Commit Graph

866 Commits (d1f35705c07d4468b3943467683ca2501731e41c)
 

Author SHA1 Message Date
Paul Mackerras d1f35705c0 loadstore1: Improve timing of data path from cache RAM to writeback
Work out select inputs for writeback mux a cycle earlier.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 54f89afab7 loadstore1: Decide on load formatting controls a cycle earlier
This helps timing.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras c0f282b691 decode1: Implement tlbsync as a no-op
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras d6134babc0 decode1: Implement obsolete dst, dstst, dss instructions as no-ops
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 89a67a18d0 decode: Add a facility field to the instruction decode tables
This makes it simpler to work out when to deliver a FPU unavailable
interrupt.  This also means we can get rid of the OP_FPLOAD and
OP_FPSTORE insn_type values.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras ec5730a75a tests: Add tests for lq/stq and lqarx/stqcx.
Lq and stq are tested in both BE and LE modes (though only 64-bit
mode) by the 'modes' test.

Lqarx and stqcx. are tested by the 'reservation' test in LE mode mode
(64-bit).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 4b2c23703c core: Implement quadword loads and stores
This implements the lq, stq, lqarx and stqcx. instructions.

These instructions all access two consecutive GPRs; for example the
"lq %r6,0(%r3)" instruction will load the doubleword at the address
in R3 into R7 and the doubleword at address R3 + 8 into R6.  To cope
with having two GPR sources or destinations, the instruction gets
repeated at the decode2 stage, that is, for each lq/stq/lqarx/stqcx.
coming in from decode1, two instructions get sent out to execute1.

For these instructions, the RS or RT register gets modified on one
of the iterations by setting the LSB of the register number.  In LE
mode, the first iteration uses RS|1 or RT|1 and the second iteration
uses RS or RT.  In BE mode, this is done the other way around.  In
order for decode2 to know what endianness is currently in use, we
pass the big_endian flag down from icache through decode1 to decode2.
This is always in sync with what execute1 is using because only rfid
or an interrupt can change MSR[LE], and those operations all cause
a flush and redirect.

There is now an extra column in the decode tables in decode1 to
indicate whether the instruction needs to be repeated.  Decode1 also
enforces the rule that lq with RT = RT and lqarx with RA = RT or
RB = RT are illegal.

Decode2 now passes a 'repeat' flag and a 'second' flag to execute1,
and execute1 passes them on to loadstore1.  The 'repeat' flag is set
for both iterations of a repeated instruction, and 'second' is set
on the second iteration.  Execute1 does not take asynchronous or
trace interrupts on the second iteration of a repeated instruction.

Loadstore1 uses 'next_addr' for the second iteration of a repeated
load/store so that we access the second doubleword of the memory
operand.  Thus loadstore1 accesses the doublewords in increasing
memory order.  For 16-byte loads this means that the first iteration
writes GPR RT|1.  It is possible that RA = RT|1 (this is a legal
but non-preferred form), meaning that if the memory operand was
misaligned, the first iteration would overwrite RA but then the
second iteration might take a page fault, leading to corrupted state.
To avoid that possibility, 16-byte loads in LE mode take an
alignment interrupt if the operand is not 16-byte aligned.  (This
is the case anyway for lqarx, and we enforce it for lq as well.)

