You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/core.vhdl

499 lines
16 KiB
VHDL

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library work;
use work.common.all;
use work.wishbone_types.all;
entity core is
generic (
SIM : boolean := false;
DISABLE_FLATTEN : boolean := false;
EX1_BYPASS : boolean := true;
HAS_FPU : boolean := true;
fetch1: Implement a simple branch target cache This implements a cache in fetch1, where each entry stores the address of a simple branch instruction (b or bc) and the target of the branch. When fetching sequentially, if the address being fetched matches the cache entry, then fetching will be redirected to the branch target. The cache has 1024 entries and is direct-mapped, i.e. indexed by bits 11..2 of the NIA. The bus from execute1 now carries information about taken and not-taken simple branches, which fetch1 uses to update the cache. The cache entry is updated for both taken and not-taken branches, with the valid bit being set if the branch was taken and cleared if the branch was not taken. If fetching is redirected to the branch target then that goes down the pipe as a predicted-taken branch, and decode1 does not do any static branch prediction. If fetching is not redirected, then the next instruction goes down the pipe as normal and decode1 does its static branch prediction. In order to make timing, the lookup of the cache is pipelined, so on each cycle the cache entry for the current NIA + 8 is read. This means that after a redirect (from decode1 or execute1), only the third and subsequent sequentially-fetched instructions will be able to be predicted. This improves the coremark value on the Arty A7-100 from about 180 to about 190 (more than 5%). The BTC is optional. Builds for the Artix 7 35-T part have it off by default because the extra ~1420 LUTs it takes mean that the design doesn't fit on the Arty A7-35 board. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
HAS_BTC : boolean := true;
HAS_SHORT_MULT : boolean := false;
ALT_RESET_ADDRESS : std_ulogic_vector(63 downto 0) := (others => '0');
LOG_LENGTH : natural := 512;
ICACHE_NUM_LINES : natural := 64;
ICACHE_NUM_WAYS : natural := 2;
ICACHE_TLB_SIZE : natural := 64;
DCACHE_NUM_LINES : natural := 64;
DCACHE_NUM_WAYS : natural := 2;
DCACHE_TLB_SET_SIZE : natural := 64;
DCACHE_TLB_NUM_WAYS : natural := 2
);
port (
clk : in std_ulogic;
rst : in std_ulogic;
-- Alternate reset (0xffff0000) for use by DRAM init fw
alt_reset : in std_ulogic;
-- Wishbone interface
wishbone_insn_in : in wishbone_slave_out;
wishbone_insn_out : out wishbone_master_out;
wishbone_data_in : in wishbone_slave_out;
wishbone_data_out : out wishbone_master_out;
wb_snoop_in : in wishbone_master_out;
dmi_addr : in std_ulogic_vector(3 downto 0);
dmi_din : in std_ulogic_vector(63 downto 0);
dmi_dout : out std_ulogic_vector(63 downto 0);
dmi_req : in std_ulogic;
dmi_wr : in std_ulogic;
dmi_ack : out std_ulogic;
ext_irq : in std_ulogic;
terminated_out : out std_logic
);
end core;
architecture behave of core is
-- icache signals
signal fetch1_to_icache : Fetch1ToIcacheType;
signal writeback_to_fetch1: WritebackToFetch1Type;
signal icache_to_decode1 : IcacheToDecode1Type;
Add TLB to icache This adds a direct-mapped TLB to the icache, with 64 entries by default. Execute1 now sends a "virt_mode" signal from MSR[IR] to fetch1 along with redirects to indicate whether instruction addresses should be translated through the TLB, and fetch1 sends that on to icache. Similarly a "priv_mode" signal is sent to indicate the privilege mode for instruction fetches. This means that changes to MSR[IR] or MSR[PR] don't take effect until the next redirect, meaning an isync, rfid, branch, etc. The icache uses a hash of the effective address (i.e. next instruction