Remove sim console

We can force all existing code to use the UART console
by passing 0 in bit zero of the sim config register.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>

decode1.vhdl

@@ -222,9 +222,6 @@ architecture behaviour of decode1 is
 		PPC_XOR        =>       (ALU,    OP_XOR,       RS,         RB,          NONE, RA,   NONE, NONE, NONE, '0', '0', '0', '0', NONE, '0', '0', '0', '0', '0', '0', RC,   '0', '1'),
 		PPC_XORI       =>       (ALU,    OP_XOR,       RS,         CONST_UI,    NONE, RA,   NONE, NONE, NONE, '0', '0', '0', '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'),
 		PPC_XORIS      =>       (ALU,    OP_XOR,       RS,         CONST_UI_HI, NONE, RA,   NONE, NONE, NONE, '0', '0', '0', '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'),
-		PPC_SIM_READ   =>       (ALU,    OP_SIM_READ,  NONE,       NONE,        NONE, RT,   NONE, NONE, NONE, '0', '0', '0', '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'),
-		PPC_SIM_POLL   =>       (ALU,    OP_SIM_POLL,  NONE,       NONE,        NONE, RT,   NONE, NONE, NONE, '0', '0', '0', '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'),
-		PPC_SIM_WRITE  =>       (ALU,    OP_SIM_WRITE, RS,         NONE,        NONE, NONE, NONE, NONE, NONE, '0', '0', '0', '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'),
 		PPC_SIM_CONFIG =>       (ALU,    OP_SIM_CONFIG,NONE,       NONE,        NONE, RT,   NONE, NONE, NONE, '0', '0', '0', '0', NONE, '0', '0', '0', '0', '0', '0', NONE, '0', '1'),
 
 		others => decode_rom_init
@@ -834,15 +831,6 @@ begin
 			elsif std_match(f_in.insn, "011011--------------------------") then
 				report "PPC_xoris";
 				ppc_insn := PPC_XORIS;
-			elsif std_match(f_in.insn, "000001---------------0000000000-") then
-				report "PPC_SIM_READ";
-				ppc_insn := PPC_SIM_READ;
-			elsif std_match(f_in.insn, "000001---------------0000000001-") then
-				report "PPC_SIM_POLL";
-				ppc_insn := PPC_SIM_POLL;
-			elsif std_match(f_in.insn, "000001---------------0000000010-") then
-				report "PPC_SIM_WRITE";
-				ppc_insn := PPC_SIM_WRITE;
 			elsif std_match(f_in.insn, "000001---------------0000000011-") then
 				report "PPC_SIM_CONFIG";
 				ppc_insn := PPC_SIM_CONFIG;

decode_types.vhdl

@@ -37,7 +37,7 @@ package decode_types is
 		PPC_STWCX, PPC_STWU, PPC_STWUX, PPC_STWX, PPC_SUBF, PPC_SUBFC,
 		PPC_SUBFE, PPC_SUBFIC, PPC_SUBFME, PPC_SUBFZE, PPC_SYNC, PPC_TD,
 		PPC_TDI, PPC_TW, PPC_TWI, PPC_XOR, PPC_XORI, PPC_XORIS,
-		PPC_SIM_READ, PPC_SIM_POLL, PPC_SIM_WRITE, PPC_SIM_CONFIG);
+		PPC_SIM_CONFIG);
 
 	type insn_type_t is (OP_ILLEGAL, OP_NOP, OP_ADD, OP_ADDC, OP_ADDEX, OP_ADDME,
 		OP_ADDPCIS, OP_AND, OP_ANDC, OP_ATTN, OP_B, OP_BA, OP_BC,
@@ -59,8 +59,7 @@ package decode_types is
 		OP_RLDIMI, OP_RLWIMI, OP_RLWINM, OP_RLWNM, OP_SETB, OP_SLD,
 		OP_SLW, OP_SRAD, OP_SRADI, OP_SRAW, OP_SRAWI, OP_SRD, OP_SRW,
 		OP_SUBF, OP_SUBFC, OP_SUBFME, OP_SYNC, OP_TD, OP_TDI, OP_TW,
-		OP_TWI, OP_XOR, OP_SIM_READ, OP_SIM_POLL, OP_SIM_WRITE,
+		OP_TWI, OP_XOR, OP_SIM_CONFIG);
-		OP_SIM_CONFIG);
 
 	type input_reg_a_t is (NONE, RA, RA_OR_ZERO, RS);
 	type input_reg_b_t is (NONE, RB, RS, CONST_UI, CONST_SI, CONST_SI_HI, CONST_UI_HI, CONST_LI, CONST_BD, CONST_DS);

execute1.vhdl

@@ -320,33 +320,11 @@ begin
 					result := ppc_xor(e_in.read_data1, e_in.read_data2);
 					result_en := 1;
 
-				-- sim console
-				when OP_SIM_READ =>
-					if SIM = true then
-						sim_console_read(result);
-						result_en := 1;
-					else
-						terminate_out <= '1';
-						report "illegal";
-					end if;
-				when OP_SIM_POLL =>
-					if SIM = true then
-						sim_console_poll(result);
-						result_en := 1;
-					else
-						terminate_out <= '1';
-						report "illegal";
-					end if;
-				when OP_SIM_WRITE =>
-					if SIM = true then
-						sim_console_write(e_in.read_data1);
-					else
-						terminate_out <= '1';
-						report "illegal";
-					end if;
 				when OP_SIM_CONFIG =>
+					-- bit 0 was used to select the microwatt console, which
+					-- we no longer support.
 					if SIM = true then
-						result := x"0000000000000001";
+						result := x"0000000000000000";
 					else
 						result := x"0000000000000000";
 					end if;