microwatt

Commit Graph

Author	SHA1	Message	Date
Matt Johnston	5a3cdc8b22	litedram: disable block_until_ready, regenerate Recent litedram gets stuck at memtest unless block_until_ready=False. (discussion in https://github.com/enjoy-digital/litedram/pull/292) This change regenerates with latest litedram and litex 62abf9c ("litedram_gen: Add block_until_ready port parameter to control blocking behaviour.") add2746a ("tools/litex_cli: Rename wb to bus.") Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>	3 years ago
Anton Blanchard	ac546a3024	litedram: Update yaml files Update the litedram yaml files based on latest upstream. Signed-off-by: Anton Blanchard <anton@linux.ibm.com>	4 years ago
Benjamin Herrenschmidt	dbb137437c	acorn: Add support for the Acorn CLE 215+ This is a NiteFury based PCIe M2 form-factor board originally used for mining. It contains a speed grade 2 Artix 7 200T, 1GB of DDR3 and 32MB of flash. The serial port is routed to pin 2 (RX) and 3 (TX) of the P2 connector (pin 1 is GND). Note: Only 16MB of flash is currently usable until code is added to configure the flash controller to use 4-bytes address commands on that part. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>	5 years ago

Author

SHA1

Message

Date

Matt Johnston

5a3cdc8b22

litedram: disable block_until_ready, regenerate

Recent litedram gets stuck at memtest unless block_until_ready=False.
(discussion in https://github.com/enjoy-digital/litedram/pull/292)

This change regenerates with latest litedram and litex
62abf9c ("litedram_gen: Add block_until_ready port parameter to control blocking behaviour.")
add2746a ("tools/litex_cli: Rename wb to bus.")

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>

Anton Blanchard

ac546a3024

litedram: Update yaml files

Update the litedram yaml files based on latest upstream.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>

Benjamin Herrenschmidt

dbb137437c

acorn: Add support for the Acorn CLE 215+

This is a NiteFury based PCIe M2 form-factor board originally
used for mining. It contains a speed grade 2 Artix 7 200T,
1GB of DDR3 and 32MB of flash.

The serial port is routed to pin 2 (RX) and 3 (TX) of the P2
connector (pin 1 is GND).

Note: Only 16MB of flash is currently usable until code is added
to configure the flash controller to use 4-bytes address commands
on that part.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

3 Commits (606359cce35f4ba28d58eb53bbde09f3c117c672)