address) to index the TLB. The hash is an XOR of three fields of the address; with a 64-entry TLB, the fields are bits 12--17, 18--23 and 24--29 of the address. TLB invalidations simply invalidate the indexed TLB entry without checking the contents. If the icache detects a TLB miss with virt_mode=1, it will send a fetch_failed indication through fetch2 to decode1, which will turn it into a special OP_FETCH_FAILED opcode with unit=LDST. That will get sent down to loadstore1 which will currently just raise a Instruction Storage Interrupt (0x400) exception. One bit in the PTE obtained from the TLB is used to check whether an instruction access is allowed -- the privilege bit (bit 3). If bit 3 is 1 and priv_mode=0, then a fetch_failed indication is sent down to fetch2 and to decode1, which generates an OP_FETCH_FAILED. Any PTEs with PTE bit 0 (EAA[3]) clear or bit 8 (R) clear should not be put into the iTLB since such PTEs would not allow execution by any context. Tlbie operations get sent from mmu to icache over a new connection. Unfortunately the privileged instruction tests are broken for now. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
signal mmu_to_icache : MmuToIcacheType;
-- decode signals
signal decode1_to_decode2: Decode1ToDecode2Type;
signal decode1_to_fetch1: Decode1ToFetch1Type;
signal decode2_to_execute1: Decode2ToExecute1Type;
-- register file signals
signal register_file_to_decode2: RegisterFileToDecode2Type;
signal decode2_to_register_file: Decode2ToRegisterFileType;
signal writeback_to_register_file: WritebackToRegisterFileType;
-- CR file signals
signal decode2_to_cr_file: Decode2ToCrFileType;
signal cr_file_to_decode2: CrFileToDecode2Type;
signal writeback_to_cr_file: WritebackToCrFileType;
-- execute signals
signal execute1_to_writeback: Execute1ToWritebackType;
signal execute1_bypass: bypass_data_t;
signal execute1_cr_bypass: cr_bypass_data_t;
-- load store signals
signal execute1_to_loadstore1: Execute1ToLoadstore1Type;
signal loadstore1_to_execute1: Loadstore1ToExecute1Type;
signal loadstore1_to_writeback: Loadstore1ToWritebackType;
signal loadstore1_to_mmu: Loadstore1ToMmuType;
signal mmu_to_loadstore1: MmuToLoadstore1Type;
-- dcache signals
signal loadstore1_to_dcache: Loadstore1ToDcacheType;
signal dcache_to_loadstore1: DcacheToLoadstore1Type;
signal mmu_to_dcache: MmuToDcacheType;
signal dcache_to_mmu: DcacheToMmuType;
-- FPU signals
signal execute1_to_fpu: Execute1ToFPUType;
signal fpu_to_execute1: FPUToExecute1Type;
signal fpu_to_writeback: FPUToWritebackType;
-- local signals
signal fetch1_stall_in : std_ulogic;
signal icache_stall_out : std_ulogic;
signal icache_stall_in : std_ulogic;
signal decode1_stall_in : std_ulogic;
signal decode1_busy : std_ulogic;
signal decode2_busy_in : std_ulogic;
signal decode2_stall_out : std_ulogic;
signal ex1_icache_inval: std_ulogic;
signal ex1_busy_out: std_ulogic;
signal dcache_stall_out: std_ulogic;
signal flush: std_ulogic;
signal decode1_flush: std_ulogic;
signal fetch1_flush: std_ulogic;
signal complete: instr_tag_t;
signal terminate: std_ulogic;
signal core_rst: std_ulogic;
signal icache_inv: std_ulogic;
signal do_interrupt: std_ulogic;
-- Delayed/Latched resets and alt_reset
signal rst_fetch1 : std_ulogic;
signal rst_fetch2 : std_ulogic;
signal rst_icache : std_ulogic;
signal rst_dcache : std_ulogic;
signal rst_dec1 : std_ulogic;
signal rst_dec2 : std_ulogic;
signal rst_ex1 : std_ulogic;
signal rst_fpu : std_ulogic;
signal rst_ls1 : std_ulogic;
signal rst_wback : std_ulogic;
signal rst_dbg : std_ulogic;
signal alt_reset_d : std_ulogic;
signal sim_cr_dump: std_ulogic;
-- Debug actions
signal dbg_core_stop: std_ulogic;
signal dbg_core_rst: std_ulogic;
signal dbg_icache_rst: std_ulogic;
signal dbg_gpr_req : std_ulogic;
