core: Reorganize execute1

This breaks up the enormous if .. elsif .. case .. elsif statement in
execute1 in order to try to make it simpler and more understandable.
We now have decode2 deciding whether the instruction has a value to be
written back to a register (GPR, GSPR, FPR, etc.) rather than
individual cases in execute1 setting result_en.  The computation of
the data to be written back is now independent of detection of various
exception conditions.  We now have an if block determining if any
exception condition exists which prevents the next instruction from
being executed, then the case statement which performs actions such as
setting carry/overflow bits, determining if a trap exception exists,
doing branches, etc., then an if statement for all the r.busy = 1
cases (continuing execution of an instruction which was started in a
previous cycle, or writing SRR1 for an interrupt).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
cache-tlb-parameters-2
Paul Mackerras 4 years ago
parent 658feabfd4
commit b0510fd1bb

@ -195,6 +195,7 @@ package common is
insn_type: insn_type_t;
nia: std_ulogic_vector(63 downto 0);
write_reg: gspr_index_t;
write_reg_enable: std_ulogic;
read_reg1: gspr_index_t;
read_reg2: gspr_index_t;
read_data1: std_ulogic_vector(63 downto 0);
@ -232,7 +233,7 @@ package common is
end record;
constant Decode2ToExecute1Init : Decode2ToExecute1Type :=
(valid => '0', unit => NONE, fac => NONE, insn_type => OP_ILLEGAL,
bypass_data1 => '0', bypass_data2 => '0', bypass_data3 => '0',
write_reg_enable => '0', bypass_data1 => '0', bypass_data2 => '0', bypass_data3 => '0',
bypass_cr => '0', lr => '0', rc => '0', oe => '0', invert_a => '0', addm1 => '0',
invert_out => '0', input_carry => ZERO, output_carry => '0', input_cr => '0', output_cr => '0',
is_32bit => '0', is_signed => '0', xerc => xerc_init, reserve => '0', br_pred => '0',

@ -249,7 +249,8 @@ architecture behaviour of decode2 is
OP_MOD => "011",
OP_CNTZ => "100", -- countzero_result
OP_MFSPR => "101", -- spr_result
OP_ISEL => "111", -- misc_result
OP_ADDG6S => "111", -- misc_result
OP_ISEL => "111",
OP_DARN => "111",
OP_MFMSR => "111",
OP_MFCR => "111",
@ -264,6 +265,12 @@ architecture behaviour of decode2 is
OP_DIV => "011",
OP_DIVE => "011",
OP_MOD => "011",
OP_ADDG6S => "001", -- misc_result
OP_ISEL => "010",
OP_DARN => "011",
OP_MFMSR => "100",
OP_MFCR => "101",
OP_SETB => "110",
others => "000"
);

@ -438,6 +445,7 @@ begin
v.e.read_data3 := decoded_reg_c.data;
v.e.bypass_data3 := gpr_c_bypass;
v.e.write_reg := decoded_reg_o.reg;
v.e.write_reg_enable := decoded_reg_o.reg_valid;
v.e.rc := decode_rc(d_in.decode.rc, d_in.insn);
if not (d_in.decode.insn_type = OP_MUL_H32 or d_in.decode.insn_type = OP_MUL_H64) then
v.e.oe := decode_oe(d_in.decode.rc, d_in.insn);
@ -448,7 +456,13 @@ begin
v.e.invert_a := d_in.decode.invert_a;
v.e.addm1 := '0';
if d_in.decode.insn_type = OP_BC or d_in.decode.insn_type = OP_BCREG then
-- add -1 to CTR
v.e.addm1 := '1';
if d_in.insn(23) = '1' or
(d_in.decode.insn_type = OP_BCREG and d_in.insn(10) = '0') then
-- don't write decremented CTR if BO(2) = 1 or bcctr
v.e.write_reg_enable := '0';
end if;
end if;
v.e.invert_out := d_in.decode.invert_out;
v.e.input_carry := d_in.decode.input_carry;
@ -472,7 +486,7 @@ begin
control_valid_in <= d_in.valid;
control_sgl_pipe <= d_in.decode.sgl_pipe;

gpr_write_valid <= decoded_reg_o.reg_valid;
gpr_write_valid <= v.e.write_reg_enable;
gpr_write <= decoded_reg_o.reg;
gpr_bypassable <= '0';
if EX1_BYPASS and d_in.decode.unit = ALU then

