matthew1kalasky3
/
microwatt
forked from cores/microwatt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
485 Commits
31 Branches
0 Tags
65 MiB
master
fpu-init
loadstore-init
core_debug-init
icache-unused-sig
icache-insn-u-state
dcache-unused-sig
unused-sig
divider-init
loadstore-pmu-init
icache-pmu-events
fpu-typo
less-fpga-init
caravel-mpw6-20220530
caravel-mpw5-20220323
caravel-mpw5-20220322
alt-reset-address
log2ceil-issue
fpu-constant
asic-3
boxarty-20211011
icbi-issue
orange-crab-freq
dcache-nc-fix
remove-potato-uart
cache-tlb-parameters-2
caravel-20210114
caravel-20210105
jtag-port-2
jtag-port
nia-debug
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'fa50df56ef'
${ noResults }
Commit Graph

4 Commits (fa50df56ef572aa23b1aaa58cc4d8f9fb32086df)

Author SHA1 Message Date
Paul Mackerras e08ca4ab8e countzero: Add a register to help make timing 
This adds a register in the middle of the countzero computation,
so that we now have two cycles to count leading or trailing zeroes
instead of just one.  Execute1 now outputs a one-cycle stall signal
when it encounters a cntlz* or cnttz* instruction.  With this,
the countzero path no longer fails timing on the Artix-7 at 100MHz.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
 5 years ago
Paul Mackerras e527e3a9b7 countzero: Reorganize to have fewer levels of logic and fewer LUTs 
By using 4:1 multiplexers rather than 2:1, this cuts the number of
levels of multiplexing from 4 to 2 and also reduces the total number
of slice LUTs required.  Because we are now handling 4 bits at each
level, including the bottom level, the logic to do the priority
encoding can be factored out into a function that is used at each
level.

This rearranges the logic so that the encoding and selection of bits
is done whether or not the input operand is zero, and the if statement
testing whether the input is zero only affects what is assigned to
result.  With this we don't get the inferred latches and we can go
back to using signals rather than variables.

Also add some comments about what is being done.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
 5 years ago
Anton Blanchard 1b559aee31 Fix count-leading/trailing-zeroes 
The current code simulates correctly, but produces miscompares when synthesized
onto an FPGA. On closer inspection GHDL synthesis complains about inferred
latches and there does seem to be issues.

Convert it to variables that are always initialized to zero at the start of the
process.

Fixes: 24a4a796ce ("execute: Consolidate count-leading/trailing-zeroes implementations")
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
 5 years ago
Paul Mackerras 24a4a796ce execute: Consolidate count-leading/trailing-zeroes implementations 
This adds combinatorial logic that does 32-bit and 64-bit count
leading and trailing zeroes in one unit, and consolidates the
four instructions under a single OP_CNTZ opcode.

This saves 84 slice LUTs on the Arty A7-100.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
 5 years ago