signal dbg_gpr_ack : std_ulogic;
signal dbg_gpr_addr : gspr_index_t;
signal dbg_gpr_data : std_ulogic_vector(63 downto 0);
signal msr : std_ulogic_vector(63 downto 0);
-- PMU event bus
signal icache_events : IcacheEventType;
signal loadstore_events : Loadstore1EventType;
signal dcache_events : DcacheEventType;
signal writeback_events : WritebackEventType;
-- Debug status
signal dbg_core_is_stopped: std_ulogic;
-- Logging signals
signal log_data : std_ulogic_vector(255 downto 0);
signal log_rd_addr : std_ulogic_vector(31 downto 0);
signal log_wr_addr : std_ulogic_vector(31 downto 0);
signal log_rd_data : std_ulogic_vector(63 downto 0);
function keep_h(disable : boolean) return string is
begin
if disable then
return "yes";
else
return "no";
end if;
end function;
attribute keep_hierarchy : string;
attribute keep_hierarchy of fetch1_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of icache_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of decode1_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of decode2_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of register_file_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of cr_file_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of execute1_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of loadstore1_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of mmu_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of dcache_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of writeback_0 : label is keep_h(DISABLE_FLATTEN);
attribute keep_hierarchy of debug_0 : label is keep_h(DISABLE_FLATTEN);
begin
core_rst <= dbg_core_rst or rst;
resets: process(clk)
begin
if rising_edge(clk) then
rst_fetch1 <= core_rst;
rst_fetch2 <= core_rst;
rst_icache <= core_rst;
rst_dcache <= core_rst;
rst_dec1 <= core_rst;
rst_dec2 <= core_rst;
rst_ex1 <= core_rst;
rst_fpu <= core_rst;
rst_ls1 <= core_rst;
rst_wback <= core_rst;
rst_dbg <= rst;
alt_reset_d <= alt_reset;
end if;
end process;
fetch1_0: entity work.fetch1
generic map (
RESET_ADDRESS => (others => '0'),
fetch1: Implement a simple branch target cache This implements a cache in fetch1, where each entry stores the address of a simple branch instruction (b or bc) and the target of the branch. When fetching sequentially, if the address being fetched matches the cache entry, then fetching will be redirected to the branch target. The cache has 1024 entries and is direct-mapped, i.e. indexed by bits 11..2 of the NIA. The bus from execute1 now carries information about taken and not-taken simple branches, which fetch1 uses to update the cache. The cache entry is updated for both taken and not-taken branches, with the valid bit being set if the branch was taken and cleared if the branch was not taken. If fetching is redirected to the branch target then that goes down the pipe as a predicted-taken branch, and decode1 does not do any static branch prediction. If fetching is not redirected, then the next instruction goes down the pipe as normal and decode1 does its static branch prediction. In order to make timing, the lookup of the cache is pipelined, so on each cycle the cache entry for the current NIA + 8 is read. This means that after a redirect (from decode1 or execute1), only the third and subsequent sequentially-fetched instructions will be able to be predicted. This improves the coremark value on the Arty A7-100 from about 180 to about 190 (more than 5%). The BTC is optional. Builds for the Artix 7 35-T part have it off by default because the extra ~1420 LUTs it takes mean that the design doesn't fit on the Arty A7-35 board. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
ALT_RESET_ADDRESS => ALT_RESET_ADDRESS,
HAS_BTC => HAS_BTC
)
port map (
clk => clk,
rst => rst_fetch1,
alt_reset_in => alt_reset_d,
