buffer
-- to improve timing
init_ram_0: process(system_clk) init_ram_0: process(system_clk)
variable adr : integer; variable adr : integer;
begin begin
if rising_edge(system_clk) then if rising_edge(system_clk) then
wb_init_out.ack <= '0'; wb_init_out.ack <= '0';
if (wb_init_in.cyc and wb_init_in.stb) = '1' then if (wb_init_in.cyc and wb_init_in.stb) = '1' then
adr := to_integer((unsigned(wb_init_in.adr(INIT_RAM_ABITS-1 downto 3)))); adr := to_integer((unsigned(wb_init_in.adr(INIT_RAM_ABITS-1 downto 2))));
if wb_init_in.we = '0' then if wb_init_in.we = '0' then
wb_init_out.dat <= init_ram(adr); wb_init_out.dat <= init_ram(adr);
else else
for i in 0 to 7 loop for i in 0 to 3 loop
if wb_init_in.sel(i) = '1' then if wb_init_in.sel(i) = '1' then
init_ram(adr)(((i + 1) * 8) - 1 downto i * 8) <= init_ram(adr)(((i + 1) * 8) - 1 downto i * 8) <=
wb_init_in.dat(((i + 1) * 8) - 1 downto i * 8); wb_init_in.dat(((i + 1) * 8) - 1 downto i * 8);
end if; end if;
end loop; end loop;
end if; end if;
wb_init_out.ack <= not wb_init_out.ack; wb_init_out.ack <= '1';
end if; end if;
end if; end if;
end process; end process;


wb_init_in.adr <= wb_in.adr; --
wb_init_in.dat <= wb_in.dat; -- Control bus wishbone: This muxes the wishbone to the CSRs
wb_init_in.sel <= wb_in.sel; -- and an internal small one to the init BRAM
wb_init_in.we <= wb_in.we; --
wb_init_in.stb <= wb_in.stb;
wb_init_in.cyc <= wb_in.cyc and wb_is_init; -- Init DRAM wishbone IN signals
wb_init_in.adr <= wb_ctrl_in.adr;
wb_init_in.dat <= wb_ctrl_in.dat;
wb_init_in.sel <= wb_ctrl_in.sel;
wb_init_in.we <= wb_ctrl_in.we;
wb_init_in.stb <= wb_ctrl_in.stb;
wb_init_in.cyc <= wb_ctrl_in.cyc and wb_ctrl_is_init;

-- DRAM CSR IN signals
wb_ctrl_adr <= x"0000" & wb_ctrl_in.adr(15 downto 2);
wb_ctrl_dat_w <= wb_ctrl_in.dat;
wb_ctrl_sel <= wb_ctrl_in.sel;
wb_ctrl_we <= wb_ctrl_in.we;
wb_ctrl_cyc <= wb_ctrl_in.cyc and wb_ctrl_is_csr;
wb_ctrl_stb <= wb_ctrl_in.stb and wb_ctrl_is_csr;


-- Address bit 3 selects the top or bottom half of the data -- Ctrl bus wishbone OUT signals
wb_ctrl_out.ack <= wb_ctrl_ack when wb_ctrl_is_csr = '1'
else wb_init_out.ack;
wb_ctrl_out.dat <= wb_ctrl_dat_r when wb_ctrl_is_csr = '1'
else wb_init_out.dat;
wb_ctrl_out.stall <= wb_init_out.stall when wb_ctrl_is_init else
'0' when wb_ctrl_in.cyc = '0' else not wb_ctrl_ack;

--
-- Data bus wishbone to LiteDRAM native port
--
-- Address bit 3 selects the top or bottom half of the data
-- bus (64-bit wishbone vs. 128-bit DRAM interface) -- bus (64-bit wishbone vs. 128-bit DRAM interface)
-- --
-- XXX TODO: Figure out how to pipeline this
--
ad3 <= wb_in.adr(3); ad3 <= wb_in.adr(3);


-- DRAM data interface signals -- Wishbone port IN signals
user_port0_cmd_valid <= (wb_in.cyc and wb_in.stb and not wb_is_ctrl and not wb_is_init) user_port0_cmd_valid <= wb_in.cyc and wb_in.stb when state = CMD else '0';
when state = CMD else '0'; user_port0_cmd_we <= wb_in.we when state = CMD else '0';
user_port0_cmd_we <= wb_in.we when state = CMD else '0';
user_port0_wdata_valid <= '1' when state = MWRITE else '0'; user_port0_wdata_valid <= '1' when state = MWRITE else '0';
user_port0_rdata_ready <= '1' when state = MREAD else '0'; user_port0_rdata_ready <= '1' when state = MREAD else '0';
user_port0_cmd_addr <= wb_in.adr(DRAM_ABITS+3 downto 4); user_port0_cmd_addr <= wb_in.adr(DRAM_ABITS+3 downto 4);
user_port0_wdata_data <= wb_in.dat & wb_in.dat; user_port0_wdata_data <= wb_in.dat & wb_in.dat;
user_port0_wdata_we <= wb_in.sel & "00000000" when ad3 = '1' else user_port0_wdata_we <= wb_in.sel & "00000000" when ad3 = '1' else
"00000000" & wb_in.sel; "00000000" & wb_in.sel;


-- DRAM ctrl interface signals -- Wishbone OUT signals
wb_ctrl_adr <= x"0000" & wb_in.adr(15 downto 2); wb_out.ack <= user_port0_wdata_ready when state = MWRITE else
wb_ctrl_dat_w <= wb_in.dat(31 downto 0);
wb_ctrl_sel <= wb_in.sel(3 downto 0);
wb_ctrl_cyc <= wb_in.cyc and wb_is_ctrl;
wb_ctrl_stb <= wb_in.stb and wb_is_ctrl;
wb_ctrl_we <= wb_in.we;

-- Wishbone out signals
wb_out.ack <= wb_ctrl_ack when wb_is_ctrl ='1' else
wb_init_out.ack when wb_is_init = '1' else
user_port0_wdata_ready when state = MWRITE else
user_port0_rdata_valid when state = MREAD else '0'; user_port0_rdata_valid when state = MREAD else '0';


wb_out.dat <= (x"00000000" & wb_ctrl_dat_r) when wb_is_ctrl = '1' else wb_out.dat <= user_port0_rdata_data(127 downto 64) when ad3 = '1' else
wb_init_out.dat when wb_is_init = '1' else
user_port0_rdata_data(127 downto 64) when ad3 = '1' else
user_port0_rdata_data(63 downto 0); user_port0_rdata_data(63 downto 0);

-- We don't do pipelining yet. -- We don't do pipelining yet.
wb_out.stall <= '0' when wb_in.cyc = '0' else not wb_out.ack; wb_out.stall <= '0' when wb_in.cyc = '0' else not wb_out.ack;