@ -53,6 +53,7 @@ end entity execute1;
architecture behaviour of execute1 is
type reg_type is record
e : Execute1ToWritebackType;
cur_instr : Decode2ToExecute1Type;
busy: std_ulogic;
terminate: std_ulogic;
fp_exception_next : std_ulogic;
@ -60,17 +61,10 @@ architecture behaviour of execute1 is
prev_op : insn_type_t;
lr_update : std_ulogic;
next_lr : std_ulogic_vector(63 downto 0);
resmux : std_ulogic_vector(2 downto 0);
submux : std_ulogic_vector(2 downto 0);
mul_in_progress : std_ulogic;
mul_finish : std_ulogic;
div_in_progress : std_ulogic;
cntz_in_progress : std_ulogic;
slow_op_insn : insn_type_t;
slow_op_dest : gpr_index_t;
slow_op_rc : std_ulogic;
slow_op_oe : std_ulogic;
slow_op_xerc : xer_common_t;
last_nia : std_ulogic_vector(63 downto 0);
redirect : std_ulogic;
abs_br : std_ulogic;
@ -82,10 +76,10 @@ architecture behaviour of execute1 is
end record;
constant reg_type_init : reg_type :=
(e => Execute1ToWritebackInit,
cur_instr => Decode2ToExecute1Init,
busy => '0', lr_update => '0', terminate => '0',
fp_exception_next => '0', trace_next => '0', prev_op => OP_ILLEGAL,
mul_in_progress => '0', mul_finish => '0', div_in_progress => '0', cntz_in_progress => '0',
slow_op_insn => OP_ILLEGAL, slow_op_rc => '0', slow_op_oe => '0', slow_op_xerc => xerc_init,
next_lr => (others => '0'), last_nia => (others => '0'),
redirect => '0', abs_br => '0', do_intr => '0', vector => 0,
br_offset => (others => '0'), redir_mode => "0000",
@ -112,6 +106,7 @@ architecture behaviour of execute1 is
signal spr_result: std_ulogic_vector(63 downto 0);
signal result_mux_sel: std_ulogic_vector(2 downto 0);
signal sub_mux_sel: std_ulogic_vector(2 downto 0);
signal current: Decode2ToExecute1Type;

-- multiply signals
signal x_to_multiply: MultiplyInputType;
@ -294,10 +289,10 @@ begin

terminate_out <= r.terminate;

current <= e_in when r.busy = '0' else r.cur_instr;

-- Result mux
result_mux_sel <= e_in.result_sel when r.busy = '0' else r.resmux;
sub_mux_sel <= e_in.sub_select when r.busy = '0' else r.submux;
with result_mux_sel select alu_result <=
with current.result_sel select alu_result <=
adder_result when "000",
logical_result when "001",
rotator_result when "010",
@ -333,9 +328,12 @@ begin
variable a_inv : std_ulogic_vector(63 downto 0);
variable b_or_m1 : std_ulogic_vector(63 downto 0);
variable addg6s : std_ulogic_vector(63 downto 0);
variable isel_result : std_ulogic_vector(63 downto 0);
variable darn : std_ulogic_vector(63 downto 0);
variable mfcr_result : std_ulogic_vector(63 downto 0);
variable setb_result : std_ulogic_vector(63 downto 0);
variable newcrf : std_ulogic_vector(3 downto 0);
variable sum_with_carry : std_ulogic_vector(64 downto 0);
variable result_en : std_ulogic;
variable crnum : crnum_t;
variable crbit : integer range 0 to 31;
variable scrnum : crnum_t;
@ -375,7 +373,6 @@ begin
variable fv : Execute1ToFPUType;
begin
sum_with_carry := (others => '0');
result_en := '0';
newcrf := (others => '0');
is_branch := '0';
taken_branch := '0';
@ -400,7 +397,7 @@ begin
-- (SO, OV[32] and CA[32]) are only modified by instructions that are
-- handled here, we can just forward the result being sent to
-- writeback.
if r.e.write_xerc_enable = '1' then
if r.e.write_xerc_enable = '1' or r.busy = '1' then
v.e.xerc := r.e.xerc;
else
v.e.xerc := e_in.xerc;
@ -422,7 +419,6 @@ begin
v.cntz_in_progress := '0';
v.mul_finish := '0';

misc_result <= (others => '0');
spr_result <= (others => '0');
spr_val := (others => '0');