stall_in => fetch1_stall_in,
flush_in => fetch1_flush,
fetch1: Implement a simple branch target cache This implements a cache in fetch1, where each entry stores the address of a simple branch instruction (b or bc) and the target of the branch. When fetching sequentially, if the address being fetched matches the cache entry, then fetching will be redirected to the branch target. The cache has 1024 entries and is direct-mapped, i.e. indexed by bits 11..2 of the NIA. The bus from execute1 now carries information about taken and not-taken simple branches, which fetch1 uses to update the cache. The cache entry is updated for both taken and not-taken branches, with the valid bit being set if the branch was taken and cleared if the branch was not taken. If fetching is redirected to the branch target then that goes down the pipe as a predicted-taken branch, and decode1 does not do any static branch prediction. If fetching is not redirected, then the next instruction goes down the pipe as normal and decode1 does its static branch prediction. In order to make timing, the lookup of the cache is pipelined, so on each cycle the cache entry for the current NIA + 8 is read. This means that after a redirect (from decode1 or execute1), only the third and subsequent sequentially-fetched instructions will be able to be predicted. This improves the coremark value on the Arty A7-100 from about 180 to about 190 (more than 5%). The BTC is optional. Builds for the Artix 7 35-T part have it off by default because the extra ~1420 LUTs it takes mean that the design doesn't fit on the Arty A7-35 board. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
inval_btc => ex1_icache_inval or mmu_to_icache.tlbie,
stop_in => dbg_core_stop,
d_in => decode1_to_fetch1,
w_in => writeback_to_fetch1,
i_out => fetch1_to_icache,
log_out => log_data(42 downto 0)
);
fetch1_stall_in <= icache_stall_out or decode1_busy;
fetch1_flush <= flush or decode1_flush;
icache_0: entity work.icache
generic map(
SIM => SIM,
LINE_SIZE => 64,
NUM_LINES => ICACHE_NUM_LINES,
NUM_WAYS => ICACHE_NUM_WAYS,
TLB_SIZE => ICACHE_TLB_SIZE,
LOG_LENGTH => LOG_LENGTH
)
port map(
clk => clk,
rst => rst_icache,
i_in => fetch1_to_icache,
i_out => icache_to_decode1,
Add TLB to icache This adds a direct-mapped TLB to the icache, with 64 entries by default. Execute1 now sends a "virt_mode" signal from MSR[IR] to fetch1 along with redirects to indicate whether instruction addresses should be translated through the TLB, and fetch1 sends that on to icache. Similarly a "priv_mode" signal is sent to indicate the privilege mode for instruction fetches. This means that changes to MSR[IR] or MSR[PR] don't take effect until the next redirect, meaning an isync, rfid, branch, etc. The icache uses a hash of the effective address (i.e. next instruction address) to index the TLB. The hash is an XOR of three fields of the address; with a 64-entry TLB, the fields are bits 12--17, 18--23 and 24--29 of the address. TLB invalidations simply invalidate the indexed TLB entry without checking the contents. If the icache detects a TLB miss with virt_mode=1, it will send a fetch_failed indication through fetch2 to decode1, which will turn it into a special OP_FETCH_FAILED opcode with unit=LDST. That will get sent down to loadstore1 which will currently just raise a Instruction Storage Interrupt (0x400) exception. One bit in the PTE obtained from the TLB is used to check whether an instruction access is allowed -- the privilege bit (bit 3). If bit 3 is 1 and priv_mode=0, then a fetch_failed indication is sent down to fetch2 and to decode1, which generates an OP_FETCH_FAILED. Any PTEs with PTE bit 0 (EAA[3]) clear or bit 8 (R) clear should not be put into the iTLB since such PTEs would not allow execution by any context. Tlbie operations get sent from mmu to icache over a new connection. Unfortunately the privileged instruction tests are broken for now. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