-- Reset ignored, the reset controller use the pll lock signal, -- DRAM user port State machine
-- and alternate core reset address set when DRAM is not initialized.
--
core_alt_reset <= not init_done;

-- State machine
sm: process(system_clk) sm: process(system_clk)
begin begin
@ -255,7 +272,7 @@ begin
if user_port0_rdata_valid = '1' then if user_port0_rdata_valid = '1' then
state <= CMD; state <= CMD;
end if; end if;
end case; end case;
end if; end if;
end if; end if;
end process; end process;

4
litedram/generated/arty/litedram_core.init
Unescape Escape View File

@ -4,10 +4,10 @@ a602487d05009f42
a64b5a7d14004a39 a64b5a7d14004a39
2402004ca64b7b7d 2402004ca64b7b7d
602100003c200000 602100003c200000
6421ffff782107c6 6421f000782107c6
3d80000060213f00 3d80000060213f00
798c07c6618c0000 798c07c6618c0000
618c108c658cffff 618c108c658cf000
4e8004217d8903a6 4e8004217d8903a6
0000000048000002 0000000048000002
0000000000000000 0000000000000000

2
litedram/generated/arty/litedram_core.v
Unescape Escape View File

@ -1,5 +1,5 @@
//-------------------------------------------------------------------------------- //--------------------------------------------------------------------------------
// Auto-generated by Migen (0d16e03) & LiteX (3391398a) on 2020-05-15 13:30:46 // Auto-generated by Migen (0d16e03) & LiteX (3391398a) on 2020-05-16 19:06:01
//-------------------------------------------------------------------------------- //--------------------------------------------------------------------------------
module litedram_core( module litedram_core(
input wire clk, input wire clk,

129
litedram/generated/nexys-video/litedram-wrapper.vhdl
Unescape Escape View File

@ -15,18 +15,20 @@ entity litedram_wrapper is
port( port(
-- LiteDRAM generates the system clock and reset -- LiteDRAM generates the system clock and reset
-- from the input clkin -- from the input clkin
clk_in : in std_ulogic; clk_in : in std_ulogic;
rst : in std_ulogic; rst : in std_ulogic;
system_clk : out std_ulogic; system_clk : out std_ulogic;
system_reset : out std_ulogic; system_reset : out std_ulogic;
core_alt_reset : out std_ulogic; core_alt_reset : out std_ulogic;
pll_locked : out std_ulogic; pll_locked : out std_ulogic;


-- Wishbone ports: -- Wishbone ports:
wb_in : in wishbone_master_out; wb_in : in wishbone_master_out;
wb_out : out wishbone_slave_out; wb_out : out wishbone_slave_out;
wb_is_ctrl : in std_ulogic; wb_ctrl_in : in wb_io_master_out;
wb_is_init : in std_ulogic; wb_ctrl_out : out wb_io_slave_out;
wb_ctrl_is_csr : in std_ulogic;
wb_ctrl_is_init : in std_ulogic;


-- Init core serial debug -- Init core serial debug
serial_tx : out std_ulogic; serial_tx : out std_ulogic;
@ -128,8 +130,8 @@ architecture behaviour of litedram_wrapper is
signal wb_ctrl_ack : std_ulogic; signal wb_ctrl_ack : std_ulogic;
signal wb_ctrl_we : std_ulogic; signal wb_ctrl_we : std_ulogic;


signal wb_init_in : wishbone_master_out; signal wb_init_in : wb_io_master_out;
signal wb_init_out : wishbone_slave_out; signal wb_init_out : wb_io_slave_out;


type state_t is (CMD, MWRITE, MREAD); type state_t is (CMD, MWRITE, MREAD);
signal state : state_t; signal state : state_t;
@ -138,7 +140,7 @@ architecture behaviour of litedram_wrapper is
constant INIT_RAM_ABITS :integer := 14; constant INIT_RAM_ABITS :integer := 14;
constant INIT_RAM_FILE : string := "litedram_core.init"; constant INIT_RAM_FILE : string := "litedram_core.init";


type ram_t is array(0 to (INIT_RAM_SIZE / 8) - 1) of std_logic_vector(63 downto 0); type ram_t is array(0 to (INIT_RAM_SIZE / 4) - 1) of std_logic_vector(31 downto 0);


impure function init_load_ram(name : string) return ram_t is impure function init_load_ram(name : string) return ram_t is
file ram_file : text open read_mode is name; file ram_file : text open read_mode is name;
@ -150,7 +152,8 @@ architecture behaviour of litedram_wrapper is
exit when endfile(ram_file); exit when endfile(ram_file);
readline(ram_file, ram_line); readline(ram_file, ram_line);
hread(ram_line, temp_word); hread(ram_line, temp_word);
temp_ram(i) := temp_word; temp_ram(i*2) := temp_word(31 downto 0);
temp_ram(i*2+1) := temp_word(63 downto 32);
end loop; end loop;
return temp_ram; return temp_ram;
end function; end function;
@ -162,79 +165,93 @@ architecture behaviour of litedram_wrapper is


begin begin


-- BRAM Memory slave -- alternate core reset address set when DRAM is not initialized.
core_alt_reset <= not init_done;

-- BRAM Memory slave. TODO: Pipeline it with an output buffer
-- to improve timing
init_ram_0: process(system_clk) init_ram_0: process(system_clk)
variable adr : integer; variable adr : integer;
begin begin
if rising_edge(system_clk) then if rising_edge(system_clk) then
wb_init_out.ack <= '0'; wb_init_out.ack <= '0';
if (wb_init_in.cyc and wb_init_in.stb) = '1' then if (wb_init_in.cyc and wb_init_in.stb) = '1' then
adr := to_integer((unsigned(wb_init_in.adr(INIT_RAM_ABITS-1 downto 3)))); adr := to_integer((unsigned(wb_init_in.adr(INIT_RAM_ABITS-1 downto 2))));
if wb_init_in.we = '0' then if wb_init_in.we = '0' then
wb_init_out.dat <= init_ram(adr); wb_init_out.dat <= init_ram(adr);
else else
for i in 0 to 7 loop for i in 0 to 3 loop
if wb_init_in.sel(i) = '1' then if wb_init_in.sel(i) = '1' then
init_ram(adr)(((i + 1) * 8) - 1 downto i * 8) <= init_ram(adr)(((i + 1) * 8) - 1 downto i * 8) <=
wb_init_in.dat(((i + 1) * 8) - 1 downto i * 8); wb_init_in.dat(((i + 1) * 8) - 1 downto i * 8);
end if; end if;
end loop; end loop;
end if; end if;
wb_init_out.ack <= not wb_init_out.ack; wb_init_out.ack <= '1';
end if; end if;
end if; end if;
end process; end process;