@ -440,6 +436,8 @@ begin
sum_with_carry := ppc_adde(a_inv, b_or_m1,
decode_input_carry(e_in.input_carry, v.e.xerc));
adder_result <= sum_with_carry(63 downto 0);
carry_32 := sum_with_carry(32) xor a_inv(32) xor b_in(32);
carry_64 := sum_with_carry(64);

-- signals to multiply and divide units
sign1 := '0';
@ -513,7 +511,7 @@ begin
x_to_divider.divisor <= x"00000000" & std_ulogic_vector(abs2(31 downto 0));
end if;

case sub_mux_sel(1 downto 0) is
case current.sub_select(1 downto 0) is
when "00" =>
muldiv_result <= multiply_to_x.result(63 downto 0);
when "01" =>
@ -525,6 +523,117 @@ begin
muldiv_result <= divider_to_x.write_reg_data;
end case;

-- Compute misc_result
case current.sub_select is
when "000" =>
misc_result <= (others => '0');
when "001" =>
-- addg6s
addg6s := (others => '0');
for i in 0 to 14 loop
lo := i * 4;
hi := (i + 1) * 4;
if (a_in(hi) xor b_in(hi) xor sum_with_carry(hi)) = '0' then
addg6s(lo + 3 downto lo) := "0110";
end if;
end loop;
if sum_with_carry(64) = '0' then
addg6s(63 downto 60) := "0110";
end if;
misc_result <= addg6s;
when "010" =>
-- isel
crbit := to_integer(unsigned(insn_bc(e_in.insn)));
if cr_in(31-crbit) = '1' then
isel_result := a_in;
else
isel_result := b_in;
end if;
misc_result <= isel_result;
when "011" =>
-- darn
darn := (others => '1');
if random_err = '0' then
case e_in.insn(17 downto 16) is
when "00" =>
darn := x"00000000" & random_cond(31 downto 0);
when "10" =>
darn := random_raw;
when others =>
darn := random_cond;
end case;
end if;
misc_result <= darn;
when "100" =>
-- mfmsr
misc_result <= ctrl.msr;
when "101" =>
if e_in.insn(20) = '0' then
-- mfcr
mfcr_result := x"00000000" & cr_in;
else
-- mfocrf
crnum := fxm_to_num(insn_fxm(e_in.insn));
mfcr_result := (others => '0');
for i in 0 to 7 loop
lo := (7-i)*4;
hi := lo + 3;
if crnum = i then
mfcr_result(hi downto lo) := cr_in(hi downto lo);
end if;
end loop;
end if;
misc_result <= mfcr_result;
when "110" =>
-- setb
bfa := insn_bfa(e_in.insn);
crbit := to_integer(unsigned(bfa)) * 4;
setb_result := (others => '0');
if cr_in(31 - crbit) = '1' then
setb_result := (others => '1');
elsif cr_in(30 - crbit) = '1' then
setb_result(0) := '1';
end if;
misc_result <= setb_result;
when others =>
misc_result <= (others => '0');
end case;

-- compute comparison results
-- Note, we have done RB - RA, not RA - RB
if e_in.insn_type = OP_CMP then
l := insn_l(e_in.insn);
else
l := not e_in.is_32bit;
end if;
zerolo := not (or (a_in(31 downto 0) xor b_in(31 downto 0)));
zerohi := not (or (a_in(63 downto 32) xor b_in(63 downto 32)));
if zerolo = '1' and (l = '0' or zerohi = '1') then
-- values are equal
trapval := "00100";
else
if l = '1' then
-- 64-bit comparison
msb_a := a_in(63);
msb_b := b_in(63);
else
-- 32-bit comparison
msb_a := a_in(31);
msb_b := b_in(31);
end if;
if msb_a /= msb_b then
-- Subtraction might overflow, but
-- comparison is clear from MSB difference.
-- for signed, 0 is greater; for unsigned, 1 is greater
trapval := msb_a & msb_b & '0' & msb_b & msb_a;
else
-- Subtraction cannot overflow since MSBs are equal.
-- carry = 1 indicates RA is smaller (signed or unsigned)
a_lt := (not l and carry_32) or (l and carry_64);
trapval := a_lt & not a_lt & '0' & a_lt & not a_lt;
end if;
end if;

