Commit Graph

27 Commits (8af2b004c389aeb65e12621eb59f5416706268f1)

Author SHA1 Message Date
Anton Blanchard c8328cdf84 Remove gcc software divide patch
We have a divider, thanks to Paul.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 6cbf456388 SOC memory wishbone should clear ACK regardless of STB
The memory wishbone doesn't clear ACK and move the state machine on
until STB is de-asserted. This seems like it isn't compliant with
the spec and results in a maximum throughput of 1 transfer every
3 cycles.

Fixing this improves the situation to one transfer every 2 cycles.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard d89a9929fd Fix clk_gen_bypass
I broke clk_gen_bypass when updating the SOC reset code.

Fixes 03fd06deaf ("Rework SOC reset")
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 142a722ce4 Remove names from end record statements
These are optional, and vhdlpp from iverilog barfs on them.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Benjamin Herrenschmidt 3ac1dbc737 Share soc.vhdl between FPGA and sim
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt d21ef5836d Pass wishbone record to bram memory module
(And rename it to mw_soc_memory).

This makes soc.vhdl simpler and provides the same interface as
the simulated memory, which will help when sharing soc.vhdl
with sim later

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 1d66e1f981 Rework wishbone slave address decoding
Don't make it synchronous, no latches

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt c97b080d8c Move wishbone arbiter out of the core
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 310a56c076 Re-indent and reformat soc.vhdl
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt a69a93b466 Split FPGA toplevel from soc
This will be useful when we start needing different toplevels for
different boards.

We keep the reset and clock generators in the toplevel as they will
eventually be taken over by litedram when we integrate it, and they
are more likely to change on different system types.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Anton Blanchard 270d7b1b9a Cmod A7-35 support
This adds support for the Digilane Cmod A7-35.

I had to use the MMCM because the clock (12 MHz) is below the PLL
minimum of 19 MHz.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 14da542d4a
Merge pull request #20 from antonblanchard/reset-rework2
Rework reset code
5 years ago
Anton Blanchard 63295526ad Add CONFIG_VOLTAGE and CFGBVS entries
Remove a couple of warnings from Vivado.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 03fd06deaf Rework SOC reset
The old reset code was overly complicated and never worked properly.
Replace it with a simpler sequence that uses a couple of shift registers
to assert resets:

- Wait a number of external clock cycles before removing reset from
  the PLL.

- After the PLL locks and the external reset button isn't pressed,
  wait a number of PLL clock cycles before removing reset from the SOC.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard a53ad60014 Rename a few reset signals
clk -> ext_clk
reset_n -> ext_rst
reset -> rst

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 5379b805ec Arty A7 reset pin is C2
Use C2 for reset, and fix up a few whitespace issues.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
riktw 4ebd6fc1f7 Added support for building for Arty A7 boards 5 years ago
Anton Blanchard 95b9f19882 Fix ghdl build error with pp_soc_memory
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 1fa0b332ca micropython only requires 512kB of BRAM
Mikey points out that our stack grows down from 512kB and our
heap is below that too, so we can reduce our BRAM requirements,
which allowing some smaller FPGA boards to work. Not sure why
I thought we were using memory between 512kB and 1MB.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 0a0ad9b384 Rebuild hello world assuming a 50MHz clock
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Olof Kindgren 12327034d6 Add and use plle2 primitive for nexys boards 5 years ago
Anton Blanchard 8bc3e8ea0a Add a simple hello_world example that also echos input
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Olof Kindgren abca85b034 Add constraint file for Nexys A7 5 years ago
Olof Kindgren e8ad9bed10 Expose ram init file and memory size through toplevel 5 years ago
Olof Kindgren b5bccc4c13 Add dummy clock generator 5 years ago
Anton Blanchard 37fe8b954c Add a few more FPGA related files
Add a temporary gcc patch to remove hardware divide instructions.

Also add a firmware.hex file built with a gcc with the above patch.

Right now micropython assumes 1MB of BRAM, which limits the FPGAs
we can run on. We should be able to cut it down somewhat.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 5a29cb4699 Initial import of microwatt
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago