loadstore1: Generate alignment interrupts for unaligned larx/stcx

Load-and-reserve and store-conditional instructions are required to
generate an alignment interrupt (0x600 vector) if their EA is not
aligned.  Implement this.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
jtag-port
Paul Mackerras 4 years ago
parent 371fd4cc20
commit eee90a0815

@ -286,6 +286,7 @@ package common is
type Loadstore1ToExecute1Type is record type Loadstore1ToExecute1Type is record
busy : std_ulogic; busy : std_ulogic;
exception : std_ulogic; exception : std_ulogic;
alignment : std_ulogic;
invalid : std_ulogic; invalid : std_ulogic;
perm_error : std_ulogic; perm_error : std_ulogic;
rc_error : std_ulogic; rc_error : std_ulogic;

@ -1139,7 +1139,9 @@ begin
-- generate DSI or DSegI for load/store exceptions -- generate DSI or DSegI for load/store exceptions
-- or ISI or ISegI for instruction fetch exceptions -- or ISI or ISegI for instruction fetch exceptions
if l_in.exception = '1' then if l_in.exception = '1' then
if l_in.instr_fault = '0' then if l_in.alignment = '1' then
v.f.redirect_nia := std_logic_vector(to_unsigned(16#600#, 64));
elsif l_in.instr_fault = '0' then
if l_in.segment_fault = '0' then if l_in.segment_fault = '0' then
v.f.redirect_nia := std_logic_vector(to_unsigned(16#300#, 64)); v.f.redirect_nia := std_logic_vector(to_unsigned(16#300#, 64));
else else

@ -78,6 +78,7 @@ architecture behave of loadstore1 is
dar : std_ulogic_vector(63 downto 0); dar : std_ulogic_vector(63 downto 0);
dsisr : std_ulogic_vector(31 downto 0); dsisr : std_ulogic_vector(31 downto 0);
instr_fault : std_ulogic; instr_fault : std_ulogic;
align_intr : std_ulogic;
sprval : std_ulogic_vector(63 downto 0); sprval : std_ulogic_vector(63 downto 0);
busy : std_ulogic; busy : std_ulogic;
wait_dcache : std_ulogic; wait_dcache : std_ulogic;
@ -171,6 +172,7 @@ begin
variable dsisr : std_ulogic_vector(31 downto 0); variable dsisr : std_ulogic_vector(31 downto 0);
variable mmu_mtspr : std_ulogic; variable mmu_mtspr : std_ulogic;
variable itlb_fault : std_ulogic; variable itlb_fault : std_ulogic;
variable misaligned : std_ulogic;
begin begin
v := r; v := r;
req := '0'; req := '0';
@ -358,6 +360,7 @@ begin
when TLBIE_WAIT => when TLBIE_WAIT =>


when COMPLETE => when COMPLETE =>
exception := r.align_intr;


end case; end case;


@ -374,6 +377,7 @@ begin
v.dcbz := '0'; v.dcbz := '0';
v.tlbie := '0'; v.tlbie := '0';
v.instr_fault := '0'; v.instr_fault := '0';
v.align_intr := '0';
v.dwords_done := '0'; v.dwords_done := '0';
v.last_dword := '1'; v.last_dword := '1';
v.write_reg := l_in.write_reg; v.write_reg := l_in.write_reg;
@ -411,6 +415,10 @@ begin
v.first_bytes := byte_sel; v.first_bytes := byte_sel;
v.second_bytes := long_sel(15 downto 8); v.second_bytes := long_sel(15 downto 8);


-- check alignment for larx/stcx
misaligned := or (std_ulogic_vector(unsigned(l_in.length(2 downto 0)) - 1) and addr(2 downto 0));
v.align_intr := l_in.reserve and misaligned;

case l_in.op is case l_in.op is
when OP_STORE => when OP_STORE =>
req := '1'; req := '1';
@ -420,6 +428,7 @@ begin
-- Allow an extra cycle for RA update on loads -- Allow an extra cycle for RA update on loads
v.extra_cycle := l_in.update; v.extra_cycle := l_in.update;
when OP_DCBZ => when OP_DCBZ =>
v.align_intr := v.nc;
req := '1'; req := '1';
v.dcbz := '1'; v.dcbz := '1';
when OP_TLBIE => when OP_TLBIE =>
@ -468,7 +477,9 @@ begin
end case; end case;


if req = '1' then if req = '1' then
if long_sel(15 downto 8) = "00000000" then if v.align_intr = '1' then
v.state := COMPLETE;
elsif long_sel(15 downto 8) = "00000000" then
v.state := ACK_WAIT; v.state := ACK_WAIT;
else else
v.state := SECOND_REQ; v.state := SECOND_REQ;
@ -479,7 +490,7 @@ begin
end if; end if;


-- Update outputs to dcache -- Update outputs to dcache
d_out.valid <= req; d_out.valid <= req and not v.align_intr;
d_out.load <= v.load; d_out.load <= v.load;
d_out.dcbz <= v.dcbz; d_out.dcbz <= v.dcbz;
d_out.nc <= v.nc; d_out.nc <= v.nc;
@ -526,6 +537,7 @@ begin
-- update exception info back to execute1 -- update exception info back to execute1
e_out.busy <= busy; e_out.busy <= busy;
e_out.exception <= exception; e_out.exception <= exception;
e_out.alignment <= r.align_intr;
e_out.instr_fault <= r.instr_fault; e_out.instr_fault <= r.instr_fault;
e_out.invalid <= m_in.invalid; e_out.invalid <= m_in.invalid;
e_out.badtree <= m_in.badtree; e_out.badtree <= m_in.badtree;
@ -534,7 +546,7 @@ begin
e_out.segment_fault <= m_in.segerr; e_out.segment_fault <= m_in.segerr;
if exception = '1' and r.instr_fault = '0' then if exception = '1' and r.instr_fault = '0' then
v.dar := addr; v.dar := addr;
if m_in.segerr = '0' then if m_in.segerr = '0' and r.align_intr = '0' then
v.dsisr := dsisr; v.dsisr := dsisr;
end if; end if;
end if; end if;

Loading…
Cancel
Save