ctrl_tmp <= ctrl;
-- FIXME: run at 512MHz not core freq
ctrl_tmp.tb <= std_ulogic_vector(unsigned(ctrl.tb) + 1);
@ -577,38 +686,20 @@ begin
v.prev_op := e_in.insn_type;
end if;

if ctrl.irq_state = WRITE_SRR1 then
v.e.exc_write_reg := fast_spr_num(SPR_SRR1);
v.e.exc_write_data := ctrl.srr1;
v.e.exc_write_enable := '1';
ctrl_tmp.msr(MSR_SF) <= '1';
ctrl_tmp.msr(MSR_EE) <= '0';
ctrl_tmp.msr(MSR_PR) <= '0';
ctrl_tmp.msr(MSR_SE) <= '0';
ctrl_tmp.msr(MSR_BE) <= '0';
ctrl_tmp.msr(MSR_FP) <= '0';
ctrl_tmp.msr(MSR_FE0) <= '0';
ctrl_tmp.msr(MSR_FE1) <= '0';
ctrl_tmp.msr(MSR_IR) <= '0';
ctrl_tmp.msr(MSR_DR) <= '0';
ctrl_tmp.msr(MSR_RI) <= '0';
ctrl_tmp.msr(MSR_LE) <= '1';
v.e.valid := '1';
v.trace_next := '0';
v.fp_exception_next := '0';
report "Writing SRR1: " & to_hstring(ctrl.srr1);

elsif valid_in = '1' and e_in.second = '0' and
((HAS_FPU and r.fp_exception_next = '1') or r.trace_next = '1') then
-- Determine if there is any exception to be taken
-- before/instead of executing this instruction
if valid_in = '1' and e_in.second = '0' then
if HAS_FPU and r.fp_exception_next = '1' then
-- This is used for FP-type program interrupts that
-- become pending due to MSR[FE0,FE1] changing from 00 to non-zero.
exception := '1';
v.vector := 16#700#;
ctrl_tmp.srr1(63 - 43) <= '1';
ctrl_tmp.srr1(63 - 47) <= '1';
else
elsif r.trace_next = '1' then
-- Generate a trace interrupt rather than executing the next instruction
-- or taking any asynchronous interrupt
exception := '1';
v.vector := 16#d00#;
ctrl_tmp.srr1(63 - 33) <= '1';
if r.prev_op = OP_LOAD or r.prev_op = OP_ICBI or r.prev_op = OP_ICBT or
@ -617,18 +708,13 @@ begin
elsif r.prev_op = OP_STORE or r.prev_op = OP_DCBZ or r.prev_op = OP_DCBTST then
ctrl_tmp.srr1(63 - 36) <= '1';
end if;
end if;
exception := '1';

elsif irq_valid = '1' and valid_in = '1' and e_in.second = '0' then
-- we need two cycles to write srr0 and 1
-- will need more when we have to write HEIR
elsif irq_valid = '1' then
-- Don't deliver the interrupt until we have a valid instruction
-- coming in, so we have a valid NIA to put in SRR0.
exception := '1';

elsif valid_in = '1' and ctrl.msr(MSR_PR) = '1' and
instr_is_privileged(e_in.insn_type, e_in.insn) then
elsif ctrl.msr(MSR_PR) = '1' and instr_is_privileged(e_in.insn_type, e_in.insn) then
-- generate a program interrupt
exception := '1';
v.vector := 16#700#;
@ -636,29 +722,24 @@ begin
ctrl_tmp.srr1(63 - 45) <= '1';
report "privileged instruction";

elsif not HAS_FPU and valid_in = '1' and e_in.fac = FPU then
elsif not HAS_FPU and e_in.fac = FPU then
-- make lfd/stfd/lfs/stfs etc. illegal in no-FPU implementations
illegal := '1';