wb_init_in.adr <= wb_in.adr; --
wb_init_in.dat <= wb_in.dat; -- Control bus wishbone: This muxes the wishbone to the CSRs
wb_init_in.sel <= wb_in.sel; -- and an internal small one to the init BRAM
wb_init_in.we <= wb_in.we; --
wb_init_in.stb <= wb_in.stb;
wb_init_in.cyc <= wb_in.cyc and wb_is_init; -- Init DRAM wishbone IN signals
wb_init_in.adr <= wb_ctrl_in.adr;
wb_init_in.dat <= wb_ctrl_in.dat;
wb_init_in.sel <= wb_ctrl_in.sel;
wb_init_in.we <= wb_ctrl_in.we;
wb_init_in.stb <= wb_ctrl_in.stb;
wb_init_in.cyc <= wb_ctrl_in.cyc and wb_ctrl_is_init;

-- DRAM CSR IN signals
wb_ctrl_adr <= x"0000" & wb_ctrl_in.adr(15 downto 2);
wb_ctrl_dat_w <= wb_ctrl_in.dat;
wb_ctrl_sel <= wb_ctrl_in.sel;
wb_ctrl_we <= wb_ctrl_in.we;
wb_ctrl_cyc <= wb_ctrl_in.cyc and wb_ctrl_is_csr;
wb_ctrl_stb <= wb_ctrl_in.stb and wb_ctrl_is_csr;


-- Address bit 3 selects the top or bottom half of the data -- Ctrl bus wishbone OUT signals
wb_ctrl_out.ack <= wb_ctrl_ack when wb_ctrl_is_csr = '1'
else wb_init_out.ack;
wb_ctrl_out.dat <= wb_ctrl_dat_r when wb_ctrl_is_csr = '1'
else wb_init_out.dat;
wb_ctrl_out.stall <= wb_init_out.stall when wb_ctrl_is_init else
'0' when wb_ctrl_in.cyc = '0' else not wb_ctrl_ack;

--
-- Data bus wishbone to LiteDRAM native port
--
-- Address bit 3 selects the top or bottom half of the data
-- bus (64-bit wishbone vs. 128-bit DRAM interface) -- bus (64-bit wishbone vs. 128-bit DRAM interface)
-- --
-- XXX TODO: Figure out how to pipeline this
--
ad3 <= wb_in.adr(3); ad3 <= wb_in.adr(3);


-- DRAM data interface signals -- Wishbone port IN signals
user_port0_cmd_valid <= (wb_in.cyc and wb_in.stb and not wb_is_ctrl and not wb_is_init) user_port0_cmd_valid <= wb_in.cyc and wb_in.stb when state = CMD else '0';
when state = CMD else '0'; user_port0_cmd_we <= wb_in.we when state = CMD else '0';
user_port0_cmd_we <= wb_in.we when state = CMD else '0';
user_port0_wdata_valid <= '1' when state = MWRITE else '0'; user_port0_wdata_valid <= '1' when state = MWRITE else '0';
user_port0_rdata_ready <= '1' when state = MREAD else '0'; user_port0_rdata_ready <= '1' when state = MREAD else '0';
user_port0_cmd_addr <= wb_in.adr(DRAM_ABITS+3 downto 4); user_port0_cmd_addr <= wb_in.adr(DRAM_ABITS+3 downto 4);
user_port0_wdata_data <= wb_in.dat & wb_in.dat; user_port0_wdata_data <= wb_in.dat & wb_in.dat;
user_port0_wdata_we <= wb_in.sel & "00000000" when ad3 = '1' else user_port0_wdata_we <= wb_in.sel & "00000000" when ad3 = '1' else
"00000000" & wb_in.sel; "00000000" & wb_in.sel;


-- DRAM ctrl interface signals -- Wishbone OUT signals
wb_ctrl_adr <= x"0000" & wb_in.adr(15 downto 2); wb_out.ack <= user_port0_wdata_ready when state = MWRITE else
wb_ctrl_dat_w <= wb_in.dat(31 downto 0);
wb_ctrl_sel <= wb_in.sel(3 downto 0);
wb_ctrl_cyc <= wb_in.cyc and wb_is_ctrl;
wb_ctrl_stb <= wb_in.stb and wb_is_ctrl;
wb_ctrl_we <= wb_in.we;

-- Wishbone out signals
wb_out.ack <= wb_ctrl_ack when wb_is_ctrl ='1' else
wb_init_out.ack when wb_is_init = '1' else
user_port0_wdata_ready when state = MWRITE else
user_port0_rdata_valid when state = MREAD else '0'; user_port0_rdata_valid when state = MREAD else '0';


wb_out.dat <= (x"00000000" & wb_ctrl_dat_r) when wb_is_ctrl = '1' else wb_out.dat <= user_port0_rdata_data(127 downto 64) when ad3 = '1' else
wb_init_out.dat when wb_is_init = '1' else
user_port0_rdata_data(127 downto 64) when ad3 = '1' else
user_port0_rdata_data(63 downto 0); user_port0_rdata_data(63 downto 0);

-- We don't do pipelining yet. -- We don't do pipelining yet.
wb_out.stall <= '0' when wb_in.cyc = '0' else not wb_out.ack; wb_out.stall <= '0' when wb_in.cyc = '0' else not wb_out.ack;


-- Reset ignored, the reset controller use the pll lock signal, -- DRAM user port State machine
-- and alternate core reset address set when DRAM is not initialized.
--
core_alt_reset <= not init_done;

-- State machine
sm: process(system_clk) sm: process(system_clk)
begin begin
@ -255,7 +272,7 @@ begin
if user_port0_rdata_valid = '1' then if user_port0_rdata_valid = '1' then
state <= CMD; state <= CMD;
end if; end if;
end case; end case;
end if; end if;
end if; end if;
end process; end process;

4
litedram/generated/nexys-video/litedram_core.init
Unescape Escape View File

@ -4,10 +4,10 @@ a602487d05009f42
a64b5a7d14004a39 a64b5a7d14004a39
2402004ca64b7b7d 2402004ca64b7b7d
602100003c200000 602100003c200000
6421ffff782107c6 6421f000782107c6
3d80000060213f00 3d80000060213f00
798c07c6618c0000 798c07c6618c0000
618c108c658cffff 618c108c658cf000
4e8004217d8903a6 4e8004217d8903a6
0000000048000002 0000000048000002
0000000000000000 0000000000000000

