LiteDRAM at the moment pretty much enforces 100Mhz, and our software
isn't quite yet adaptable, so switch out default to 100Mhz accross
the board. Recent timing improvements should make it a non-issue.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
During slow instructions such as multiply or divide, if a decrementer
(or other asynchronous) interrupt becomes pending, it disrupts the
logic that keeps stall asserted until the end of the slow
instruction, and the interrupt logic starts trying to deliver the
interrupt before the slow instruction has finished.
To fix that, make the interrupt logic wait until it sees e_in.valid
set before setting exception to 1.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
We can hit the assert for req_op = OP_STORE_HIT and reloading in the
case of dcbz, since it looks like a store. Therefore we need to
exclude that case from the assert.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This adds a test that tries to execute various privileged instructions
with MSR[PR] = 1. This also incidentally tests some of the MSR bit
manipulations.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This adds logic to dcache and loadstore1 to implement dcbz. For now
it zeroes a single cache line (by default 64 bytes), not 128 bytes
like IBM Power processors do.
The dcbz operation is performed much like a load miss, except that
we are writing zeroes to memory instead of reading. As each ack
comes back, we write zeroes to the BRAM instead of data from memory.
In this way we zero the line in memory and also zero the line of
cache memory, establishing the line in the cache if it wasn't already
resident. If it was already resident then we overwrite the existing
line in the cache.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
In preparation for adding a TLB to the dcache, this plumbs the
insn_type from execute1 through to loadstore1, so that we can have
other operations besides loads and stores (e.g. tlbie) going to
loadstore1 and thence to the dcache. This also plumbs the unit field
of the decode ROM from decode2 through to execute1 to simplify the
logic around which ops need to go to loadstore1.
The load and store data formatting are now not conditional on the
op being OP_LOAD or OP_STORE. This eliminates the inferred latches
clocked by each of the bits of r.op that we were getting previously.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This adds logic to execute1 to check, when MSR[PR] = 1, whether each
instruction arriving to be executed is a privileged instruction.
If it is, a privileged-instruction type program interrupt is generated.
For the mtspr and mfspr instructions, we need to look at bit 20 of the
instruction (bit 4 of the SPR number) to determine if the SPR is
privileged.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This makes our treatment of the MSR conform better with the ISA.
- On reset, initialize the MSR to have the SF and LE bits set and
all the others reset. For good measure initialize r properly too.
- Fix the bit numbering in msr_copy (the code was using big-endian
bit numbers, not little-endian).
- Use constants like MSR_EE to index MSR bits instead of expressions
like '63 - 48', for readability.
- Set MSR[SF, LE] and clear MSR[PR, IR, DR, RI] on interrupts.
- Copy the relevant fields for rfid instead of using msr_copy, because
the partial function fields of the MSR should be left unchanged,
not zeroed. Our implementation of rfid is like the architecture
description of hrfid, because we don't implement hypervisor mode.
- Return the whole MSR for mfmsr.
- Implement the L field for mtmsrd (L=1 copies just EE and RI).
- For mtmsrd with L=0, leave out the HV, ME and LE bits as per the arch.
- For mtmsrd and rfid, if PR ends up set, then also set EE, IR and DR
as per the arch.
- A few other minor tidyups (no semantic change).
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Checks interrupt masking and priorities.
Adds to `make test_xics` which is run in `make check` also.
Signed-off-by: Michael Neuling <mikey@neuling.org>
New unified ICP and ICS XICS compliant interrupt controller.
Configurable number of hardware sources.
Fixed hardware source number based on hardware line taken. All
hardware interrupts are a fixed priority. Level interrupts supported
only.
Hardwired to 0xc0004000 in SOC (UART is kept at 0xc0002000).
Signed-off-by: Michael Neuling <mikey@neuling.org>
This fixes a bug in the logic where we would still send a load
or store instruction to loadstore1 even though we have decided
to take an asynchronous interrupt.
Reported-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Use a symlink to share the console code in hello_world. Not ideal,
but we can improve on it later.
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
I'm hitting a build error:
error[E0050]: method `alloc` has 2 parameters but the declaration in trait `core::alloc::AllocRef::alloc` has 3
Updating the version of linked_list_allocator fixes it. I updated
heapless to while I was at it.
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
This decodes attn using entry 0 of the major_decode_rom_array table
instead of a special case in the decode1_1 process. This means that
only the major opcode (the top 6 bits) is checked at decode time.
To make sure the instruction is attn not some random illegal pattern,
we now check bits 1-10 of the instruction at execute time and
generate an illegal instruction interrupt if those bits are not
0100000000.
This reduces LUT consumption by 42 LUTs on the Arty A7-100.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This decodes sc using entry 17 of the major_decode_rom_array table
instead of a special case in the decode1_1 process. This means that
only the major opcode (the top 6 bits) is checked at decode time.
To make sure that the instruction is sc not scv, we now check bit
1 of the instruction at execute time and generate an illegal
instruction interrupt if it is 0 (indicating scv). The level field
of the sc instruction is now ignored.
This reduces LUT consumption by 31 LUTs on the Arty A7-100.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This implements the trap instructions (tw, twi, td, tdi) using
much of the same code as is used for the cmp/cmpl instructions.
A 5-bit comparison value is generated, and for cmp/cmpl, the
appropriate 3 bits are used to update the destination CR, and for
trap instructions, the comparison value is ANDed with the TO
field, and an exception is generated if any bit of the result
is 1.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This replaces OP_TD, OP_TDI, OP_TW and OP_TWI with a single OP_TRAP,
distinguishing the cases by the input_reg_b and is_32bit fields of
the decode ROM. This adds the twi and td cases to the decode tables.
For now we make all of the trap instructions unconditionally generate
a trap-type program interrupt if the TO field of the instruction is
all ones, and do nothing otherwise.
This reduces the number of values in insn_type_t from 65 to 62,
meaning that an insn_type_t can now be encoded in 6 bits rather
than 7.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This makes some simplifications to the interrupt logic which will
help with later commits.
- When irq_valid is set, don't set exception to 1 until we have a
valid instruction. That means we can remove the if e_in.valid = '1'
test from the exception = '1' block.
- Don't assert stall_out on the first cycle of delivering an
interrupt. If we do get another instruction in the next cycle,
nothing will happen because we have ctrl.irq_state set and we
will just continue writing the interrupt registers.
- Make sure we deliver as many completions as we got instructions,
otherwise the outstanding instruction count in control.vhdl gets
out of sync.
- In writeback, make sure all of the other write enables are ignored
when e_in.exc_write_enable is set.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
OP_MCRF covers the CR logical ops as well as mcrf since commit
c05441bf47 ("Implement CRNOR and friends"), so this renames
OP_MCRF to OP_CROP. The OP_* values for the individual CR logical
ops (OP_CRAND, etc.) are not used, so remove them from insn_type_t.
No functional change.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This puts an attn instruction at offset 0x700 in each of the tests
so that the test will terminate if a program interrupt is taken.
This means that we can implement the tw instruction to cause a
program interrupt.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This adds separate fields in Execute1ToWritebackType for use in
writing SRR0/1 (and in future other SPRs) on an interrupt. With
this, we make timing once again on the Arty A7-100 -- previously
we were missing by 0.2ns, presumably due to the result mux being
wider than before.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This fixes the decrementer, illegal and sc tests to compile
successfully with cross-compilers that don't provide unistd.h
or string.h. Instead of those headers we include stddef.h.
This also fixes tests/Makefile.test to do what one expects
when CROSS_COMPILE is defined in the environment.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Benjamin Herrenschmidt
Paul Mackerras
Michael Neuling