elsif HAS_FPU and valid_in = '1' and ctrl.msr(MSR_FP) = '0' and e_in.fac = FPU then
elsif HAS_FPU and ctrl.msr(MSR_FP) = '0' and e_in.fac = FPU then
-- generate a floating-point unavailable interrupt
exception := '1';
v.vector := 16#800#;
report "FP unavailable interrupt";
end if;
end if;

elsif valid_in = '1' and e_in.unit = ALU then

if valid_in = '1' and exception = '0' and illegal = '0' and e_in.unit = ALU then
report "execute nia " & to_hstring(e_in.nia);

v.cur_instr := e_in;
v.next_lr := next_nia;
v.e.valid := '1';
v.e.write_reg := e_in.write_reg;
v.slow_op_insn := e_in.insn_type;
v.slow_op_dest := gspr_to_gpr(e_in.write_reg);
v.slow_op_rc := e_in.rc;
v.slow_op_oe := e_in.oe;
v.slow_op_xerc := v.e.xerc;
v.resmux := e_in.result_sel;
v.submux := e_in.sub_select;

case_0: case e_in.insn_type is

@ -689,10 +770,7 @@ begin
end if;
when OP_NOP | OP_DCBF | OP_DCBST | OP_DCBT | OP_DCBTST | OP_ICBT =>
-- Do nothing
when OP_ADD | OP_CMP | OP_TRAP =>
carry_32 := sum_with_carry(32) xor a_inv(32) xor b_in(32);
carry_64 := sum_with_carry(64);
if e_in.insn_type = OP_ADD then
when OP_ADD =>
if e_in.output_carry = '1' then
if e_in.input_carry /= OV then
set_carry(v.e, carry_32, carry_64);
@ -707,43 +785,8 @@ begin
calc_ov(a_inv(63), b_in(63), carry_64, sum_with_carry(63)),
calc_ov(a_inv(31), b_in(31), carry_32, sum_with_carry(31)));
end if;
result_en := '1';
else
-- trap, CMP and CMPL instructions
-- Note, we have done RB - RA, not RA - RB
if e_in.insn_type = OP_CMP then
l := insn_l(e_in.insn);
else
l := not e_in.is_32bit;
end if;
zerolo := not (or (a_in(31 downto 0) xor b_in(31 downto 0)));
zerohi := not (or (a_in(63 downto 32) xor b_in(63 downto 32)));
if zerolo = '1' and (l = '0' or zerohi = '1') then
-- values are equal
trapval := "00100";
else
if l = '1' then
-- 64-bit comparison
msb_a := a_in(63);
msb_b := b_in(63);
else
-- 32-bit comparison
msb_a := a_in(31);
msb_b := b_in(31);
end if;
if msb_a /= msb_b then
-- Subtraction might overflow, but
-- comparison is clear from MSB difference.
-- for signed, 0 is greater; for unsigned, 1 is greater
trapval := msb_a & msb_b & '0' & msb_b & msb_a;
else
-- Subtraction cannot overflow since MSBs are equal.
-- carry = 1 indicates RA is smaller (signed or unsigned)
a_lt := (not l and carry_32) or (l and carry_64);
trapval := a_lt & not a_lt & '0' & a_lt & not a_lt;
end if;
end if;
if e_in.insn_type = OP_CMP then
when OP_CMP =>
-- CMP and CMPL instructions
if e_in.is_signed = '1' then
newcrf := trapval(4 downto 2) & v.e.xerc.so;
else
@ -758,7 +801,7 @@ begin
hi := lo + 3;
v.e.write_cr_data(hi downto lo) := newcrf;
end loop;
else
when OP_TRAP =>
-- trap instructions (tw, twi, td, tdi)
v.vector := 16#700#;
-- set bit 46 to say trap occurred
@ -768,22 +811,7 @@ begin
exception := '1';
report "trap";
end if;
end if;
end if;
when OP_ADDG6S =>
addg6s := (others => '0');
for i in 0 to 14 loop
lo := i * 4;
hi := (i + 1) * 4;
if (a_in(hi) xor b_in(hi) xor sum_with_carry(hi)) = '0' then
addg6s(lo + 3 downto lo) := "0110";
end if;
end loop;
if sum_with_carry(64) = '0' then
addg6s(63 downto 60) := "0110";
end if;
misc_result <= addg6s;
result_en := '1';
when OP_CMPRB =>
newcrf := ppc_cmprb(a_in, b_in, insn_l(e_in.insn));
bf := insn_bf(e_in.insn);
@ -802,7 +830,6 @@ begin
newcrf & newcrf & newcrf & newcrf;
when OP_AND | OP_OR | OP_XOR | OP_POPCNT | OP_PRTY | OP_CMPB | OP_EXTS |