2
litedram/generated/nexys-video/litedram_core.v
Unescape Escape View File

@ -1,5 +1,5 @@
//-------------------------------------------------------------------------------- //--------------------------------------------------------------------------------
// Auto-generated by Migen (0d16e03) & LiteX (3391398a) on 2020-05-15 13:30:49 // Auto-generated by Migen (0d16e03) & LiteX (3391398a) on 2020-05-16 19:06:03
//-------------------------------------------------------------------------------- //--------------------------------------------------------------------------------
module litedram_core( module litedram_core(
input wire clk, input wire clk,

368
soc.vhdl
Unescape Escape View File

@ -12,14 +12,17 @@ use work.wishbone_types.all;


-- Memory map. *** Keep include/microwatt_soc.h updated on changes *** -- Memory map. *** Keep include/microwatt_soc.h updated on changes ***
-- --
-- Main bus:
-- 0x00000000: Block RAM (MEMORY_SIZE) or DRAM depending on syscon -- 0x00000000: Block RAM (MEMORY_SIZE) or DRAM depending on syscon
-- 0x40000000: DRAM (when present) -- 0x40000000: DRAM (when present)
-- 0x80000000: Block RAM (aliased & repeated)

-- IO Bus:
-- 0xc0000000: SYSCON -- 0xc0000000: SYSCON
-- 0xc0002000: UART0 -- 0xc0002000: UART0
-- 0xc0004000: XICS ICP -- 0xc0004000: XICS ICP
-- 0xc0100000: LiteDRAM control (CSRs) -- 0xc0100000: LiteDRAM control (CSRs)
-- 0xf0000000: Block RAM (aliased & repeated) -- 0xf0000000: DRAM init code (if any)
-- 0xffff0000: DRAM init code (if any)


entity soc is entity soc is
generic ( generic (
@ -37,10 +40,12 @@ entity soc is
system_clk : in std_ulogic; system_clk : in std_ulogic;


-- DRAM controller signals -- DRAM controller signals
wb_dram_in : out wishbone_master_out; wb_dram_in : out wishbone_master_out;
wb_dram_out : in wishbone_slave_out; wb_dram_out : in wishbone_slave_out;
wb_dram_ctrl : out std_ulogic; wb_dram_ctrl_in : out wb_io_master_out;
wb_dram_init : out std_ulogic; wb_dram_ctrl_out : in wb_io_slave_out;
wb_dram_is_csr : out std_ulogic;
wb_dram_is_init : out std_ulogic;


-- UART0 signals: -- UART0 signals:
uart0_txd : out std_ulogic; uart0_txd : out std_ulogic;
@ -71,20 +76,28 @@ architecture behaviour of soc is
signal wb_master_in : wishbone_slave_out; signal wb_master_in : wishbone_slave_out;
signal wb_master_out : wishbone_master_out; signal wb_master_out : wishbone_master_out;


-- Main "IO" bus, from main slave decoder to the latch
signal wb_io_in : wishbone_master_out;
signal wb_io_out : wishbone_slave_out;

-- Secondary (smaller) IO bus after the IO bus latch
signal wb_sio_out : wb_io_master_out;
signal wb_sio_in : wb_io_slave_out;

-- Syscon signals -- Syscon signals
signal dram_at_0 : std_ulogic; signal dram_at_0 : std_ulogic;
signal do_core_reset : std_ulogic; signal do_core_reset : std_ulogic;
signal wb_syscon_in : wishbone_master_out; signal wb_syscon_in : wb_io_master_out;
signal wb_syscon_out : wishbone_slave_out; signal wb_syscon_out : wb_io_slave_out;


-- UART0 signals: -- UART0 signals:
signal wb_uart0_in : wishbone_master_out; signal wb_uart0_in : wb_io_master_out;
signal wb_uart0_out : wishbone_slave_out; signal wb_uart0_out : wb_io_slave_out;
signal uart_dat8 : std_ulogic_vector(7 downto 0); signal uart_dat8 : std_ulogic_vector(7 downto 0);


-- XICS0 signals: -- XICS0 signals:
signal wb_xics0_in : wishbone_master_out; signal wb_xics0_in : wb_io_master_out;
signal wb_xics0_out : wishbone_slave_out; signal wb_xics0_out : wb_io_slave_out;
signal int_level_in : std_ulogic_vector(15 downto 0); signal int_level_in : std_ulogic_vector(15 downto 0);


signal xics_to_execute1 : XicsToExecute1Type; signal xics_to_execute1 : XicsToExecute1Type;
@ -141,7 +154,7 @@ begin
generic map( generic map(
SIM => SIM, SIM => SIM,
DISABLE_FLATTEN => DISABLE_FLATTEN_CORE, DISABLE_FLATTEN => DISABLE_FLATTEN_CORE,
ALT_RESET_ADDRESS => (15 downto 0 => '0', others => '1') ALT_RESET_ADDRESS => (27 downto 0 => '0', others => '1')
) )
port map( port map(
clk => system_clk, clk => system_clk,
@ -180,90 +193,271 @@ begin
wb_slave_in => wb_master_in wb_slave_in => wb_master_in
); );


-- Wishbone slaves address decoder & mux -- Top level Wishbone slaves address decoder & mux
slave_intercon: process(wb_master_out, wb_bram_out, wb_uart0_out, wb_dram_out, wb_syscon_out) --
-- Selected slave -- From CPU to BRAM, DRAM, IO, selected on top 3 bits and dram_at_0
type slave_type is (SLAVE_SYSCON, -- 0000 - BRAM
SLAVE_UART, -- 0001 - DRAM
SLAVE_BRAM, -- 01xx - DRAM
SLAVE_DRAM, -- 10xx - BRAM
SLAVE_DRAM_INIT, -- 11xx - IO
SLAVE_DRAM_CTRL, --
SLAVE_ICP_0, slave_top_intercon: process(wb_master_out, wb_bram_out, wb_dram_out, wb_io_out, dram_at_0)
SLAVE_NONE); type slave_top_type is (SLAVE_TOP_BRAM,
variable slave : slave_type; SLAVE_TOP_DRAM,
SLAVE_TOP_IO);
variable slave_top : slave_top_type;
variable top_decode : std_ulogic_vector(3 downto 0);
begin begin
-- Simple address decoder. -- Top-level address decoder
slave := SLAVE_NONE; top_decode := wb_master_out.adr(31 downto 29) & dram_at_0;
-- Simple address decoder. Ignore top bits to save silicon for now slave_top := SLAVE_TOP_BRAM;
slave := SLAVE_NONE; if std_match(top_decode, "0000") then
if std_match(wb_master_out.adr, x"0-------") then slave_top := SLAVE_TOP_BRAM;
slave := SLAVE_DRAM when HAS_DRAM and dram_at_0 = '1' else elsif std_match(top_decode, "0001") then
SLAVE_BRAM; slave_top := SLAVE_TOP_DRAM;
elsif std_match(wb_master_out.adr, x"FFFF----") then elsif std_match(top_decode, "01--") then
slave := SLAVE_DRAM_INIT; slave_top := SLAVE_TOP_DRAM;
elsif std_match(wb_master_out.adr, x"F-------") then elsif std_match(top_decode, "10--") then
slave := SLAVE_BRAM; slave_top := SLAVE_TOP_BRAM;
elsif std_match(wb_master_out.adr, x"4-------") and HAS_DRAM then elsif std_match(top_decode, "11--") then
slave := SLAVE_DRAM; slave_top := SLAVE_TOP_IO;
elsif std_match(wb_master_out.adr, x"C0000---") then
slave := SLAVE_SYSCON;
elsif std_match(wb_master_out.adr, x"C0002---") then
slave := SLAVE_UART;
elsif std_match(wb_master_out.adr, x"C01-----") then
slave := SLAVE_DRAM_CTRL;
elsif std_match(wb_master_out.adr, x"C0004---") then
slave := SLAVE_ICP_0;
end if; end if;


