"-b ecp5" will select ECP5 interface that talks to a JTAGG
primitive.
For example with a FT232H JTAG board:
./mw_debug -t 'ft2232 vid=0x0403 pid=0x6014' -s 30000000 -b ecp5 mr ff003888 6
Connected to libftdi driver.
Found device ID: 0x41113043
00000000ff003888: 6d6f636c65570a0a ..Welcom
00000000ff003890: 63694d206f742065 e to Mic
00000000ff003898: 2120747461776f72 rowatt !
00000000ff0038a0: 0000000000000a0a ........
00000000ff0038a8: 67697320636f5320 Soc sig
00000000ff0038b0: 203a65727574616e nature:
Core: running
NIA: c0000000000187f8
MSR: 9000000000001033
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
This uses the JTAGG primitive which is similar to BSCANE2.
The LUT4 delay approach came from Florian and Greg in
https://github.com/enjoy-digital/litex/pull/1087
Has been tested on an OrangeCrab with 48MHz sysclk
FT232H up to 30MHz (though libusb/urjtag is by far the bottleneck vs
the JTAG clock)
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
liburjtag isn't in Debian, so usually we're pointing at a urjtag
build directory when building mw_debug
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
This moves the calculation of the result for popcnt* into the
countbits unit, renamed from countzero, so that we can take two cycles
to get the result. The motivation for this is that the popcnt*
calculation was showing up as a critical path.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Orangecrab missed out on:
Make wishbone addresses be in units of doublewords or words
Author: Paul Mackerras <paulus@ozlabs.org>
Date: Wed Sep 15 18:18:09 2021 +1000
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Modifies litescard generate script to take a clock speed.
Regenerated verilog with latest litesdcard
e52c731 ("Bump year.")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Reduce litedram NUM_LINES 64->8
This allows us to meet timing. Can probably
be improved in future with better BRAM usage.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
top-orangecrab0.2 is a copy of top-arty with various changes.
USRMCLK is added for the SPI clock
ethernet is removed
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Parameters are based on
https://github.com/gregdavill/OrangeCrab-test-sw/blob/main/hw/OrangeCrab-bitstream.py
and litex-boards orangecrab.py
rtt_nom and cmd_delay are overridden for OrangeCrab, we do the same here.
Generated with litedram and litex
62abf9c ("litedram_gen: Add block_until_ready port parameter to control blocking behaviour.")
add2746a ("tools/litex_cli: Rename wb to bus.")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Recent litedram gets stuck at memtest unless block_until_ready=False.
(discussion in https://github.com/enjoy-digital/litedram/pull/292)
This change regenerates with latest litedram and litex
62abf9c ("litedram_gen: Add block_until_ready port parameter to control blocking behaviour.")
add2746a ("tools/litex_cli: Rename wb to bus.")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Yosys changed command line behaviour following the v0.12 release. Work
around this by using read_verilog, which maintains the old behaviour.
This should work fine for current yosys and be compatible with
future releases.
See https://github.com/YosysHQ/yosys/issues/3109
Signed-off-by: Joel Stanley <joel@jms.id.au>
At present, code (such as simple_random) which produces serial port
output during the first few milliseconds of operation produces garbled
output. The reason is that the clock has not yet stabilized and is
running slow, resulting in the bit time of the serial characters being
too long.
The ECP5 data sheet says that the phase detector should be operated
between 10 and 400 MHz. The current code operates it at 2MHz.
Consequently, the PLL lock indication doesn't work, i.e. it is always
zero. The current code works around that by inverting it, i.e. taking
the "not locked" indication to mean "locked".
Instead, we now run it at 12MHz, chosen because the common external
clock inputs on ECP5 boards are 12MHz and 48MHz. Normally this would
mean that the available system clock frequencies would be multiples of
12MHz, but this is a little inconvenient as we use 40MHz on the Orange
Crab v0.21 boards. Instead, by using the secondary clock output for
feedback, we can have any divisor of the PLL frequency as the system
clock frequency.
The ECP5 data sheet says the PLL oscillator can run at 400 to 800
MHz. Here we choose 480MHz since that allows us to generate 40MHz and
48MHz easily and is a multiple of 12MHz.
With this, the lock signal works correctly, and the inversion can be
removed.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The existing orange crab target is for an older board with a
LFE5UM5G-85F device. Newer orange crab boards (v0.21) have a
LFE5U-85F device in the -8 speed grade, so make a new target for them
called ORANGE-CRAB-0.21.
Also add flags to ecppack to indicate that the bitstream should be
compressed and can be loaded at 38.8MHz.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
These convert addresses to/from wishbone addresses, and use them
in parts of the caches, in order to make the code a bit more readable.
Along the way, rename some functions in the caches to make it a bit
clearer what they operate on and fix a bug in the icache STOP_RELOAD state where
the wb address wasn't properly converted.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This moves REAL_ADDR_BITS out of the caches and defines a real_addr_t
type for a real address, along with a addr_to_real() conversion helper.
It makes the vhdl a bit more readable
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
We have a bug where an store near a dcbz can cause the dcbz to only zero
8 bytes. Add a test case for this.
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
Note: There are a few patches to upstream to fix an upstream breakage
of litedram standalone generator, and fix some issues with liteeth
in the way it's used on Wukong. All these have pending pull requests.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
For now only the V2 of the board (slightly different pinout)
and only the A100T variant. I also haven't added GPIOs or anything
else on the PMODs really.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This fixes a bug where a dcbz can get incorrectly handled as an
ordinary 8-byte store if it arrives while the dcache state machine is
handling other stores with the same tag value (i.e. within the same
set-sized area of memory). The logic that says whether to include a
new store in the current wishbone cycle didn't take into account
whether the new store was a dcbz. This adds a "req.dcbz = '0'" factor
so that it does. This is necessary because dcbz is handled more like
a cache line refill (but writing to memory rather than reading) than
an ordinary store.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This fixes two bugs in the flash invalidation of the icache.
The first is that an instruction could get executed twice. The
i-cache RAM is 2 instructions (64 bits) wide, so one read can supply
results for 2 cycles. The fetch1 stage tells icache when the address
is equal to the address of the previous cycle plus 4, and in cases
where that is true, bit 2 of the address is 1, and the previous cycle
was a cache hit, we just use the second word of the doubleword read
from the cache RAM. However, the cache hit/miss logic also continues
to operate, so in the case where the first word hits but the second
word misses (because of an icache invalidation or a snoop occurring in
the first cycle), we supply the instruction from the data previously
read from the icache RAM but also stall fetch1 and start a cache
reload sequence, and subsequently supply the second instruction
again. This fixes the issue by inhibiting req_is_miss and stall_out
when use_previous is true.
The second bug is that if an icache invalidation occurs while
reloading a line, we continue to reload the line, and make it valid
when the reload finishes, even though some of the data may have been
read before the invalidation occurred. This adds a new state
STOP_RELOAD which we go to if an invalidation happens while we are in
CLR_TAG or WAIT_ACK state. In STOP_RELOAD state we don't request any
more reads from memory and wait for the reads we have previously
requested to be acked, and then go to IDLE state. Data returned is
still written to the icache RAM, but that doesn't matter because the
line is invalid and is never made valid.
Note that we don't have to worry about invalidations due to snooped
writes while reloading a line, because the wishbone arbiter won't
switch to another master once it has started sending our reload
requests to memory. Thus a store to memory will either happen before
any of our reads have got to memory, or after we have finished the
reload (in which case we will no longer be in WAIT_ACK state).
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Matt Johnston
Paul Mackerras
Michael Neuling