OP_BPERM | OP_BCD =>
result_en := '1';
when OP_B =>
is_branch := '1';
taken_branch := '1';
@ -812,12 +839,8 @@ begin
end if;
when OP_BC =>
-- read_data1 is CTR
v.e.write_reg := fast_spr_num(SPR_CTR);
bo := insn_bo(e_in.insn);
bi := insn_bi(e_in.insn);
if bo(4-2) = '0' then
result_en := '1';
end if;
is_branch := '1';
taken_branch := ppc_bc_taken(bo, bi, cr_in, a_in);
abs_branch := insn_aa(e_in.insn);
@ -827,12 +850,8 @@ begin
when OP_BCREG =>
-- read_data1 is CTR
-- read_data2 is target register (CTR, LR or TAR)
v.e.write_reg := fast_spr_num(SPR_CTR);
bo := insn_bo(e_in.insn);
bi := insn_bi(e_in.insn);
if bo(4-2) = '0' and e_in.insn(10) = '0' then
result_en := '1';
end if;
is_branch := '1';
taken_branch := ppc_bc_taken(bo, bi, cr_in, a_in);
abs_branch := '1';
@ -868,13 +887,6 @@ begin
v.cntz_in_progress := '1';
v.busy := '1';
when OP_ISEL =>
crbit := to_integer(unsigned(insn_bc(e_in.insn)));
if cr_in(31-crbit) = '1' then
misc_result <= a_in;
else
misc_result <= b_in;
end if;
result_en := '1';
when OP_CROP =>
cr_op := insn_cr(e_in.insn);
report "CR OP " & to_hstring(cr_op);
@ -927,27 +939,11 @@ begin
v.e.write_cr_data := newcrf & newcrf & newcrf & newcrf &
newcrf & newcrf & newcrf & newcrf;
when OP_DARN =>
if random_err = '0' then
case e_in.insn(17 downto 16) is
when "00" =>
misc_result <= x"00000000" & random_cond(31 downto 0);
when "10" =>
misc_result <= random_raw;
when others =>
misc_result <= random_cond;
end case;
else
misc_result <= (others => '1');
end if;
result_en := '1';
when OP_MFMSR =>
misc_result <= ctrl.msr;
result_en := '1';
when OP_MFSPR =>
report "MFSPR to SPR " & integer'image(decode_spr_num(e_in.insn)) &
"=" & to_hstring(a_in);
result_en := '1';
if is_fast_spr(e_in.read_reg1) then
if is_fast_spr(e_in.read_reg1) = '1' then
spr_val := a_in;
if decode_spr_num(e_in.insn) = SPR_XER then
-- bits 0:31 and 35:43 are treated as reserved and return 0s when read using mfxer
@ -982,7 +978,7 @@ begin
when others =>
-- mfspr from unimplemented SPRs should be a nop in
-- supervisor mode and a program interrupt for user mode
if ctrl.msr(MSR_PR) = '1' then
if is_fast_spr(e_in.read_reg1) = '0' and ctrl.msr(MSR_PR) = '1' then
illegal := '1';
end if;
end case;
@ -990,22 +986,6 @@ begin
spr_result <= spr_val;

when OP_MFCR =>
if e_in.insn(20) = '0' then
-- mfcr
misc_result <= x"00000000" & cr_in;
else
-- mfocrf
crnum := fxm_to_num(insn_fxm(e_in.insn));
misc_result <= (others => '0');
for i in 0 to 7 loop
lo := (7-i)*4;
hi := lo + 3;
if crnum = i then
misc_result(hi downto lo) <= cr_in(hi downto lo);
end if;
end loop;
end if;
result_en := '1';
when OP_MTCRF =>
v.e.write_cr_enable := '1';
if e_in.insn(20) = '0' then
@ -1045,7 +1025,6 @@ begin
report "MTSPR to SPR " & integer'image(decode_spr_num(e_in.insn)) &
"=" & to_hstring(c_in);
if is_fast_spr(e_in.write_reg) then
result_en := '1';
if decode_spr_num(e_in.insn) = SPR_XER then
v.e.xerc.so := c_in(63-32);
v.e.xerc.ov := c_in(63-33);
@ -1073,16 +1052,7 @@ begin
if e_in.output_carry = '1' then
set_carry(v.e, rotator_carry, rotator_carry);
end if;
result_en := '1';
when OP_SETB =>
bfa := insn_bfa(e_in.insn);
crbit := to_integer(unsigned(bfa)) * 4;
misc_result <= (others => '0');
if cr_in(31 - crbit) = '1' then
misc_result <= (others => '1');
elsif cr_in(30 - crbit) = '1' then
misc_result(0) <= '1';
end if;