-- Wishbone muxing. Defaults: -- Top level wishbone muxing.
wb_bram_in <= wb_master_out; wb_bram_in <= wb_master_out;
wb_bram_in.cyc <= '0'; wb_bram_in.cyc <= '0';
wb_uart0_in <= wb_master_out; wb_dram_in <= wb_master_out;
wb_dram_in.cyc <= '0';
wb_io_in <= wb_master_out;
wb_io_in.cyc <= '0';
case slave_top is
when SLAVE_TOP_BRAM =>
wb_bram_in.cyc <= wb_master_out.cyc;
wb_master_in <= wb_bram_out;
when SLAVE_TOP_DRAM =>
wb_dram_in.cyc <= wb_master_out.cyc;
wb_master_in <= wb_dram_out;
when SLAVE_TOP_IO =>
wb_io_in.cyc <= wb_master_out.cyc;
wb_master_in <= wb_io_out;
end case;
end process slave_top_intercon;

-- IO wishbone slave 64->32 bits converter
--
-- For timing reasons, this adds a one cycle latch on the way both
-- in and out. This relaxes timing and routing pressure on the "main"
-- memory bus by moving all simple IOs to a slower 32-bit bus.
--
-- This implementation is rather dumb at the moment, no stash buffer,
-- so we stall whenever that latch is busy. This can be improved.
--
slave_io_latch: process(system_clk)
-- State
type state_t is (IDLE, WAIT_ACK_BOT, WAIT_ACK_TOP);
variable state : state_t;

-- Misc
variable has_top : boolean;
variable has_bot : boolean;
begin
if rising_edge(system_clk) then
if (rst) then
state := IDLE;
wb_io_out.ack <= '0';
wb_io_out.stall <= '0';
wb_sio_out.cyc <= '0';
wb_sio_out.stb <= '0';
has_top := false;
has_bot := false;
else
case state is
when IDLE =>
-- Clear ACK in case it was set
wb_io_out.ack <= '0';

-- Do we have a cycle ?
if wb_io_in.cyc = '1' and wb_io_in.stb = '1' then
-- Stall master until we are done, we are't (yet) pipelining
-- this, it's all slow IOs.
wb_io_out.stall <= '1';

-- Start cycle downstream
wb_sio_out.cyc <= '1';
wb_sio_out.stb <= '1';

-- Copy write enable to IO out, copy address as well
wb_sio_out.we <= wb_io_in.we;
wb_sio_out.adr <= wb_io_in.adr(wb_sio_out.adr'left downto 3) & "000";

-- Do we have a top word and/or a bottom word ?
has_top := wb_io_in.sel(7 downto 4) /= "0000";
has_bot := wb_io_in.sel(3 downto 0) /= "0000";

-- If we have a bottom word, handle it first, otherwise
-- send the top word down. XXX Split the actual mux out
-- and only generate a control signal.
if has_bot then
if wb_io_in.we = '1' then
wb_sio_out.dat <= wb_io_in.dat(31 downto 0);
end if;
wb_sio_out.sel <= wb_io_in.sel(3 downto 0);

-- Wait for ack
state := WAIT_ACK_BOT;
else
if wb_io_in.we = '1' then
wb_sio_out.dat <= wb_io_in.dat(63 downto 32);
end if;
wb_sio_out.sel <= wb_io_in.sel(7 downto 4);

-- Bump address
wb_sio_out.adr(2) <= '1';

-- Wait for ack
state := WAIT_ACK_TOP;
end if;
end if;
when WAIT_ACK_BOT =>
-- If we aren't stalled by the device, clear stb
if wb_sio_in.stall = '0' then
wb_sio_out.stb <= '0';
end if;

-- Handle ack
if wb_sio_in.ack = '1' then
-- If it's a read, latch the data
if wb_sio_out.we = '0' then
wb_io_out.dat(31 downto 0) <= wb_sio_in.dat;
end if;

-- Do we have a "top" part as well ?
if has_top then
-- Latch data & sel
if wb_io_in.we = '1' then
wb_sio_out.dat <= wb_io_in.dat(63 downto 32);
end if;
wb_sio_out.sel <= wb_io_in.sel(7 downto 4);

-- Bump address and set STB
wb_sio_out.adr(2) <= '1';
wb_sio_out.stb <= '1';

-- Wait for new ack
state := WAIT_ACK_TOP;
else
-- We are done, ack up, clear cyc downstram
wb_sio_out.cyc <= '0';

-- And ack & unstall upstream
wb_io_out.ack <= '1';
wb_io_out.stall <= '0';

-- Wait for next one
state := IDLE;
end if;
end if;
when WAIT_ACK_TOP =>
-- If we aren't stalled by the device, clear stb
if wb_sio_in.stall = '0' then
wb_sio_out.stb <= '0';
end if;

-- Handle ack
if wb_sio_in.ack = '1' then
-- If it's a read, latch the data
if wb_sio_out.we = '0' then
wb_io_out.dat(63 downto 32) <= wb_sio_in.dat;
end if;

-- We are done, ack up, clear cyc downstram
wb_sio_out.cyc <= '0';

-- And ack & unstall upstream
wb_io_out.ack <= '1';
wb_io_out.stall <= '0';

