cores
/
microwatt
mirror of https://github.com/antonblanchard/microwatt
3
1
Fork 1
Code Issues Projects Releases Wiki Activity
A tiny Open POWER ISA softcore written in VHDL 2008
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1,280 Commits
39 Branches
0 Tags
66 MiB
Verilog 81.8%
VHDL 14.3%
C 2.9%
Assembly 0.5%
Makefile 0.2%
Other 0.2%
 
 
 
 
 
 
master
caravel-mpw7-20221125
caravel-mpw7-20220822
branch-alias
trace-test
gitignore
litedram-update
liteeth-update
fix-sdcard
fpu-init
loadstore-init
core_debug-init
icache-unused-sig
icache-insn-u-state
dcache-unused-sig
unused-sig
divider-init
loadstore-pmu-init
icache-pmu-events
fpu-typo
less-fpga-init
caravel-mpw6-20220530
caravel-mpw5-20220323
caravel-mpw5-20220322
alt-reset-address
log2ceil-issue
fpu-constant
asic-3
boxarty-20211011
icbi-issue
orange-crab-freq
dcache-nc-fix
remove-potato-uart
cache-tlb-parameters-2
caravel-20210114
caravel-20210105
jtag-port-2
jtag-port
nia-debug
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '39ca675ce3'
${ noResults }
Go to file
Paul Mackerras 39ca675ce3 Decode prefixed instructions 
This adds logic to do basic decoding of the prefixed instructions
defined in PowerISA v3.1B which are in the SFFS (Scalar Fixed plus
Floating-Point Subset) compliancy subset.  In PowerISA v3.1B SFFS,
there are 14 prefixed load/store instructions plus the prefixed no-op
instruction (pnop).  The prefixed load/store instructions all use an
extended version of D-form, which has an extra 18 bits of displacement
in the prefix, plus an 'R' bit which enables PC-relative addressing.

When decode1 sees an instruction word where the insn_code is
INSN_prefix (i.e. the primary opcode was 1), it stores the prefix word
and sends nothing down to decode2 in that cycle.  When the next valid
instruction word arrives, it is interpreted as a suffix, meaning that
its insn_code gets modified before being used to look up the decode
table.

The insn_code values are rearranged so that the values for
instructions which are the suffix of a valid prefixed instruction are
all at even indexes, and the corresponding prefixed instructions
follow immediately, so that an insn_code value can be converted to the
corresponding prefixed value by setting the LSB of the insn_code
value.  There are two prefixed instructions, pld and pstd, for which
the suffix is not a valid SFFS instruction by itself, so these have
been given dummy insn_code values which decode as illegal (INSN_op57
and INSN_op61).

For a prefixed instruction, decode1 examines the type and subtype
fields of the prefix and checks that the suffix is valid for the type
and subtype.  This check doesn't affect which entry of the decode
table is used; the result is passed down to decode2, and will in
future be acted upon in execute1.

The instruction address passed down to decode2 is the address of the
prefix.  To enable this, part of the instruction address is saved when
the prefix is seen, and then the instruction address received from
icache is partly overlaid by the saved prefix address.  Because
prefixed instructions are not permitted to cross 64-byte boundaries,
we only need to save bits 5:2 of the instruction to do this.  If the
alignment restriction ever gets relaxed, we will then need to save
more bits of the address.

