Makefile: add ecpprog targets

The 0x80000 offset is specific to the OrangeCrab bootloader.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
fpu-constant
Matt Johnston 3 years ago
parent 7761bf8b71
commit 5e90133b61

@ -10,6 +10,7 @@ GHDLSYNTH ?= ghdl.so
YOSYS ?= yosys YOSYS ?= yosys
NEXTPNR ?= nextpnr-ecp5 NEXTPNR ?= nextpnr-ecp5
ECPPACK ?= ecppack ECPPACK ?= ecppack
ECPPROG ?= ecpprog
OPENOCD ?= openocd OPENOCD ?= openocd
VUNITRUN ?= python3 ./run.py VUNITRUN ?= python3 ./run.py
VERILATOR ?= verilator VERILATOR ?= verilator
@ -166,6 +167,7 @@ PACKAGE=CSFBGA285
NEXTPNR_FLAGS=--um5g-85k --freq 48 NEXTPNR_FLAGS=--um5g-85k --freq 48
OPENOCD_JTAG_CONFIG=openocd/olimex-arm-usb-tiny-h.cfg OPENOCD_JTAG_CONFIG=openocd/olimex-arm-usb-tiny-h.cfg
OPENOCD_DEVICE_CONFIG=openocd/LFE5UM5G-85F.cfg OPENOCD_DEVICE_CONFIG=openocd/LFE5UM5G-85F.cfg
ECP_FLASH_OFFSET=0x80000
endif endif


# OrangeCrab with ECP85 (v0.21) # OrangeCrab with ECP85 (v0.21)
@ -180,6 +182,7 @@ OPENOCD_JTAG_CONFIG=openocd/olimex-arm-usb-tiny-h.cfg
OPENOCD_DEVICE_CONFIG=openocd/LFE5U-85F.cfg OPENOCD_DEVICE_CONFIG=openocd/LFE5U-85F.cfg
DFU_VENDOR=1209 DFU_VENDOR=1209
DFU_PRODUCT=5af0 DFU_PRODUCT=5af0
ECP_FLASH_OFFSET=0x80000
endif endif


# ECP5-EVN # ECP5-EVN
@ -244,6 +247,13 @@ microwatt.dfu: microwatt.bit
dfuprog: microwatt.dfu dfuprog: microwatt.dfu
$(DFUUTIL) -a 0 -D $< $(DFUUTIL) -a 0 -D $<


ecpprog: microwatt.bit
$(ECPPROG) -S $<

ecpflash: microwatt.bit
test -n "$(ECP_FLASH_OFFSET)" || (echo Error: No ECP_FLASH_OFFSET defined for target; exit 1)
$(ECPPROG) -o $(ECP_FLASH_OFFSET) $<

tests = $(sort $(patsubst tests/%.out,%,$(wildcard tests/*.out))) tests = $(sort $(patsubst tests/%.out,%,$(wildcard tests/*.out)))
tests_console = $(sort $(patsubst tests/%.console_out,%,$(wildcard tests/*.console_out))) tests_console = $(sort $(patsubst tests/%.console_out,%,$(wildcard tests/*.console_out)))



Loading…
Cancel
Save