-- Wait for next one
state := IDLE;
end if;
end case;
end if;
end if;
end process;
-- IO wishbone slave intercon.
--
slave_io_intercon: process(wb_sio_out, wb_syscon_out, wb_uart0_out,
wb_dram_ctrl_out, wb_xics0_out)
-- IO branch split:
type slave_io_type is (SLAVE_IO_SYSCON,
SLAVE_IO_UART,
SLAVE_IO_DRAM_INIT,
SLAVE_IO_DRAM_CSR,
SLAVE_IO_ICP_0,
SLAVE_IO_NONE);
variable slave_io : slave_io_type;

variable match : std_ulogic_vector(31 downto 12);
begin

-- Simple address decoder.
slave_io := SLAVE_IO_NONE;
match := "11" & wb_sio_out.adr(29 downto 12);
if std_match(match, x"F----") then
slave_io := SLAVE_IO_DRAM_INIT;
elsif std_match(match, x"C0000") then
slave_io := SLAVE_IO_SYSCON;
elsif std_match(match, x"C0002") then
slave_io := SLAVE_IO_UART;
elsif std_match(match, x"C01--") then
slave_io := SLAVE_IO_DRAM_CSR;
elsif std_match(match, x"C0004") then
slave_io := SLAVE_IO_ICP_0;
end if;
wb_uart0_in <= wb_sio_out;
wb_uart0_in.cyc <= '0'; wb_uart0_in.cyc <= '0';


-- Only give xics 8 bits of wb addr -- Only give xics 8 bits of wb addr
wb_xics0_in <= wb_master_out; wb_xics0_in <= wb_sio_out;
wb_xics0_in.adr <= (others => '0'); wb_xics0_in.adr <= (others => '0');
wb_xics0_in.adr(7 downto 0) <= wb_master_out.adr(7 downto 0); wb_xics0_in.adr(7 downto 0) <= wb_sio_out.adr(7 downto 0);
wb_xics0_in.cyc <= '0'; wb_xics0_in.cyc <= '0';


wb_dram_in <= wb_master_out; wb_dram_ctrl_in <= wb_sio_out;
wb_dram_in.cyc <= '0'; wb_dram_ctrl_in.cyc <= '0';
wb_dram_ctrl <= '0'; wb_dram_is_csr <= '0';
wb_dram_init <= '0'; wb_dram_is_init <= '0';
wb_syscon_in <= wb_master_out;
wb_syscon_in <= wb_sio_out;
wb_syscon_in.cyc <= '0'; wb_syscon_in.cyc <= '0';
case slave is
when SLAVE_BRAM => case slave_io is
wb_bram_in.cyc <= wb_master_out.cyc; when SLAVE_IO_DRAM_INIT =>
wb_master_in <= wb_bram_out; wb_dram_ctrl_in.cyc <= wb_sio_out.cyc;
when SLAVE_DRAM => wb_sio_in <= wb_dram_ctrl_out;
wb_dram_in.cyc <= wb_master_out.cyc; wb_dram_is_init <= '1';
wb_master_in <= wb_dram_out; when SLAVE_IO_DRAM_CSR =>
when SLAVE_DRAM_INIT => wb_dram_ctrl_in.cyc <= wb_sio_out.cyc;
wb_dram_in.cyc <= wb_master_out.cyc; wb_sio_in <= wb_dram_ctrl_out;
wb_master_in <= wb_dram_out; wb_dram_is_csr <= '1';
wb_dram_init <= '1'; when SLAVE_IO_SYSCON =>
when SLAVE_DRAM_CTRL => wb_syscon_in.cyc <= wb_sio_out.cyc;
wb_dram_in.cyc <= wb_master_out.cyc; wb_sio_in <= wb_syscon_out;
wb_master_in <= wb_dram_out; when SLAVE_IO_UART =>
wb_dram_ctrl <= '1'; wb_uart0_in.cyc <= wb_sio_out.cyc;
when SLAVE_SYSCON => wb_sio_in <= wb_uart0_out;
wb_syscon_in.cyc <= wb_master_out.cyc; when SLAVE_IO_ICP_0 =>
wb_master_in <= wb_syscon_out; wb_xics0_in.cyc <= wb_sio_out.cyc;
when SLAVE_UART => wb_sio_in <= wb_xics0_out;
wb_uart0_in.cyc <= wb_master_out.cyc;
wb_master_in <= wb_uart0_out;
when SLAVE_ICP_0 =>
wb_xics0_in.cyc <= wb_master_out.cyc;
wb_master_in <= wb_xics0_out;
when others => when others =>
wb_master_in.dat <= (others => '1'); wb_sio_in.dat <= (others => '1');
wb_master_in.ack <= wb_master_out.stb and wb_master_out.cyc; wb_sio_in.ack <= wb_sio_out.stb and wb_sio_out.cyc;
wb_master_in.stall <= '0'; wb_sio_in.stall <= '0';
end case; end case;
end process slave_intercon;
end process;


-- Syscon slave -- Syscon slave
syscon0: entity work.syscon syscon0: entity work.syscon
@ -287,10 +481,6 @@ begin
-- Simulated memory and UART -- Simulated memory and UART


-- UART0 wishbone slave -- UART0 wishbone slave
-- XXX FIXME: Need a proper wb64->wb8 adapter that
-- converts SELs into low address bits and muxes
-- data accordingly (either that or rejects large
-- cycles).
uart0: entity work.pp_soc_uart uart0: entity work.pp_soc_uart
generic map( generic map(
FIFO_DEPTH => 32 FIFO_DEPTH => 32
@ -309,7 +499,7 @@ begin
wb_we_in => wb_uart0_in.we, wb_we_in => wb_uart0_in.we,
wb_ack_out => wb_uart0_out.ack wb_ack_out => wb_uart0_out.ack
); );
wb_uart0_out.dat <= x"00000000000000" & uart_dat8; wb_uart0_out.dat <= x"000000" & uart_dat8;
wb_uart0_out.stall <= '0' when wb_uart0_in.cyc = '0' else not wb_uart0_out.ack; wb_uart0_out.stall <= '0' when wb_uart0_in.cyc = '0' else not wb_uart0_out.ack;


xics0: entity work.xics xics0: entity work.xics

15
syscon.vhdl
Unescape Escape View File

@ -20,8 +20,8 @@ entity syscon is
rst : in std_ulogic; rst : in std_ulogic;


-- Wishbone ports: -- Wishbone ports:
wishbone_in : in wishbone_master_out; wishbone_in : in wb_io_master_out;
wishbone_out : out wishbone_slave_out; wishbone_out : out wb_io_slave_out;


-- System control ports -- System control ports
dram_at_0 : out std_ulogic; dram_at_0 : out std_ulogic;
@ -43,6 +43,9 @@ architecture behaviour of syscon is
constant SYS_REG_CLKINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "100"; constant SYS_REG_CLKINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "100";
constant SYS_REG_CTRL : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "101"; constant SYS_REG_CTRL : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "101";


-- Muxed reg read signal
signal reg_out : std_ulogic_vector(63 downto 0);