when OP_ISYNC =>
v.redirect := '1';
@ -1108,8 +1078,6 @@ begin
report "illegal";
end case;

v.e.rc := e_in.rc and valid_in;

-- Mispredicted branches cause a redirect
if is_branch = '1' then
if taken_branch = '1' then
@ -1126,26 +1094,7 @@ begin
end if;
end if;

-- Update LR on the next cycle after a branch link
-- If we're not writing back anything else, we can write back LR
-- this cycle, otherwise we take an extra cycle. We use the
-- exc_write path since next_nia is written through that path
-- in other places.
if e_in.lr = '1' then
if result_en = '0' then
v.e.exc_write_enable := '1';
v.e.exc_write_data := next_nia;
v.e.exc_write_reg := fast_spr_num(SPR_LR);
else
v.lr_update := '1';
v.next_lr := next_nia;
v.e.valid := '0';
report "Delayed LR update to " & to_hstring(next_nia);
v.busy := '1';
end if;
end if;

elsif valid_in = '1' then
elsif valid_in = '1' and exception = '0' and illegal = '0' then
-- instruction for other units, i.e. LDST
if e_in.unit = LDST then
lv.valid := '1';
@ -1164,23 +1113,28 @@ begin
-- valid_in = 0. Hence they don't happen in the same cycle as any of
-- the cases above which depend on valid_in = 1.

if r.redirect = '1' then
v.e.valid := '1';
end if;
if r.lr_update = '1' then
if ctrl.irq_state = WRITE_SRR1 then
v.e.exc_write_reg := fast_spr_num(SPR_SRR1);
v.e.exc_write_data := ctrl.srr1;
v.e.exc_write_enable := '1';
v.e.exc_write_data := r.next_lr;
v.e.exc_write_reg := fast_spr_num(SPR_LR);
v.e.valid := '1';
-- Keep r.e.write_data unchanged next cycle in case it is needed
-- for a forwarded result (e.g. for CTR).
hold_wr_data := '1';
ctrl_tmp.msr(MSR_SF) <= '1';
ctrl_tmp.msr(MSR_EE) <= '0';
ctrl_tmp.msr(MSR_PR) <= '0';
ctrl_tmp.msr(MSR_SE) <= '0';
ctrl_tmp.msr(MSR_BE) <= '0';
ctrl_tmp.msr(MSR_FP) <= '0';
ctrl_tmp.msr(MSR_FE0) <= '0';
ctrl_tmp.msr(MSR_FE1) <= '0';
ctrl_tmp.msr(MSR_IR) <= '0';
ctrl_tmp.msr(MSR_DR) <= '0';
ctrl_tmp.msr(MSR_RI) <= '0';
ctrl_tmp.msr(MSR_LE) <= '1';
v.trace_next := '0';
v.fp_exception_next := '0';
report "Writing SRR1: " & to_hstring(ctrl.srr1);