Decode2 has been extended to handle the R bit of the prefix (in 8LS
and MLS forms) and to be able to generate the 34-bit immediate value
from the prefix and suffix.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
 		1 year ago
.github/workflows syscon: Implement a register for storing git hash info 2 years ago
constraints orangecrab: add Orange Crab r0.2 target 3 years ago
fpga arty: Add software reset from syscon 2 years ago
hello_world hello_world: Debug print the gitinfo syscon register 2 years ago
include Move alt_reset to syscon 2 years ago
lib console: Add support for the 16550 UART 4 years ago
litedram Regenerate litedram with updated sdram init 2 years ago
liteeth Regenerate litedram and liteeth 3 years ago
litesdcard litesdcard: Fix and regenerate Verilog 2 years ago
media Add title image 5 years ago
micropython tests: Add updated micropython build with 16550 support 4 years ago
openocd Merge pull request #406 from shingarov/spi-kintex 2 years ago
rust_lib_demo console: Cleanup console API 4 years ago
scripts syscon: Implement a register for storing git hash info 2 years ago
sim-unisim Add a debug (DMI) bus and a JTAG interface to it on Xilinx FPGAs 5 years ago
tests tests: Update metavalues test count 2 years ago
uart16550 Bundle the uart16550 core file 2 years ago
verilator verilator: Specify top level module 3 years ago
.gitignore Ignore vunit_out in git 2 years ago
LICENSE Initial import of microwatt 5 years ago
Makefile Fix plru_tb to use the new plrufn and take out the old plru.vhdl 2 years ago
README.md README: Add Linux on Microwatt instructions 3 years ago
cache_ram.vhdl dcache: Reduce metavalue warnings 2 years ago
common.vhdl Decode prefixed instructions 1 year ago
control.vhdl Track hazards explicitly for XER overflow bits 2 years ago
core.vhdl Remove option for "short" 16x16 bit multiplier 2 years ago
core_debug.vhdl core_debug: Reduce metavalue warnings 2 years ago
core_dram_tb.vhdl Move alt_reset to syscon 2 years ago
core_flash_tb.vhdl Reformat testbenches 4 years ago
core_tb.vhdl Reformat testbenches 4 years ago
countbits.vhdl Allow integer instructions and load/store instructions to execute together 2 years ago
countbits_tb.vhdl Add a second execute stage to the pipeline 2 years ago
cr_file.vhdl execute1: Restructure to separate out execution of side effects 2 years ago
crhelpers.vhdl crhelpers: Constraint "crnum" integer 5 years ago
dcache.vhdl dcache: Update PLRU on misses as well as hits 2 years ago
dcache_tb.vhdl Fix dcache_tb (and add dump of victim way to dcache) 2 years ago
decode1.vhdl Decode prefixed instructions 1 year ago
decode2.vhdl Decode prefixed instructions 1 year ago
decode_types.vhdl Decode prefixed instructions 1 year ago
divider.vhdl Add a second execute stage to the pipeline 2 years ago
divider_tb.vhdl Replaced VHDL assert and report with VUnit checking and logging 4 years ago
dmi_dtm_dummy.vhdl Fix build issue in dmi_dtm_dummy.vhdl 5 years ago
dmi_dtm_ecp5.vhdl dmi_dtm_ecp5: Use ECP5 JTAGG for DMI 3 years ago
dmi_dtm_tb.vhdl Reformat testbenches 4 years ago
dmi_dtm_xilinx.vhdl Fix some whitespace issues 3 years ago
dram_tb.vhdl Move alt_reset to syscon 2 years ago
execute1.vhdl Move insn_codes for mcrfs, mtfsb0/1 and mtfsfi 1 year ago
fetch1.vhdl fetch1: Change the way predictions from the BTC are sent downstream 1 year ago
foreign_random.vhdl Make core testbenches recognized by VUnit 4 years ago
fpu.vhdl Change the multiplier interface to support signed multipliers 2 years ago
git.vhdl.in syscon: Implement a register for storing git hash info 2 years ago
glibc_random.vhdl Reformat glibc_random 5 years ago
glibc_random_helpers.vhdl Reformat glibc_random 5 years ago
gpio.vhdl Remove some FPGA style signal inits 3 years ago