-- INFO register bits -- INFO register bits
constant SYS_REG_INFO_HAS_UART : integer := 0; constant SYS_REG_INFO_HAS_UART : integer := 0;
constant SYS_REG_INFO_HAS_DRAM : integer := 1; constant SYS_REG_INFO_HAS_DRAM : integer := 1;
@ -99,7 +102,7 @@ begin
SYS_REG_CTRL_BITS-1 downto 0 => reg_ctrl); SYS_REG_CTRL_BITS-1 downto 0 => reg_ctrl);


-- Register read mux -- Register read mux
with wishbone_in.adr(SYS_REG_BITS+2 downto 3) select wishbone_out.dat <= with wishbone_in.adr(SYS_REG_BITS+2 downto 3) select reg_out <=
SIG_VALUE when SYS_REG_SIG, SIG_VALUE when SYS_REG_SIG,
reg_info when SYS_REG_INFO, reg_info when SYS_REG_INFO,
reg_braminfo when SYS_REG_BRAMINFO, reg_braminfo when SYS_REG_BRAMINFO,
@ -107,6 +110,8 @@ begin
reg_clkinfo when SYS_REG_CLKINFO, reg_clkinfo when SYS_REG_CLKINFO,
reg_ctrl_out when SYS_REG_CTRL, reg_ctrl_out when SYS_REG_CTRL,
(others => '0') when others; (others => '0') when others;
wishbone_out.dat <= reg_out(63 downto 32) when wishbone_in.adr(2) = '1' else
reg_out(31 downto 0);


-- Register writes -- Register writes
regs_write: process(clk) regs_write: process(clk)
@ -116,7 +121,9 @@ begin
reg_ctrl <= (others => '0'); reg_ctrl <= (others => '0');
else else
if wishbone_in.cyc and wishbone_in.stb and wishbone_in.we then if wishbone_in.cyc and wishbone_in.stb and wishbone_in.we then
if wishbone_in.adr(SYS_REG_BITS+2 downto 3) = SYS_REG_CTRL then -- Change this if CTRL ever has more than 32 bits
if wishbone_in.adr(SYS_REG_BITS+2 downto 3) = SYS_REG_CTRL and
wishbone_in.adr(2) = '0' then
reg_ctrl(SYS_REG_CTRL_BITS-1 downto 0) <= reg_ctrl(SYS_REG_CTRL_BITS-1 downto 0) <=
wishbone_in.dat(SYS_REG_CTRL_BITS-1 downto 0); wishbone_in.dat(SYS_REG_CTRL_BITS-1 downto 0);
end if; end if;

19
tests/xics/xics.h
Unescape Escape View File

@ -1,8 +1,7 @@
#include <stdint.h> #include <stdint.h>


#define XICS_BASE 0xc0004000 #include "microwatt_soc.h"

#include "io.h"
static uint64_t xics_base = XICS_BASE;


#define XICS_XIRR_POLL 0x0 #define XICS_XIRR_POLL 0x0
#define XICS_XIRR 0x4 #define XICS_XIRR 0x4
@ -11,26 +10,20 @@ static uint64_t xics_base = XICS_BASE;


uint8_t xics_read8(int offset) uint8_t xics_read8(int offset)
{ {
uint32_t val; return readb(XICS_BASE + offset);

__asm__ volatile("lbzcix %0,%1,%2" : "=r" (val) : "b" (xics_base), "r" (offset));
return val;
} }


void xics_write8(int offset, uint8_t val) void xics_write8(int offset, uint8_t val)
{ {
__asm__ volatile("stbcix %0,%1,%2" : : "r" (val), "b" (xics_base), "r" (offset)); writeb(val, XICS_BASE + offset);
} }


uint32_t xics_read32(int offset) uint32_t xics_read32(int offset)
{ {
uint32_t val; return readl(XICS_BASE + offset);

__asm__ volatile("lwzcix %0,%1,%2" : "=r" (val) : "b" (xics_base), "r" (offset));
return val;
} }


void xics_write32(int offset, uint32_t val) void xics_write32(int offset, uint32_t val)
{ {
__asm__ volatile("stwcix %0,%1,%2" : : "r" (val), "b" (xics_base), "r" (offset)); writel(val, XICS_BASE + offset);
} }

21
wishbone_types.vhdl
Unescape Escape View File

@ -2,6 +2,9 @@ library ieee;
use ieee.std_logic_1164.all; use ieee.std_logic_1164.all;


package wishbone_types is package wishbone_types is
--
-- Main CPU bus. 32-bit address, 64-bit data
--
constant wishbone_addr_bits : integer := 32; constant wishbone_addr_bits : integer := 32;
constant wishbone_data_bits : integer := 64; constant wishbone_data_bits : integer := 64;
constant wishbone_sel_bits : integer := wishbone_data_bits/8; constant wishbone_sel_bits : integer := wishbone_data_bits/8;
@ -30,4 +33,22 @@ package wishbone_types is
type wishbone_master_out_vector is array (natural range <>) of wishbone_master_out; type wishbone_master_out_vector is array (natural range <>) of wishbone_master_out;
type wishbone_slave_out_vector is array (natural range <>) of wishbone_slave_out; type wishbone_slave_out_vector is array (natural range <>) of wishbone_slave_out;


--
-- IO Bus to a device, 30-bit address, 32-bits data
--
type wb_io_master_out is record
adr : std_ulogic_vector(29 downto 0);
dat : std_ulogic_vector(31 downto 0);
sel : std_ulogic_vector(3 downto 0);
cyc : std_ulogic;
stb : std_ulogic;
we : std_ulogic;
end record;

type wb_io_slave_out is record
dat : std_ulogic_vector(31 downto 0);
ack : std_ulogic;
stall : std_ulogic;
end record;
end package wishbone_types; end package wishbone_types;

97
xics.vhdl
Unescape Escape View File

@ -30,8 +30,8 @@ entity xics is
clk : in std_logic; clk : in std_logic;
rst : in std_logic; rst : in std_logic;


wb_in : in wishbone_master_out; wb_in : in wb_io_master_out;
wb_out : out wishbone_slave_out; wb_out : out wb_io_slave_out;


int_level_in : in std_ulogic_vector(LEVEL_NUM - 1 downto 0); int_level_in : in std_ulogic_vector(LEVEL_NUM - 1 downto 0);