elsif r.cntz_in_progress = '1' then
-- cnt[lt]z always takes two cycles
result_en := '1';
v.e.write_reg := gpr_to_gspr(r.slow_op_dest);
v.e.rc := r.slow_op_rc;
v.e.xerc := r.slow_op_xerc;
v.e.valid := '1';
elsif r.mul_in_progress = '1' or r.div_in_progress = '1' then
if (r.mul_in_progress = '1' and multiply_to_x.valid = '1') or
@ -1190,23 +1144,21 @@ begin
else
overflow := divider_to_x.overflow;
end if;
if r.mul_in_progress = '1' and r.slow_op_oe = '1' then
if r.mul_in_progress = '1' and current.oe = '1' then
-- have to wait until next cycle for overflow indication
v.mul_finish := '1';
v.busy := '1';
else
result_en := '1';
v.e.write_reg := gpr_to_gspr(r.slow_op_dest);
v.e.rc := r.slow_op_rc;
v.e.xerc := r.slow_op_xerc;
v.e.write_xerc_enable := r.slow_op_oe;
v.e.write_xerc_enable := current.oe;
-- We must test oe because the RC update code in writeback
-- will use the xerc value to set CR0:SO so we must not clobber
-- xerc if OE wasn't set.
if r.slow_op_oe = '1' then
if current.oe = '1' then
v.e.xerc.ov := overflow;
v.e.xerc.ov32 := overflow;
v.e.xerc.so := r.slow_op_xerc.so or overflow;
if overflow = '1' then
v.e.xerc.so := '1';
end if;
end if;
v.e.valid := '1';
end if;
@ -1217,16 +1169,19 @@ begin
end if;
elsif r.mul_finish = '1' then
hold_wr_data := '1';
result_en := '1';
v.e.write_reg := gpr_to_gspr(r.slow_op_dest);
v.e.rc := r.slow_op_rc;
v.e.xerc := r.slow_op_xerc;
v.e.write_xerc_enable := r.slow_op_oe;
v.e.write_xerc_enable := current.oe;
v.e.xerc.ov := multiply_to_x.overflow;
v.e.xerc.ov32 := multiply_to_x.overflow;
v.e.xerc.so := r.slow_op_xerc.so or multiply_to_x.overflow;
if multiply_to_x.overflow = '1' then
v.e.xerc.so := '1';
end if;
v.e.valid := '1';
end if;
-- When doing delayed LR update, keep r.e.write_data unchanged
-- next cycle in case it is needed for a forwarded result (e.g. CTR).
if r.lr_update = '1' then
hold_wr_data := '1';
end if;

-- Generate FP-type program interrupt. fp_in.interrupt will only
-- be set during the execution of a FP instruction.
@ -1253,17 +1208,6 @@ begin
end if;
end if;

if do_trace = '1' then
v.trace_next := '1';
end if;

if hold_wr_data = '0' then
v.e.write_data := alu_result;
else
v.e.write_data := r.e.write_data;
end if;
v.e.write_enable := result_en and not exception;

-- generate DSI or DSegI for load/store exceptions
-- or ISI or ISegI for instruction fetch exceptions
if l_in.exception = '1' then
@ -1297,10 +1241,52 @@ begin
v.do_intr := '1';
end if;

if do_trace = '1' then
v.trace_next := '1';
end if;

if hold_wr_data = '0' then
v.e.write_data := alu_result;
else
v.e.write_data := r.e.write_data;
end if;
v.e.write_reg := current.write_reg;
v.e.write_enable := current.write_reg_enable and v.e.valid and not exception;
v.e.rc := current.rc and v.e.valid and not exception;

-- Update LR on the next cycle after a branch link
-- If we're not writing back anything else, we can write back LR
-- this cycle, otherwise we take an extra cycle. We use the
-- exc_write path since next_nia is written through that path
-- in other places.
if v.e.valid = '1' and exception = '0' and current.lr = '1' then
if current.write_reg_enable = '0' then
v.e.exc_write_enable := '1';
v.e.exc_write_data := next_nia;
v.e.exc_write_reg := fast_spr_num(SPR_LR);
else
v.lr_update := '1';
v.e.valid := '0';
report "Delayed LR update to " & to_hstring(next_nia);
v.busy := '1';
end if;
end if;
if r.lr_update = '1' then
v.e.exc_write_enable := '1';
v.e.exc_write_data := r.next_lr;
v.e.exc_write_reg := fast_spr_num(SPR_LR);
v.e.valid := '1';
end if;

-- Defer completion for one cycle when redirecting.
-- This also ensures r.busy = 1 when ctrl.irq_state = WRITE_SRR1
if v.redirect = '1' then
v.busy := '1';
v.e.valid := '0';
end if;
if r.redirect = '1' then
v.e.valid := '1';
end if;

-- Outputs to fetch1
f.redirect := r.redirect;

Loading…
Cancel
Save