m_in => mmu_to_icache,
flush_in => fetch1_flush,
inval_in => dbg_icache_rst or ex1_icache_inval,
stall_in => icache_stall_in,
stall_out => icache_stall_out,
wishbone_out => wishbone_insn_out,
wishbone_in => wishbone_insn_in,
wb_snoop_in => wb_snoop_in,
events => icache_events,
log_out => log_data(96 downto 43)
);
icache_stall_in <= decode1_busy;
decode1_0: entity work.decode1
generic map(
HAS_FPU => HAS_FPU,
LOG_LENGTH => LOG_LENGTH
)
port map (
clk => clk,
rst => rst_dec1,
stall_in => decode1_stall_in,
flush_in => flush,
flush_out => decode1_flush,
busy_out => decode1_busy,
f_in => icache_to_decode1,
d_out => decode1_to_decode2,
f_out => decode1_to_fetch1,
log_out => log_data(109 downto 97)
);
decode1_stall_in <= decode2_stall_out;
decode2_0: entity work.decode2
generic map (
EX1_BYPASS => EX1_BYPASS,
HAS_FPU => HAS_FPU,
LOG_LENGTH => LOG_LENGTH
)
port map (
clk => clk,
rst => rst_dec2,
busy_in => decode2_busy_in,
stall_out => decode2_stall_out,
flush_in => flush,
complete_in => complete,
stopped_out => dbg_core_is_stopped,
d_in => decode1_to_decode2,
e_out => decode2_to_execute1,
r_in => register_file_to_decode2,
r_out => decode2_to_register_file,
c_in => cr_file_to_decode2,
c_out => decode2_to_cr_file,
execute_bypass => execute1_bypass,
execute_cr_bypass => execute1_cr_bypass,
log_out => log_data(119 downto 110)
);
decode2_busy_in <= ex1_busy_out;
register_file_0: entity work.register_file
generic map (
SIM => SIM,
HAS_FPU => HAS_FPU,
LOG_LENGTH => LOG_LENGTH
)
port map (
clk => clk,
d_in => decode2_to_register_file,
d_out => register_file_to_decode2,
w_in => writeback_to_register_file,
dbg_gpr_req => dbg_gpr_req,
dbg_gpr_ack => dbg_gpr_ack,
dbg_gpr_addr => dbg_gpr_addr,
dbg_gpr_data => dbg_gpr_data,
sim_dump => terminate,
sim_dump_done => sim_cr_dump,
log_out => log_data(255 downto 184)
);
cr_file_0: entity work.cr_file
generic map (
SIM => SIM,
LOG_LENGTH => LOG_LENGTH
)
port map (
clk => clk,
d_in => decode2_to_cr_file,
d_out => cr_file_to_decode2,
w_in => writeback_to_cr_file,
sim_dump => sim_cr_dump,
log_out => log_data(183 downto 171)
);
execute1_0: entity work.execute1
generic map (
EX1_BYPASS => EX1_BYPASS,
HAS_FPU => HAS_FPU,
HAS_SHORT_MULT => HAS_SHORT_MULT,
LOG_LENGTH => LOG_LENGTH
)
port map (
clk => clk,
rst => rst_ex1,
flush_in => flush,
busy_out => ex1_busy_out,
e_in => decode2_to_execute1,
l_in => loadstore1_to_execute1,
fp_in => fpu_to_execute1,
ext_irq_in => ext_irq,
interrupt_in => do_interrupt,
l_out => execute1_to_loadstore1,
fp_out => execute1_to_fpu,
e_out => execute1_to_writeback,
bypass_data => execute1_bypass,
bypass_cr_data => execute1_cr_bypass,
icache_inval => ex1_icache_inval,
dbg_msr_out => msr,
wb_events => writeback_events,
ls_events => loadstore_events,
dc_events => dcache_events,
ic_events => icache_events,
terminate_out => terminate,
log_out => log_data(134 downto 120),
log_rd_addr => log_rd_addr,
log_rd_data => log_rd_data,
log_wr_addr => log_wr_addr
);
with_fpu: if HAS_FPU generate
begin
fpu_0: entity work.fpu
port map (
clk => clk,
rst => rst_fpu,
e_in => execute1_to_fpu,
e_out => fpu_to_execute1,
w_out => fpu_to_writeback
);
end generate;
no_fpu: if not HAS_FPU generate
begin
fpu_to_execute1 <= FPUToExecute1Init;
fpu_to_writeback <= FPUToWritebackInit;
end generate;
loadstore1_0: entity work.loadstore1
generic map (
HAS_FPU => HAS_FPU,
LOG_LENGTH => LOG_LENGTH
)
port map (
clk => clk,
rst => rst_ls1,
l_in => execute1_to_loadstore1,
e_out => loadstore1_to_execute1,
l_out => loadstore1_to_writeback,
d_out => loadstore1_to_dcache,
d_in => dcache_to_loadstore1,