helpers.vhdl Metavalue cleanup for helpers.vhdl 2 years ago
icache.vhdl fetch1: Change the way predictions from the BTC are sent downstream 1 year ago
icache_tb.vhdl fix: fix icache_tb not finishing correctly 3 years ago
icache_test.bin icache_tb: Improve test and include test file 5 years ago
insn_helpers.vhdl Decode prefixed instructions 1 year ago
loadstore1.vhdl loadstore1: Reduce metavalue warnings 2 years ago
logical.vhdl Finish off taking SPRs out of register file 2 years ago
microwatt.core Merge pull request #415 from ozbenh/uart16550-core 2 years ago
mmu.vhdl Metavalue cleanup for mmu.vhdl 2 years ago
multiply-32s.vhdl Change the multiplier interface to support signed multipliers 2 years ago
multiply.vhdl Change the multiplier interface to support signed multipliers 2 years ago
multiply_tb.vhdl multiply_tb: Fix multiply_tb.vhdl for the new multiplier interface 2 years ago
nonrandom.vhdl Add random number generator and implement the darn instruction 4 years ago
plru_tb.vhdl Fix plru_tb to use the new plrufn and take out the old plru.vhdl 2 years ago
plrufn.vhdl icache: Split PLRU into storage and logic 2 years ago
pmu.vhdl Metavalue cleanup for pmu.vhdl 2 years ago
ppc_fx_insns.vhdl Fix some whitespace issues 3 years ago
predecode.vhdl Decode prefixed instructions 1 year ago
random.vhdl Make core testbenches recognized by VUnit 4 years ago
register_file.vhdl Metavalue cleanup for register_file.vhdl 2 years ago
rotator.vhdl Metavalue cleanup for rotator.vhdl 2 years ago
rotator_tb.vhdl Replaced VHDL assert and report with VUnit checking and logging 4 years ago
run.py Add vhdl_ls.toml dump to run.py 2 years ago
sim_16550_uart.vhdl uart: Add a simulation model for the 16550 compatible UART 4 years ago
sim_bram.vhdl Rename 'do' signal to avoid verilator System Verilog warning 3 years ago
sim_bram_helpers.vhdl ram: Rework main RAM interface 5 years ago
sim_bram_helpers_c.c Consolidate VHPI code 5 years ago
sim_console.vhdl Reformat sim_console 5 years ago
sim_console_c.c sim_console: Fix polling to check for POLLIN 4 years ago
sim_jtag.vhdl Add jtag support in simulation via a socket 5 years ago
sim_jtag_socket.vhdl Add jtag support in simulation via a socket 5 years ago
sim_jtag_socket_c.c Consolidate VHPI code 5 years ago
sim_no_flash.vhdl spi: Add simulation support 5 years ago
sim_pp_uart.vhdl uart: Rename sim_uart.vhdl to sim_pp_uart.vhdl 4 years ago
sim_vhpi_c.c Consolidate VHPI code 5 years ago
sim_vhpi_c.h Consolidate VHPI code 5 years ago
soc.vhdl Merge pull request #409 from CodeConstruct/dev/soc-reset 2 years ago
spi_flash_ctrl.vhdl Remove some FPGA style signal inits 3 years ago
spi_rxtx.vhdl Remove some FPGA style signal inits 3 years ago
sync_fifo.vhdl litedram: Add an L2 cache with store queue 5 years ago
syscon.vhdl Move alt_reset to syscon 2 years ago
utils.vhdl litedram: Add support for booting without BRAM 5 years ago
wishbone_arbiter.vhdl wb_arbiter: Early master selection 5 years ago
wishbone_bram_tb.bin ram: Rework main RAM interface 5 years ago
wishbone_bram_tb.vhdl Make wishbone addresses be in units of doublewords or words 3 years ago
wishbone_bram_wrapper.vhdl wishbone_bram_wrapper ram_addr_bits is 1 bit off 3 years ago
wishbone_debug_master.vhdl Make wishbone addresses be in units of doublewords or words 3 years ago
wishbone_types.vhdl Introduce addr_to_wb() and wb_to_addr() helpers 3 years ago
writeback.vhdl writeback: Eliminate unintentional inferred latch 2 years ago
xics.vhdl xics: Fix -Whide warnings 2 years ago
xilinx-mult-32s.vhdl Change the multiplier interface to support signed multipliers 2 years ago
xilinx-mult.vhdl Change the multiplier interface to support signed multipliers 2 years ago

