logical: Only do output inversion for OP_AND, OP_OR and OP_XOR

It's not needed for the other ops (popcnt, parity, etc.) and the
logical unit shows up as a critical path from time to time.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

logical.vhdl

@@ -86,13 +86,20 @@ begin
             rb_adj := not rb;
         end if;
 
+        case op is
+            when OP_AND | OP_OR | OP_XOR =>
                 case op is
                     when OP_AND =>
                         tmp := rs and rb_adj;
                     when OP_OR =>
                         tmp := rs or rb_adj;
-	    when OP_XOR =>
+                    when others =>
                         tmp := rs xor rb_adj;
+                end case;
+                if invert_out = '1' then
+                    tmp := not tmp;
+                end if;
+
             when OP_POPCNT =>
                 tmp := popcnt;
             when OP_PRTY =>
@@ -115,9 +122,6 @@ begin
 		tmp(7 downto 0) := rs(7 downto 0);
         end case;
 
-        if invert_out = '1' then
-            tmp := not tmp;
-        end if;
         result <= tmp;
 
     end process;