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 784d409999 dcache: Add more commentary, no code change
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 55f7d99376 decode1: Fix decoding of recommended NOP instruction
We were decoding nop with the wrong major opcode.  Fix it.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 3361c460b8 core_debug: Stop logging 256 cycles after trigger
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 470f1b2140 core_debug: Add an address trigger to stop logging at a given address
This compares the address being fetched with the contents of a
register that can be set via DMI, and if they match, stops the
logging.  Since this works on the address being fetched rather than
executed, it is subject to false positives.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 5535257c71 FPU: Don't use mask generator for rounding
Instead of using the mask generator in the rounding process, this uses
simpler logic to add in a 1 at the appropriate position (bit 2 or bit
31, depending on precision) and mask off the low-order bits.  Since
there are only two positions at which the masking and incrementing
need to be done, we don't need the full generality of the mask
generator.  This reduces the amount of logic and improves timing.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 45c5236700 FPU: Relax timing around multiplier output
At present there is a state transition in the handling of the fmadd
instructions where the next state depends on the sign bit of the
multiplier result.  This creates a critical path which doesn't make
timing on the A7-100.  To fix this, we make the state transition
independent of the sign of the multiplier result, which improves
timing, but means we take one more cycle to do a fmadd-family
instruction in some cases.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras f14e731ec6 mw_debug: Display terminated status when stopping
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 6baf3b519f mw_debug: Extend to handle FPRs
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 2be2440734 Arty A7: Document pin connections for on-board headers
This adds, as comments, lines which would if uncommented define
properties which associate the pins of the headers on the Arty A7
board with FPGA pins.  It also adds properties for LEDs 1--3, also
commented out for now.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras d5cf4acfdb execute1: Update comments about XER forwarding
This deletes some commentary that is now out of date and replaces it
with a simple statement about the XER common bits being forwarded from
the output of execute1 to the input.

The comment being deleted talked about a hazard if an instruction that
modifies XER[SO] is immediately followed by a store conditional.  That
is no longer a problem because the operands for loadstore1 are sent
from execute1 (and therefore have the forwarded value) rather than
decode2.  This was in fact fixed in 5422007f83 ("Plumb loadstore1
input from execute1 not decode2", 2020-01-14).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 5f8279a14a
Merge pull request #263 from antonblanchard/reset-pid
Initialize PID register
4 years ago
Paul Mackerras 45b7312e89
Merge pull request #262 from antonblanchard/reset-tb-decr
Reset TB and DECR
4 years ago
Paul Mackerras 00446a9169
Merge pull request #259 from antonblanchard/dmi-reset
Reset JTAG/DMI
4 years ago
Anton Blanchard 3f1e2b3a4f
Merge pull request #265 from antonblanchard/another-spi-rxtx-reset-issu
Fix another reset issue in spi_rxtx
4 years ago
Anton Blanchard 75be7803b2
Merge pull request #264 from antonblanchard/reset-spi-txrx
Reset cmd_ready_o in spi_txrx
4 years ago
Anton Blanchard 740f013284 Initialize PID register
If the PID register is read before it is written we'll consume
X state data.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard a0eb4eec17 Fix another reset issue in spi_rxtx
counter was X state after reset, initialize it.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard bf9a446e3f Reset cmd_ready_o in spi_txrx
Initialize bit_count so that cmd_ready_o isn't X state immediately
after reset.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard e1bac4d6e7 Reset TB and DECR
We don't care what the values of TB and DECR are after reset, but we
don't want the X state to propagate to other parts of the chip.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard 39c826aa46
Merge pull request #261 from antonblanchard/wishbone_layout
Make wishbone_master_out and wb_io_master_out match
4 years ago
Anton Blanchard ebe696affc
Merge pull request #260 from paulusmack/misc
soc: Drive uart1_irq to 0 when we don't have UART1
4 years ago
Anton Blanchard c6dfc19d89 Make wishbone_master_out and wb_io_master_out match
This makes it easier to parse the records in verilog because they
are getting flattened into an array of bits by ghdl/yosys.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Paul Mackerras e41cb01bca fetch1: Fix debug stop
The ability to stop the core using the debug interface has been broken
since commit bb4332b7e6b5 ("Remove fetch2 pipeline stage"), which
removed a statement that cleared the valid bit on instructions when
their stop_mark was 1.

Fix this by clearing r.req coming out of fetch1 when r.stop_mark = 1.
This has the effect of making i_out.valid be 0 from the icache.  We
also fix a bug in icache.vhdl where it was not honouring i_in.req when
use_previous = 1.