README.md

Microwatt

Microwatt

A tiny Open POWER ISA softcore written in VHDL 2008. It aims to be simple and easy to understand.

Simulation using ghdl

MicroPython running on Microwatt

You can try out Microwatt/Micropython without hardware by using the ghdl simulator. If you want to build directly for a hardware target board, see below.

  • Build micropython. If you aren't building on a ppc64le box you will need a cross compiler. If it isn't available on your distro grab the powerpc64le-power8 toolchain from https://toolchains.bootlin.com. You may need to set the CROSS_COMPILE environment variable to the prefix used for your cross compilers. The default is powerpc64le-linux-gnu-.
git clone https://github.com/micropython/micropython.git
cd micropython
cd ports/powerpc
make -j$(nproc)
cd ../../../

A prebuilt micropython image is also available in the micropython/ directory.

  • Microwatt uses ghdl for simulation. Either install this from your distro or build it. Microwatt requires ghdl to be built with the LLVM or gcc backend, which not all distros do (Fedora does, Debian/Ubuntu appears not to). ghdl with the LLVM backend is likely easier to build.

    If building ghdl from scratch is too much for you, the microwatt Makefile supports using Docker or Podman.

  • Next build microwatt:

git clone https://github.com/antonblanchard/microwatt
cd microwatt
make

To build using Docker:

make DOCKER=1

and to build using Podman:

make PODMAN=1
  • Link in the micropython image:
ln -s ../micropython/ports/powerpc/build/firmware.bin main_ram.bin

Or if you were using the pre-built image:

ln -s micropython/firmware.bin main_ram.bin
  • Now run microwatt, sending debug output to /dev/null:
./core_tb > /dev/null

Synthesis on Xilinx FPGAs using Vivado

  • Install Vivado (I'm using the free 2019.1 webpack edition).

  • Setup Vivado paths:

source /opt/Xilinx/Vivado/2019.1/settings64.sh
  • Install FuseSoC:
pip3 install --user -U fusesoc

Fedora users can get FuseSoC package via

sudo dnf copr enable sharkcz/danny
sudo dnf install fusesoc
  • If this is your first time using fusesoc, initialize fusesoc. This is needed to be able to pull down fussoc library components referenced by microwatt. Run
fusesoc init
fusesoc fetch uart16550
fusesoc library add microwatt /path/to/microwatt
  • Build using FuseSoC. For hello world (Replace nexys_video with your FPGA board such as --target=arty_a7-100): You may wish to ensure you have installed Digilent Board files or appropriate files for your board first.
fusesoc run --target=nexys_video microwatt --memory_size=16384 --ram_init_file=/path/to/microwatt/fpga/hello_world.hex

You should then be able to see output via the serial port of the board (/dev/ttyUSB1, 115200 for example assuming standard clock speeds). There is a know bug where initial output may not be sent - try the reset (not programming button) on your board if you don't see anything.

  • To build micropython (currently requires 1MB of BRAM eg an Artix-7 A200):
fusesoc run --target=nexys_video microwatt

Linux on Microwatt

Mainline Linux supports Microwatt as of v5.14. The Arty A7 is the best tested platform, but it's also been tested on the OrangeCrab and ButterStick.

  1. Use buildroot to create a userspace

    A small change is required to glibc in order to support the VMX/AltiVec-less Microwatt, as float128 support is mandiatory and for this in GCC requires VSX/AltiVec. This change is included in Joel's buildroot fork, along with a defconfig:

    git clone -b microwatt https://github.com/shenki/buildroot
cd buildroot
make ppc64le_microwatt_defconfig
make

    The output is output/images/rootfs.cpio.

  2. Build the Linux kernel

    git clone https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
cd linux
make ARCH=powerpc microwatt_defconfig
make ARCH=powerpc CROSS_COMPILE=powerpc64le-linux-gnu- \
  CONFIG_INITRAMFS_SOURCE=/buildroot/output/images/rootfs.cpio -j`nproc`

    The output is arch/powerpc/boot/dtbImage.microwatt.elf.

  3. Build gateware using FuseSoC

    First configure FuseSoC as above.

    fusesoc run --build --target=arty_a7-100 microwatt --no_bram --memory_size=0

    The output is build/microwatt_0/arty_a7-100-vivado/microwatt_0.bit.

  4. Program the flash

    This operation will overwrite the contents of your flash.

    For the Arty A7 A100, set FLASH_ADDRESS to 0x400000 and pass -f a100.

    For the Arty A7 A35, set FLASH_ADDRESS to 0x300000 and pass -f a35.

    microwatt/openocd/flash-arty -f a100 build/microwatt_0/arty_a7-100-vivado/microwatt_0.bit
microwatt/openocd/flash-arty -f a100 dtbImage.microwatt.elf -t bin -a $FLASH_ADDRESS

  5. Connect to the second USB TTY device exposed by the FPGA

    minicom -D /dev/ttyUSB1

    The gateware has firmware that will look at FLASH_ADDRESS and attempt to parse an ELF there, loading it to the address specified in the ELF header and jumping to it.

Testing

  • A simple test suite containing random execution test cases and a couple of micropython test cases can be run with:
make -j$(nproc) check

Issues

  • There are a few instructions still to be implemented:
    • Vector/VMX/VSX