m_out => loadstore1_to_mmu,
m_in => mmu_to_loadstore1,
dc_stall => dcache_stall_out,
events => loadstore_events,
log_out => log_data(149 downto 140)
);
mmu_0: entity work.mmu
port map (
clk => clk,
rst => core_rst,
l_in => loadstore1_to_mmu,
l_out => mmu_to_loadstore1,
d_out => mmu_to_dcache,
Add TLB to icache This adds a direct-mapped TLB to the icache, with 64 entries by default. Execute1 now sends a "virt_mode" signal from MSR[IR] to fetch1 along with redirects to indicate whether instruction addresses should be translated through the TLB, and fetch1 sends that on to icache. Similarly a "priv_mode" signal is sent to indicate the privilege mode for instruction fetches. This means that changes to MSR[IR] or MSR[PR] don't take effect until the next redirect, meaning an isync, rfid, branch, etc. The icache uses a hash of the effective address (i.e. next instruction address) to index the TLB. The hash is an XOR of three fields of the address; with a 64-entry TLB, the fields are bits 12--17, 18--23 and 24--29 of the address. TLB invalidations simply invalidate the indexed TLB entry without checking the contents. If the icache detects a TLB miss with virt_mode=1, it will send a fetch_failed indication through fetch2 to decode1, which will turn it into a special OP_FETCH_FAILED opcode with unit=LDST. That will get sent down to loadstore1 which will currently just raise a Instruction Storage Interrupt (0x400) exception. One bit in the PTE obtained from the TLB is used to check whether an instruction access is allowed -- the privilege bit (bit 3). If bit 3 is 1 and priv_mode=0, then a fetch_failed indication is sent down to fetch2 and to decode1, which generates an OP_FETCH_FAILED. Any PTEs with PTE bit 0 (EAA[3]) clear or bit 8 (R) clear should not be put into the iTLB since such PTEs would not allow execution by any context. Tlbie operations get sent from mmu to icache over a new connection. Unfortunately the privileged instruction tests are broken for now. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
d_in => dcache_to_mmu,
i_out => mmu_to_icache
);
dcache_0: entity work.dcache
generic map(
LINE_SIZE => 64,
NUM_LINES => DCACHE_NUM_LINES,
NUM_WAYS => DCACHE_NUM_WAYS,
TLB_SET_SIZE => DCACHE_TLB_SET_SIZE,
TLB_NUM_WAYS => DCACHE_TLB_NUM_WAYS,
LOG_LENGTH => LOG_LENGTH
)
port map (
clk => clk,
rst => rst_dcache,
d_in => loadstore1_to_dcache,
d_out => dcache_to_loadstore1,
m_in => mmu_to_dcache,
m_out => dcache_to_mmu,
stall_out => dcache_stall_out,
wishbone_in => wishbone_data_in,
wishbone_out => wishbone_data_out,
snoop_in => wb_snoop_in,
events => dcache_events,
log_out => log_data(170 downto 151)
);
writeback_0: entity work.writeback
port map (
clk => clk,
rst => rst_wback,
flush_out => flush,
e_in => execute1_to_writeback,
l_in => loadstore1_to_writeback,
fp_in => fpu_to_writeback,
w_out => writeback_to_register_file,
c_out => writeback_to_cr_file,
f_out => writeback_to_fetch1,
events => writeback_events,
interrupt_out => do_interrupt,
complete_out => complete
);
log_data(150) <= '0';
log_data(139 downto 135) <= "00000";
debug_0: entity work.core_debug
generic map (
LOG_LENGTH => LOG_LENGTH
)
port map (
clk => clk,
rst => rst_dbg,
dmi_addr => dmi_addr,
dmi_din => dmi_din,
dmi_dout => dmi_dout,
dmi_req => dmi_req,
dmi_wr => dmi_wr,
dmi_ack => dmi_ack,
core_stop => dbg_core_stop,
core_rst => dbg_core_rst,
icache_rst => dbg_icache_rst,
terminate => terminate,
core_stopped => dbg_core_is_stopped,
nia => fetch1_to_icache.nia,
msr => msr,
dbg_gpr_req => dbg_gpr_req,
dbg_gpr_ack => dbg_gpr_ack,
dbg_gpr_addr => dbg_gpr_addr,
dbg_gpr_data => dbg_gpr_data,
log_data => log_data,
log_read_addr => log_rd_addr,
log_read_data => log_rd_data,
log_write_addr => log_wr_addr,
terminated_out => terminated_out
);
end behave;