It turns out that the logic in fetch1.vhdl to handle stopping and
restarting was not correct, with the effect that stopping the core
would leave NIA pointing to the last instruction executed, not the
next instruction to be executed.  In fact the state machine is
unnecessary and the whole thing can be simplified enormously - we
need to increment NIA whenever stop_in = 0 in the previous cycle.

Fixes: bb4332b7e6b5 ("Remove fetch2 pipeline stage")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 97586e7e99 soc: Drive uart1_irq to 0 when we don't have UART1
The tools complain about uart1_irq not being driven and not having a
default when HAS_UART1 is false.  This sets it to 0 in that case.

Fixes: 7575b1e0c2 ("uart: Import and hook up opencore 16550 compatible UART")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Anton Blanchard 5eb351b4be Reset JTAG/DMI
request is never initialized and we leak X state control signals to other
parts of the core (eg dmi_wr). Add a reset.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Michael Neuling d96ee21c39
Merge pull request #256 from antonblanchard/flash-reset
Fix a few reset issues in flash controller
4 years ago
Paul Mackerras f4831507b3
Merge pull request #257 from antonblanchard/nofpu-fix
Fully initialize FPU buses when FPU is disabled
4 years ago
Anton Blanchard c870040a20 Fix an issue in flash controller when BOOT_CLOCKS is false
If BOOT_CLOCKS is false we currently get stuck in the flash
state machine. This patch from Ben fixes it.

Also fix an x state issue I see in icarus verilog where we need
to reset auto_state.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard 659be2780f Fully initialize FPU buses when FPU is disabled
Some of the bits in the FPU buses end up as z state. Yosys
flags them, so we may as well clean it up.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard 7c8bc85e44 Fix a few reset issues in flash controller
Our flash controller fails when simulating with iverilog. Looking
closer, both wb_stash and auto_last_addr are X state, and things
fall apart after they get used.

Initialise them both fixes the iverilog issue.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard 081dc64d39
Merge pull request #255 from antonblanchard/log-length
Add LOG_LENGTH to top-generic.vhdl
4 years ago
Anton Blanchard 86bdfe6fd4
Merge pull request #254 from antonblanchard/fix-verilator
Add verilator FPGA target
4 years ago
Anton Blanchard 80cf489e96 Add LOG_LENGTH to top-generic.vhdl
The other top level files allow LOG_LENGTH to be configured.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard df8e1ca2a7 Add verilator FPGA target
Our Makefiles need some work, but for now create an FPGA target:

make FPGA_TARGET=verilator microwatt-verilator

ghdl and yosys can use containers using PODMAN=1 or DOCKER=1
options.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard 62d5b16c66
Merge pull request #253 from antonblanchard/fix-verilator
Fix verilator build
4 years ago
Anton Blanchard 4bc5169f78 Fix verilator build
yosys and verilator did not like us passing in the verilog and
exporting it again. Pass the source directly to verilator instead.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Michael Neuling 77c03e5d42
Merge pull request #252 from antonblanchard/hello-world-in-8k
Reduce hello_world footprint to fit in 8kB
4 years ago
Anton Blanchard 605010e33d Fix ghdl warning due to variable shadowing in icache
Fix a couple of ghdl warnings:

icache.vhdl:387:21⚠️ declaration of "i" hides constant "i" [-Whide]
icache.vhdl:400:17⚠️ declaration of "i" hides constant "i" [-Whide]

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard bc4e6b7efe Reduce hello_world footprint to fit in 8kB
When building with yosys we assume hello_world fits in 8kB. There's
enough free space that we can adjust the linker script to make it fit.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Michael Neuling 16da9b5ba7
Merge pull request #249 from paulusmack/master
Sundry bug fixes, plus implement mtmsr
4 years ago
Michael Neuling b60026e7c1
Merge pull request #250 from umarcor/containers
makefile: update synthesis containers
4 years ago
Michael Neuling d839037f0b
Merge pull request #251 from umarcor/ci/containers
ci: use job.container
4 years ago
umarcor 93b2987b19 ci: use job.container
Signed-off-by: umarcor <unai.martinezcorral@ehu.eus>
4 years ago