@ -47,7 +47,7 @@ architecture behaviour of xics is
mfrr : std_ulogic_vector(7 downto 0); mfrr : std_ulogic_vector(7 downto 0);
mfrr_pending : std_ulogic; mfrr_pending : std_ulogic;
irq : std_ulogic; irq : std_ulogic;
wb_rd_data : wishbone_data_type; wb_rd_data : std_ulogic_vector(31 downto 0);
wb_ack : std_ulogic; wb_ack : std_ulogic;
end record; end record;
constant reg_internal_init : reg_internal_t := constant reg_internal_init : reg_internal_t :=
@ -62,11 +62,11 @@ architecture behaviour of xics is
-- hardwire the hardware IRQ priority -- hardwire the hardware IRQ priority
constant HW_PRIORITY : std_ulogic_vector(7 downto 0) := x"80"; constant HW_PRIORITY : std_ulogic_vector(7 downto 0) := x"80";


-- 32 bit offsets for each presentation -- 8 bit offsets for each presentation
constant XIRR_POLL : std_ulogic_vector(31 downto 0) := x"00000000"; constant XIRR_POLL : std_ulogic_vector(7 downto 0) := x"00";
constant XIRR : std_ulogic_vector(31 downto 0) := x"00000004"; constant XIRR : std_ulogic_vector(7 downto 0) := x"04";
constant RESV0 : std_ulogic_vector(31 downto 0) := x"00000008"; constant RESV0 : std_ulogic_vector(7 downto 0) := x"08";
constant MFRR : std_ulogic_vector(31 downto 0) := x"0000000c"; constant MFRR : std_ulogic_vector(7 downto 0) := x"0c";


begin begin


@ -95,62 +95,73 @@ begin
irq_eoi := '0'; irq_eoi := '0';


if wb_in.cyc = '1' and wb_in.stb = '1' then if wb_in.cyc = '1' and wb_in.stb = '1' then
-- wishbone addresses we get are 64 bit alligned, so we
-- need to use the sel bits to get 32 bit chunks.
v.wb_ack := '1'; -- always ack v.wb_ack := '1'; -- always ack
if wb_in.we = '1' then -- write if wb_in.we = '1' then -- write
-- writes to both XIRR are the same -- writes to both XIRR are the same
if wb_in.adr = XIRR_POLL then case wb_in.adr(7 downto 0) is
report "XICS XIRR_POLL/XIRR write"; when XIRR_POLL =>
if wb_in.sel = x"0f" then -- 4 bytes report "XICS XIRR_POLL write";
if wb_in.sel = x"f" then -- 4 bytes
v.cppr := wb_in.dat(31 downto 24);
elsif wb_in.sel = x"1" then -- 1 byte
v.cppr := wb_in.dat(7 downto 0);
end if;
when XIRR =>
if wb_in.sel = x"f" then -- 4 byte
report "XICS XIRR write word:" & to_hstring(wb_in.dat);
v.cppr := wb_in.dat(31 downto 24); v.cppr := wb_in.dat(31 downto 24);
elsif wb_in.sel = x"f0" then -- 4 byte
v.cppr := wb_in.dat(63 downto 56);
irq_eoi := '1'; irq_eoi := '1';
elsif wb_in.sel = x"01" then -- 1 byte elsif wb_in.sel = x"1" then -- 1 byte
report "XICS XIRR write byte:" & to_hstring(wb_in.dat(7 downto 0));
v.cppr := wb_in.dat(7 downto 0); v.cppr := wb_in.dat(7 downto 0);
elsif wb_in.sel = x"10" then -- 1 byte else
v.cppr := wb_in.dat(39 downto 32); report "XICS XIRR UNSUPPORTED write ! sel=" & to_hstring(wb_in.sel);
end if; end if;

when MFRR =>
elsif wb_in.adr = RESV0 then if wb_in.sel = x"f" then -- 4 bytes
report "XICS MFRR write"; report "XICS MFRR write word:" & to_hstring(wb_in.dat);
if wb_in.sel = x"f0" then -- 4 bytes
v.mfrr_pending := '1'; v.mfrr_pending := '1';
v.mfrr := wb_in.dat(63 downto 56); v.mfrr := wb_in.dat(31 downto 24);
elsif wb_in.sel = x"10" then -- 1 byte elsif wb_in.sel = x"1" then -- 1 byte
report "XICS MFRR write byte:" & to_hstring(wb_in.dat(7 downto 0));
v.mfrr_pending := '1'; v.mfrr_pending := '1';
v.mfrr := wb_in.dat(39 downto 32); v.mfrr := wb_in.dat(7 downto 0);
else
report "XICS MFRR UNSUPPORTED write ! sel=" & to_hstring(wb_in.sel);
end if; end if;

when others =>
end if; end case;


else -- read else -- read
v.wb_rd_data := (others => '0'); v.wb_rd_data := (others => '0');


if wb_in.adr = XIRR_POLL then case wb_in.adr(7 downto 0) is
report "XICS XIRR_POLL/XIRR read"; when XIRR_POLL =>
if wb_in.sel = x"0f" then report "XICS XIRR_POLL read";
if wb_in.sel = x"f" then
v.wb_rd_data(23 downto 0) := r.xisr; v.wb_rd_data(23 downto 0) := r.xisr;
v.wb_rd_data(31 downto 24) := r.cppr; v.wb_rd_data(31 downto 24) := r.cppr;
elsif wb_in.sel = x"f0" then elsif wb_in.sel = x"1" then
v.wb_rd_data(55 downto 32) := r.xisr;
v.wb_rd_data(63 downto 56) := r.cppr;
xirr_accept_rd := '1';
elsif wb_in.sel = x"01" then
v.wb_rd_data(7 downto 0) := r.cppr; v.wb_rd_data(7 downto 0) := r.cppr;
elsif wb_in.sel = x"10" then end if;
v.wb_rd_data(39 downto 32) := r.cppr; when XIRR =>
report "XICS XIRR read";
if wb_in.sel = x"f" then
v.wb_rd_data(23 downto 0) := r.xisr;
v.wb_rd_data(31 downto 24) := r.cppr;
xirr_accept_rd := '1';
elsif wb_in.sel = x"1" then
v.wb_rd_data(7 downto 0) := r.cppr;
end if; end if;

when MFRR =>
elsif wb_in.adr = RESV0 then
report "XICS MFRR read"; report "XICS MFRR read";
if wb_in.sel = x"f0" then -- 4 bytes if wb_in.sel = x"f" then -- 4 bytes
v.wb_rd_data(63 downto 56) := r.mfrr; v.wb_rd_data(31 downto 24) := r.mfrr;
elsif wb_in.sel = x"10" then -- 1 byte elsif wb_in.sel = x"1" then -- 1 byte
v.wb_rd_data( 7 downto 0) := r.mfrr; v.wb_rd_data( 7 downto 0) := r.mfrr;
end if; end if;
end if; when others =>
end case;
end if; end if;
end if; end if;



Write Preview
Loading…
Cancel
Save