microwatt/writeback.vhdl

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

library work;
use work.common.all;
use work.crhelpers.all;

entity writeback is
    port (
        clk          : in std_ulogic;

        e_in         : in Execute1ToWritebackType;
        l_in         : in Loadstore2ToWritebackType;
        m_in         : in MultiplyToWritebackType;
        d_in         : in DividerToWritebackType;

        w_out        : out WritebackToRegisterFileType;
        c_out        : out WritebackToCrFileType;

        complete_out : out std_ulogic
        );
end entity writeback;

architecture behaviour of writeback is
    subtype byte_index_t is unsigned(2 downto 0);
    type permutation_t is array(0 to 7) of byte_index_t;
    subtype byte_trim_t is std_ulogic_vector(1 downto 0);
    type trim_ctl_t is array(0 to 7) of byte_trim_t;
    type byte_sel_t is array(0 to 7) of std_ulogic;

    signal data_len : unsigned(3 downto 0);
    signal data_in : std_ulogic_vector(63 downto 0);
    signal data_permuted : std_ulogic_vector(63 downto 0);
    signal data_trimmed : std_ulogic_vector(63 downto 0);
    signal data_latched : std_ulogic_vector(63 downto 0);
    signal perm : permutation_t;
    signal use_second : byte_sel_t;
    signal byte_offset : unsigned(2 downto 0);
    signal brev_lenm1 : unsigned(2 downto 0);
    signal trim_ctl : trim_ctl_t;
    signal rc : std_ulogic;
    signal partial_write : std_ulogic;
    signal sign_extend : std_ulogic;
    signal negative : std_ulogic;
    signal second_word : std_ulogic;
begin
    writeback_0: process(clk)
    begin
        if rising_edge(clk) then
            if partial_write = '1' then
                data_latched <= data_permuted;
            end if;
        end if;
    end process;

    writeback_1: process(all)
        variable x : std_ulogic_vector(0 downto 0);
        variable y : std_ulogic_vector(0 downto 0);
        variable z : std_ulogic_vector(0 downto 0);
        variable w : std_ulogic_vector(0 downto 0);
        variable j : integer;
        variable k : unsigned(3 downto 0);
    begin
        x := "" & e_in.valid;
        y := "" & l_in.valid;
        z := "" & m_in.valid;
        w := "" & d_in.valid;
        assert (to_integer(unsigned(x)) + to_integer(unsigned(y)) + to_integer(unsigned(z)) + to_integer(unsigned(w))) <= 1 severity failure;

        x := "" & e_in.write_enable;
        y := "" & l_in.write_enable;
        z := "" & m_in.write_reg_enable;
        w := "" & d_in.write_reg_enable;
        assert (to_integer(unsigned(x)) + to_integer(unsigned(y)) + to_integer(unsigned(z)) + to_integer(unsigned(w))) <= 1 severity failure;

        w := "" & e_in.write_cr_enable;
        x := "" & (e_in.write_enable and e_in.rc);
        y := "" & (m_in.valid and m_in.rc);
        z := "" & (d_in.valid and d_in.rc);
        assert (to_integer(unsigned(w)) + to_integer(unsigned(x)) + to_integer(unsigned(y)) + to_integer(unsigned(z))) <= 1 severity failure;

        w_out <= WritebackToRegisterFileInit;
        c_out <= WritebackToCrFileInit;

        complete_out <= '0';
        if e_in.valid = '1' or l_in.valid = '1' or m_in.valid = '1' or d_in.valid = '1' then
            complete_out <= '1';
        end if;

        rc <= '0';
        brev_lenm1 <= "000";
        byte_offset <= "000";
        data_len <= x"8";
        partial_write <= '0';
        sign_extend <= '0';
        second_word <= '0';
        data_in <= e_in.write_data;

        if e_in.write_enable = '1' then
            w_out.write_reg <= e_in.write_reg;
            data_in <= e_in.write_data;
            w_out.write_enable <= '1';
            data_len <= unsigned(e_in.write_len);
            sign_extend <= e_in.sign_extend;
            rc <= e_in.rc;
        end if;

        if e_in.write_cr_enable = '1' then
            c_out.write_cr_enable <= '1';
            c_out.write_cr_mask <= e_in.write_cr_mask;
            c_out.write_cr_data <= e_in.write_cr_data;
        end if;

        if l_in.write_enable = '1' then
            w_out.write_reg <= l_in.write_reg;
            data_in <= l_in.write_data;
            data_len <= unsigned(l_in.write_len);
            byte_offset <= unsigned(l_in.write_shift);
            sign_extend <= l_in.sign_extend;
            if l_in.byte_reverse = '1' then
                brev_lenm1 <= unsigned(l_in.write_len(2 downto 0)) - 1;
            end if;
            w_out.write_enable <= '1';
            second_word <= l_in.second_word;
            if l_in.valid = '0' and (data_len + byte_offset > 8) then
                partial_write <= '1';
            end if;
        end if;

        if m_in.write_reg_enable = '1' then
            w_out.write_enable <= '1';
            w_out.write_reg <= m_in.write_reg_nr;
            data_in <= m_in.write_reg_data;
            rc <= m_in.rc;
        end if;

        if d_in.write_reg_enable = '1' then
            w_out.write_enable <= '1';
            w_out.write_reg <= d_in.write_reg_nr;
            data_in <= d_in.write_reg_data;
            rc <= d_in.rc;
        end if;

        -- shift and byte-reverse data bytes
        for i in 0 to 7 loop
            k := ('0' & (to_unsigned(i, 3) xor brev_lenm1)) + ('0' & byte_offset);
            perm(i) <= k(2 downto 0);
            use_second(i) <= k(3);
        end loop;
        for i in 0 to 7 loop
            j := to_integer(perm(i)) * 8;
            data_permuted(i * 8 + 7 downto i * 8) <= data_in(j + 7 downto j);
        end loop;

        -- If the data can arrive split over two cycles, this will be correct
        -- provided we don't have both sign extension and byte reversal.
        negative <= (data_len(2) and data_permuted(31)) or (data_len(1) and data_permuted(15)) or
                    (data_len(0) and data_permuted(7));

        -- trim and sign-extend
        for i in 0 to 7 loop
            if i < to_integer(data_len) then
                if second_word = '1' then
                    trim_ctl(i) <= '1' & not use_second(i);
                else
                    trim_ctl(i) <= not use_second(i) & '0';
                end if;
            else
                trim_ctl(i) <= '0' & (negative and sign_extend);
            end if;
        end loop;
        for i in 0 to 7 loop
            case trim_ctl(i) is
                when "11" =>
                    data_trimmed(i * 8 + 7 downto i * 8) <= data_latched(i * 8 + 7 downto i * 8);
                when "10" =>
                    data_trimmed(i * 8 + 7 downto i * 8) <= data_permuted(i * 8 + 7 downto i * 8);
                when "01" =>
                    data_trimmed(i * 8 + 7 downto i * 8) <= x"FF";
                when others =>
                    data_trimmed(i * 8 + 7 downto i * 8) <= x"00";
            end case;
        end loop;

        -- deliver to regfile
        w_out.write_data <= data_trimmed;

        -- test value against 0 and set CR0 if requested
        if rc = '1' then
            c_out.write_cr_enable <= '1';
            c_out.write_cr_mask <= num_to_fxm(0);
            if data_trimmed(63) = '1' then
                c_out.write_cr_data <= x"80000000";
            elsif or (data_trimmed(62 downto 0)) = '1' then
                c_out.write_cr_data <= x"40000000";
            else
                c_out.write_cr_data <= x"20000000";
            end if;
        end if;
    end process;
end;